Hornady Lock N Load LNL AP Press - Part 4 - Control Panel

  Рет қаралды 28,902

HornadyLoader

HornadyLoader

Күн бұрын

Пікірлер: 28
@jackwebb5917
@jackwebb5917 6 жыл бұрын
I want to thank you for all the great videos. I started on a rockchucker single stage, moved to an RCBS pro 2000, got a Redding T7 for rifle and just ordered an LNL AP after seriously looking at the Dillon XL650. After much research, looking at what would work for ME, and A LOT based on your videos I went with the LNL. What kept bugging me was all the haters of anything not Dillon ragging on other people that dared not get a Dillon!! Don’t get me wrong I truly believe Dillon makes an awesome press... but anyone that will make a blanket statement without asking or considering an individual’s particular needs... I find their criticism suspect. Anyway, I digress. I sincerely thank you for taking the time to clearly explain the good and the bad of the LNL and how to fix it... and I hope to add a bullet and case feeder in the future. I want to learn the press and it’s quirks and then add more to it. That way I can isolate problems better. Thank you again!!
@lifelonglearner6404
@lifelonglearner6404 9 жыл бұрын
Just finished watching the complete series. You did an outstanding job! I have not had any experience with the Hornady progressive press, but now I think I could sell them.
@hornadyloader7574
@hornadyloader7574 9 жыл бұрын
+lifelong learner LOL, that's great lifelong learner! That was the intent of the series. Thanks for watching!
@bunnyfartloads
@bunnyfartloads 7 жыл бұрын
I recently have found your channel and subscribed. You really go into detail about all the products you use. It is also very telling that even though you use almost Hornady products exclusively you would recommend a Dillon press to your viewer. This speaks volumes to me about the honesty on all the products you review. Myself I have been doing as much research as I can before purchasing a progressive press. I still have not made up my mind. Both the lock n load and dillon seem to do what I will need it is a hard decision. Thanks for you videos keep up the good work.
@romansten9
@romansten9 6 жыл бұрын
Nice video. The original price for the deluxe model may seem high at $200. But many places have it on sale for around $170. Then you get 500 free bullets. That's worth $110+. You could keep the bullets or sell them for $100. Net price=$70 for the control panel
@richardrongve9141
@richardrongve9141 9 жыл бұрын
Great video. You mentioned modifying powder cop to work with rifle. Do you have a video showing this? Keep up the great work
@FlyfishermanMike
@FlyfishermanMike 6 жыл бұрын
I enjoyed this very thorough video! I just bought this press and was curious how the sensors worked. Being cheap it seems like I could duplicate this for the fraction of the cost as I have more time than money. It wouldn't be as clean though. Is the whole powder lock die different from the normal powder cop or just an add on? Again, nicely done. I'll watch your other vids now.
@whitewolf6730
@whitewolf6730 6 жыл бұрын
Hey, where did you get the dome light? Thanks!
@jasonkrohn5416
@jasonkrohn5416 5 жыл бұрын
I think it’s funny how people used to put up theses Disclaimers. 😂
@yanchen1626
@yanchen1626 5 жыл бұрын
can you comment on how to set up the powder safeguard die please at next video? I could not have it set up correctly and the tech at hornady also seems to be puzzled. Thanks.
@rulon152
@rulon152 9 жыл бұрын
Hello, I've just finished watching your complete series on the Lnl Ap just now. You did a fantastic job! Thank you very much. I've been reloading for 10 years on a lee classic turret and am ready to upgrade. I'm going to set it up primarily for 223. I'm likely going to purchase the case feeder as well and wait on the bullet feeder until later. I have a question though... I know I'll need the small rifle plate for the case feeder and the 223 shell plate. Will I need anything else to get it running? Do you have any recommendations on additional or replacement parts to have on hand? I'll be using my current dies. Thanks!!!
@hornadyloader7574
@hornadyloader7574 9 жыл бұрын
rulon152 Hi Rulon, That's great! I'm sure you'll love it as much as I do! You should be set with the shell plate, dies, and rifle plate. Just be sure it comes with enough LNL bushings for your dies, powder measure etc. As far as spare parts, I would pick up a package of the shell plate springs, they come in packs of 3 for under $10. Those seem to get damaged sometimes. Also, the primer slide may come apart (the axle for the little wheel comes out), I have spares, but I found that a tiny drop of Gorilla Glue in the hole will fix it up just fine. Just don't get glue in the wheel mechanism. Hornady will replace em if you call tech support, but I use the glue these days, it's much faster. I've had mine for almost 20 years, they're built to last. Let me know if there's any other questions I can help with. Hornady Loader
@hornadyloader7574
@hornadyloader7574 9 жыл бұрын
rulon152 I'm uploading a new video, Part 1a of the LNL AP Press series that should answer your question a little better.
@williamarquett5948
@williamarquett5948 6 жыл бұрын
I have been watching several of you videos and noticed a metal holder for the dies and shell plates. Can you tell me where to get them Thanks for the very informative videos
@knightdive1
@knightdive1 4 жыл бұрын
Check Inline Fabrication for the die holders
@MrVideoyoulike
@MrVideoyoulike 7 жыл бұрын
if you pull the cable from the connector and not by the wire you should be fine.
@rogermays3136
@rogermays3136 4 жыл бұрын
How wide does a table need to be with your set up
@MrJeffreyg
@MrJeffreyg 4 жыл бұрын
I just installed my powder checker and noticed that the brass rod is picking up quite a bit of the powder. How are you dealing with that?
@aznazguy
@aznazguy 4 жыл бұрын
If it's static, wipe it down with a dryer sheet.
@MrJeffreyg
@MrJeffreyg 4 жыл бұрын
@@aznazguy thanks!
@oneanon
@oneanon 7 жыл бұрын
Quick question what do you think of the dillon vs the hornady I currently have a lee. I am ready for an upgrade
@hornadyloader7574
@hornadyloader7574 7 жыл бұрын
Hi Alexander, Well, obviously I'm a big fan of Hornady and have had nothing but good luck with their products. That being said, my personal opinion is that the Dillon presses are top-notch. If it were me, I'd probably go with a Dillon. I think you'll be happy either way, but at this time, I'm going to recommend Dillon. Thanks for watching! - HL
@richlabombard6780
@richlabombard6780 5 жыл бұрын
HornadyLoader really wish you could explain: why?
@DonziGT230
@DonziGT230 6 жыл бұрын
How does the powder checker stop the press?
@Dougwoz1
@Dougwoz1 2 жыл бұрын
This item is discontinued, and no longer available.
@whenboysetsfire1
@whenboysetsfire1 8 жыл бұрын
has anyone automated the lock n load yet?
@hornadyloader7574
@hornadyloader7574 8 жыл бұрын
+whenboysetsfire1 Not that I'm aware of. I've seen several Dillon systems with automated gear running them. So cool. I'm not sure I trust an automated system though. I like to check on things randomly while I'm loading, powder charges, primer seating, COAL/CBTO, etc., etc., etc...
@mitchellowen8821
@mitchellowen8821 3 жыл бұрын
Sounds like a pain in the ass
Hornady Lock N Load LNL AP Press - Part 3b - Rifle Bullet Feeder Die
27:21
Hornady Lock N Load LNL AP Press - Part 2 - Case Feeder
22:22
HornadyLoader
Рет қаралды 35 М.
SCHOOLBOY. Мама флексит 🫣👩🏻
00:41
⚡️КАН АНДРЕЙ⚡️
Рет қаралды 7 МЛН
Magic or …? 😱 reveal video on profile 🫢
00:14
Andrey Grechka
Рет қаралды 83 МЛН
Dillon XL650 vs Hornady LNL AP. Which one is best?
15:05
brandon4256
Рет қаралды 156 М.
Hornady Lock-N-Load Fixes and Mods
9:59
JB P
Рет қаралды 61 М.
Hornady LNL AP Press Set Up Hints and Tricks, Part 4
29:47
76Highboy Weight Training
Рет қаралды 38 М.
Hornady Powder Measures - In Depth
37:19
HornadyLoader
Рет қаралды 45 М.
How To Set Up the Hornady Lock-n-Load Progressive Reloading Press
13:26
Brownells, Inc.
Рет қаралды 205 М.
Upgrades to the Hornady lock-n-load A/P Ammo Plant
14:21
Cold Bore Contraptions
Рет қаралды 3,1 М.
Hornady LnL AP - Yet Another Priming Fix 2
17:09
Exploring One Mine At A Time
Рет қаралды 14 М.
Hornady Lock N Load LNL AP Press -  Part 3 -  Bullet Feeders
25:00
HornadyLoader
Рет қаралды 30 М.
Hornady A.P. Loader- What you need that ISN'T advertised
13:07
SCHOOLBOY. Мама флексит 🫣👩🏻
00:41
⚡️КАН АНДРЕЙ⚡️
Рет қаралды 7 МЛН