Hornby Class 14xx GWR Tank Engine : Repair Request?

[@terutend077]

thanks to this video I was able to see how to remove the body from the chassis, was very confused about the pipes up until now. The one I got has clearly never seen a running life because it's so clean inside, so I wanted to get her greased up at least so she's ready when my tracks arrive

[@RGJTrains]

I had a similar one, purchased for a tenner, a friend got it running after sorting the motor and a full lube, looks great

[@trr94001]

I wonder if the owner has code 83 track. Those older Hornby flanges are pretty deep.

[@alfiewenn9440]

i have 3 1 of each on code 75 none of them run on sleepers

[@seanwaddingham6985]

Enjoyed "Doon the Lum"? As in the benediction , "Lang may your Lum Reek". ( May your chimney continue to smoke ie stay healthy and hearty) Also "shoogled" shaking, swaying or unstable. Happy Burns Night tomorrow!

[@User-3O3]

Beautiful model and lovely runner. I love the Hornby ex-Dapol ex-Airfix 1400 Class.

[@johnjephcote7636]

I replaced the entire underframe (motor/wheels/coupling rods/frames) by my own scratchbuilding in order to convert one to EM. The balancing/springing of the rear truck took a very long time to sort out and an 0-4-2 arrangement is a really difficult one to get right, especially with a light plastic body.

[@paulcherrytrains3339]

Great repair video. As far as I'm aware all the 14XX bodies fit the same way. All mine run well. I have kept the traction tyres. They are great with the autocoaches. Cheers Paul.

[@dfishpool7052]

The similarity with the Airfix 14XX and the Hornby 14XX may be as a result of Hornby acquiring Airfix at some point. I have a couple of Airfix 'Praries' and they have the plastic insulation to protect the pickups from the chassis as you found in the 14XX. Thank you Bill for yet another informatie and entertaining video.

[@PeterJewell2]

I first encountered those insulation strips on an Airfix Prairie. Fiendishly difficult to get everything lined up on reassembly!

[@jdenm8]

They're similar because, as you suspect, they're effectively the same model (Though Hornby did simplify the drive mechanism). Airfix introduced it in 1978, but when they went broke in 1981 they sold their Ready to Run tooling to Palitoy. Palitoy then integrated everything into their Mainline line. When General Mills decided to exit toys and wind up Palitoy in 1985, the former Airfix tooling was sold to Dapol. Dapol then sold the tooling to Hornby in 1996. A surprising amount of the Airfix models are still made brand-new today. Hornby's (full price!) Mk2d-f are Airfix's 1976/77 range ones, as is the Lowmac most recently used for the Coke Bottle.

[@dfishpool7052]

@@PeterJewell2 I totally agree - very fiddly!!! I've been trying to get hold of replacement sanding tubes for the Prairies but no one seems to stock them - I was wondering if they were available for the 14XX - it looks as if they are the same.

[@PeterJewell2]

@@dfishpool7052 - I have two Airfix 61xx's sitting on my bench just now, and neither have any pipes from the sand boxes - didn't even realise they were missing! Wouldn't a short piece of brass wire do the trick?

[@dfishpool7052]

@@PeterJewell2 Probably but I just wanted to buy replacements an push them into place but since they don't seem to be available I weill take up your suggestion - thanks.

[@donniblanco5239]

Brill - Great little engine - Good tips Bill - Many thanks 🙏🏻👍🏻

[@learn_with_gern]

Great work Bill. I've had a few Hornby 14xx models over the years and the ones with Type 7 motors always have a noticeable motor/gear noise as they run, even in new or serviced shape.

[@kiwimunster]

My new favourite Scottish word - skoosh. I'm trying to use it whenever I can from now on 🙂

[@modelrailroader5619]

I too am expanding my vocabulary…along with “skoosh”, I now have a “mankey brush” on my workbench and am always on the look out for any “jiggery-faffery” in my rolling stock. Love ya, Bill!

[@minos5548]

well done royal mail , a few drops and toss into the van and its cured. All I can say is I wish my 14 xx runs that well . love your tutorials thank you

[@gregmacdonald927]

Lovely characterful models. Couldn’t get my Airfix version to get any grip however.

[@tankmicr00man]

Lovely little runner, Bill. Seems to be quieter now you've serviced it. Did it need remagnetising?

[@sleepyrider]

Really good video, thanks. Interesting there's no traction tyres on that one, wonder how that was accomplished? Strikes me that it would be a great mod for those of us with small layouts. Anyway, thanks again, great channel, keep it up!

[@markjarvis7637]

Bill said the wheels had been changed

[@mobius8002]

its the same .gears chassis etc .hornby use airfix dapol and lima old moulds and parts.if you have an old dapol terrier pug j94 or 14xx the hornby bits will fit .motors do slightly varie on 14xx but drive cogs etc are identicle.

[@stevenholden9520]

deeper flanged wheels running on finer scaled track cause a drumming noise as the flanges run on the rail chairs.

[@beeble2003]

To me, it sounded quite thumpy over track joints. Maybe that was the noise?

[@garethparkin9498]

Need to swap the wheels on mine as mine has a set of traction tyres but you can't get them anymore. Anyone know where I can get a set from? My 14xx is part of the Titfield Thunderbolt set.

[@Eddie-Earth]

Handsome GWR 4 wheel coaches!

[@nicholasbishop3300]

Nice little loco Bill Runs smoothly Nick Australia

[@anfieldroadlayoutintheloft5204]

good vid on the channel bill thanks lee

[@peternorris6438]

Any updates on the new layout

[@mikesrailwaygrestybrook]

How you doing with your new layout

[@robstrains8711]

I've owned around 20 of these, and they all have the same noise as this one, which is normal.

[@jadondinobile4403]

Hornby should make a Whole new hornby 14xx model snice they can update the model like new chassie new motor better pick up's and a more detailed body and wheel

[@peternorris6438]

If not broken don't fix it

[@shakeyhandsshedmodelrailwa2494]

IT'S A RE MOTORED AIRFIX WITHOUT ANY DOUBTS WHAT SO EVER ,,, TOO MANY SIMMILARITIES NOT TO BE , EVEN THE CHIMNET FIXINGS AND MATERIALS ARE THE SAME