Hot air gun LS-300 / Review and test.

DANIU 220V 300W DIY Electric Heat Shrink Gun Power Tool Hot Air Temperature Gun with Supporting Seat
🔵🔵🔵🔵🔵🔵🔵🔵🔵🔵🔵🔵🔵🔵🔵🔵🔵🔵🔵🔵
✈️Buy✈️
1⃣️Hot air gun goo.gl/Ez216C
🏬Digital Electronic Caliper goo.gl/IJqVF2
🏬LDNIO Power Socket goo.gl/A0nQDk
🏬GM320 IR Thermometer goo.gl/euglMd
🔵🔵🔵🔵🔵🔵🔵🔵🔵🔵🔵🔵🔵🔵🔵🔵🔵🔵🔵🔵
-Banggood---goo.gl/EF7BOF
🔵🔵🔵🔵🔵🔵🔵🔵🔵🔵🔵🔵🔵🔵🔵🔵🔵🔵🔵🔵
Specification :
Model: LS-300
Rated Voltage: 220V
Rated Frequency: 50Hz
Rated Power input: 230V
Plug Type: EU plug
Color: Black
How to use the heat tool ??!
1.Plug in the heat tool.
2.Hold the product as shown on the picture.do not touch the hot nozzle.
3.Keep 5-6cm distance between the heat tool and item.
4.Do not use more than 10 minutes continuously to prevent overheated.

[@bogdog999]

Took a lengthy amount of time to shrink that little piece of tubing. That was a long heat-soak period, not ideal. And you had to get closer than the recommended 5cm-6cm (2" or more) to do it. Still not sure if I want one of these.

[@webonada100]

Funde estaño ?

[@joshmock9717]

I just bought one and like it❤

[@christophertadeo6120]

The magnificent cheap o heat gun... I just bought it... 😀.. Turns out soldering pastes only needs 186 melting temp... 😀... It's all i need 😁... I'll just rework that nozzle in there... Viola! Serviceable cheap hot air solder.. 😀... Oh wait there's more.. I need to encase(casting) the metal tubes with plaster of paris(cheapest heat rsistant plaster out there... Coz I'm all for cheap😳) mixed with sand... 😳👍.. Basically a furnace in there... 😁... Rework finished... 😀👍. I encased the metal tube with plaster of paris... It works perfectly now!! 😁👍. Turns out Paris plaster gets stronger as it reaches 1460 c... 😳.. Just don't let it dilute on water... 😁... Why would u let your heat gun soak in water anyway... 🤔

[@Barrett50Cal_0]

Did it work? To melt the solder

[@christophertadeo6120]

@@Barrett50Cal_0 u need an improvised nozzle for that... 🙂

[@Barrett50Cal_0]

@@christophertadeo6120 thanks

[@shazcreations3229]

Don't use it over 3 minutes at one time

[@farizviandry6714]

Can it be used to remove the smartphone LCD

[@gd2860]

thats what i want it for.

[@gd2860]

lmk if you found out. i just ordered one. well see

[@carlobenevento5990]

@@gd2860 did it work?

[@gd2860]

Carlo Benevento yeah but don’t expect to use it for anything else.

[@cowneloalvaroids2387]

@@gd2860 can i remove my lcd withi this ?

[@esw6200]

flame on a lighter dos heat shrink prob better really if you can use a lighter in the area your working on then a simple gas lighter for me does the job ,and i also have a hair dryer if i can not get a flame in and a small hair dryer are not that big really and cheaper than a mini heat gun if you need something with a little more heat and blow ,a hairdryer really are perfect in some areas not all ,so you can end up with all 3 in your tool box so their is their correct choice at all times ;0

[@FSHerrante]

No puedes controlar el indice de temperatura ni tampoco conocer este dato, es poco menos que un secador de pelo en miniatura.

[@Aussiem8e]

Glad I seen this, won't buy one now.

[@graemespringer4643]

Why not??? They go for around 15 dollars on eBay. They are perfectly capable of phone repair or other repairs.

[@n.c846]

​@@graemespringer4643Do you think it will help me to clear a screen?

[@IndianDesiVlogs439]

Kitna ka hai

[@sahib829]

1300 ka AliExpress py

[@shazcreations3229]

870/