Hot Wheels Triassic Five Gasser Custom

[@brooklyndan11206]

A little touch makes the difference!! Great job my brother Paul!! 🤗👍⭐⭐⭐⭐⭐🤩🎉🍺

[@urideamabal]

So much better looking, all detailed, with new wheels and tires....

[@neilcummings9939]

those wheels are sweet. the detail work you did changed the car dramatically. awesome tips

[@martinchristian7270]

YES! Those are the wheels that should have been on in the first place. I also noticed that bad ass blue galaxy with the white top that was on the shelf. Whooweee! Sweet!

[@leongoddard7047]

Gotta love a gasser build. That really pops more with some cool detail. 👍

[@bearddoesdiecast]

I just rewatched this video. Answered a lot of questions. You should also add this video to your how-to section. Looking forward to doing this to some of my customs. Thanks for the video!

[@PacosDiecastGarage]

Those Gasser always looks so nice and with those few little touch is just super cool, the Samed wheels really put the final touch to it.

[@PerryBobKelly]

Turned out really nice! Those little details really made it pop. And thank you for those wheels!! 👍🏻

[@sabinwills7687]

Thanks for the tip about the acetone. When I open a car, I save the card and save them (I file them kinda like the old card system at the library. This will work way easier than what I have been doing. Sabin for Dementia DieCast.

[@cjromecki5086]

I loved the casting out of the blister, but you took it to a whole different level and made it look easy. Can't wait to try it

[@MapleLeafCustoms]

Paul, you're the Gasser Master. Amazing what 15 minutes and some small details will do to massively upgrade a casting! 🍁

[@iriefixdiecasts6338]

Nice tip to remove the blister pack. great detailing too. well done again!

[@joesanders3528]

That turned out great 👍

[@rickygreider4281]

2/3/24.. great job 🪅🪅🪅🪅 good work 🍺🍺🎉🪅.......🇺🇸

[@fullcustomdiecastgarage9507]

Great job on all them fine details

[@charlesdiecastgarage]

Some of the best customs are simple improvements. Nice work, Uncle Paulie!

[@jameselliott1061]

Tht 55 looks awesome I want it lol.

[@leegoldeneagle9003]

Love it looks very sweet love the samed wheels made the car you can always have a shirt car but the wheels are it brother Lee

[@samedfpilot]

I am amazed by how detailed lights are

[@fordfandiecast]

Love this updated look on this casting. Great video!!!

[@franklinlinebarger8339]

Yeah bro, cheers! Awesome video . You are my go to guy. Helped me so much to get started customizing. Your the best in advice. You without a shadow of doubt , got great skills and advice. Any tips from you are GREAT. Have a great week.Thank you for sharing.

[@BullitTonyCustoms]

Literally exactly the same thing I did with the same model👍,it's a fantastic looking mainline with just a few details,looks great fine job sir.I actually used that molotow pen to detail the window trim also.

[@MetalMania3DTV-TAS-AUS]

Absolutely magic easy build Paul, I do simular myself, that turned out sweet, cheers KC 🇦🇺🤝🇺🇸😎🙂✌👍♥️

[@jameshunt9130]

Awesome wheels do make the differences!!

[@askoseppanen3779]

Wow, veey cool! Thanks for sharing😎👍🏻

[@lj6278]

Love the narration, I know a guy that uses a brush with just one hair for detail, Crazy :) Great video.

[@joemiddendorf2076]

Great tip, & thank you for this video and details.

[@geofflukes1377]

Awesome gasser major upgrade awesome job

[@beast1624]

Paused at 1:12 to take you up on your offer. Topped off my Diet Dr. Shine here, Boss.

[@Pintony1]

this custom is awesome

[@bjscustoms]

Awesome job Paul it turned out amazing.

[@dahlstardiecast3314]

Woo, very cool. Thanks for sharing.

[@markrobinson8865]

Great job Paul and looks awesome 👍

[@stephenkaplan7915]

Thanks for the videos and tips, and thanks for sharing "sam ed wheels" I'm going to try them,also I like your videos

[@DiecastGraveyard]

Thank you Buddy

[@jasontroglin8070]

Absolutely wicked bro amazing job

[@MrJewrican]

Love it Paul! I miss my gasser from last year! Need to build another

[@maddun1969]

Great job as always Bud, I really enjoy your videos and Binge on those snowy , rainy nights !

[@DiecastGraveyard]

Thank you Brother

[@diecast_MikeEspo]

SOOOOOO KOOOOOLLLLL !!! Great work as always .

[@johnson9195]

Great detailing work. I love that casting.

[@tysonwimer9657]

I normally take a cotton ball cuz I find it's a lot easier to control the acetone and how quickly I can get it saturated..... I pretty much did the same thing with this one but I put a clear coat over it.....

[@123bigherm]

man what a sweet car i love the wheels great build uncle paulie today lesson was great through your video's i will become great ! " ps " nice skull.

[@fenixmaxwheels7406]

Nice Custom like 14 from Caracas

[@iDreamStudiosTube]

Just finished "messing" with mine a while ago! :) Go figure! Did a bit of detailing using permanent pens...not too shabby me thinks! Gonna have to get some of those great tools and accessories from you though to do some wheelswaps. Awesome job as always man! #hotwheelsgarage784 approved!

[@monti7771]

Brother Paul as always great work

[@SoMoDiecast]

Love the details Paul!

[@joeholloway1386]

Nice tutorial thanks 👍

[@HotWheeler]

Great tips, great video. 👏🏻👏🏻👏🏻

[@simplekustomsbyeddiepapand1838]

Great job uncle Paulie iam doing one as I watch the replay!! Lol

[@cutrockr-diecastracing2773]

It's popping now. Cheers.

[@johnrodriguez489]

Great work !

[@westonward735]

Very nice Paul!

[@rzminicustom1678]

awesome 👍🏻👍🏻👍🏻

[@yayasgaragecustomdiecast7198]

Very cool!

[@cyrusthevirus6383]

Looks rad dude!!

[@jasontroglin8070]

Bro I definitely enjoy your content your badass and your advice has helped me a lot thank you

[@DiecastGraveyard]

It’s my pleasure brother thank you so much

[@dieharddiecast859]

sweet!!

[@zeldadiecastracing]

Awesome work as always bro,nice

[@marcelocampos8935]

Thanks a lot for your videos. I am a old collector and did some customs in the past. Now i have to move to another country and my entire collection stay in Brazil. I want to do something like you do. If you don't mind about the screws, i really don't like self tap screw. I like the way you do using that kind of screw. what are the measurements, type and tools to make the hole and the thread? Again. Thanks a lot

[@vandalsr1959]

That whole car would have looked good with clear sprayed over it

[@DiecastGraveyard]

It would have Brother but that’s not the way the car came and I didn’t wanna alter that in that respect. But I definitely would’ve looked really good with a clear coat on it

[@3live-stream]

What’s up Paul My name is PAK and I just found your channel and enjoy it a lot. And obviously BXNGED the Subscribe button and smashed the ballz out of the like. Have a blessed day Peace

[@anthonymurphy7377]

Try a toothpick for door handles..

[@ministangs]

Hey Paul, new subscriber here. Just discovered you channel and glad I did. Very informative!

[@DiecastGraveyard]

Thank you Brother

[@neilcummings9939]

the pens are 25 here.prices between Canada and US are so different.

[@kylebaker5982]

Would like to c u try a different technique instead of selling out the base. I use a soldering gun put it directly in the middle of the rivet it will heat up the plastic enough to separate the be from the body. To put back together i use a small round file and file the home just a lil wider to put back together and if u did it right it will click back together right and not have to use any screws it will make the base look completely factory looking. I do this instead of screws to keep the base stock looking with no damage to base.

[@DiecastGraveyard]

I’m not particularly fond of that style. And I never try to make my car is look like they’re from the factory. That way there no one can ever say there any car that I sell or make for anyone is anything other than a restomod a Restoration. Just my opinion brother

[@daneself858]

🔥🔥🔥👍✌👊😎sweet

[@tonysdiecastcustoms]

Awesome build new subscriber here

[@DiecastGraveyard]

Thank you buddy

[@MrMikeyt65]

Great job I was wondering if you would be willing to do the detailing for me minus the door handles and locks. My hands are not steady at all. Just let me know. Thanks

[@DiecastGraveyard]

I sure would Brother

[@DiecastGraveyard]

Email me at [e-mail]

[@rickczopek5503]

The stand your using, is that bought or you made it? Problem watching you make it look to easy. Un real when finished.

[@Pintony1]

envelope on way.

[@Pintony1]

lmk if those work for you.

[@moonman19]

could you share the sam s wheels page?

[@DiecastGraveyard]

samedwheels.com

[@Feyker-uc6zt]

Hey uncle Pauli, i started to collect Hot wheels about 3-4 month ago and i just now wanted to start to customize some cause it look so nice when you do it ;) Already watched your vids to begin but still wanted to ask for some more paint recommendations cause i cant find them in Germany. Much love from Germany man great vids

[@DiecastGraveyard]

Createx paint can be shipped from SPRAYGUNNER.com

[@Feyker-uc6zt]

@@DiecastGraveyard thx for the fast reply gonna try to search for another german site cause the shipping starts at 25$ and goes up to 160$ hahhaa

[@Feyker-uc6zt]

@@DiecastGraveyard sry to ask again but what kind of createx paint is best for the job? there are just so manny😅

[@DiecastGraveyard]

The Wicked line. Give me an idea for colors you’re looking for.

[@Feyker-uc6zt]

@@DiecastGraveyard just basic colors to start i can probably mix them cant i?