Nice!Guys seem to get different height results,hard to know what to get.I’m thinking of going with the 1.5” drop.Thanks for this!
@johnengland86197 ай бұрын
Looks great thanks for sharing
@r1g2v3 Жыл бұрын
great video, im thinking of doing the same with the rear on my 67'. can you share the rim details w/ offset spec's. thanks a bunch !!
@wesley_scott Жыл бұрын
Front 17x8 4 1/2in backspacing with 245/45r17 Rear 17x9 5in backspacing with 275/40r17 They are YearOne 17in aluminum rally 2s. So they have a nice stock look and fill in the wheel well. I researched this for months before I came to the above specs. And it’s a great fit, no rubbing, and the top of the tires are about flush with the wheel well, but no chance of of touching the metal. My personal opinion is 18s and larger look odd on the smaller muscle cars like Mustangs and Camaro/Firebirds so that’s why I went with the 17s
@franciscoc25248 ай бұрын
Do you have the wheel specs? Just looking for the offset if there is any. Didn’t catch u mention it in the vid
@wesley_scott8 ай бұрын
Look through the other comments.
@johnnyhotrod Жыл бұрын
Meant to ask,how is the ride quality?
@wesley_scott Жыл бұрын
I’d say stiff but not ridiculous. I’m running 17s with lower profile tires which will stiffen the ride also. I don’t think a longer trip would wear me out but have not tried any big miles in it yet. The other springs had just a high ride it’s actually messed up my drive shaft length as I can not slide it forward after unbolting at the dif. Obviously it having a turbo 400 from a 1979 Oldmobile 98, it may have had the wrong driveshaft length all along. So have not drove it much as it has a wild vibration at 60 do to bad ujoints and no slip into and out of the tail shaft.
@johnnyhotrod Жыл бұрын
@@wesley_scott Wow,never thought about the drive shaft issue.I’m putting in a whole new drivetrain so I’ll have to order a new driveshaft when it comes time.Torn between splurging on a Speedtech torque arm setup and just dropping the leafs.The torque arm has a good amount of adjustability. Never ending decisions and $$$$
@wesley_scott Жыл бұрын
@@johnnyhotrod well measure the driveshaft first as yours may be alright. Mine might have been like that when I got it but the front end was so badly worn out and with a bad wheel bearing it was a danger to drive. So I did the rear suspension and swapped in tubular control arms with adjustable coil overs on the front before I ever drove the car. I bought the car in a 24ft enclosed car trailer as a package, it was essentially disassembled from a restoration that never got past body work and paint. But had the engine and transmission and differential in the car so it could be slowly moved around , with majority of the parts in boxes and totes in the trailer. No interior no glass etc etc, fun project, but man I’ve spent some money.
@Frankthebank7618 ай бұрын
Did you ever get the front done?
@wesley_scott8 ай бұрын
Yeah; installed tubular control arms and adjustable coil overs, great stance and a really nice stiff ride but not ridiculous, also installed a quick ratio Trans Am steering box. Sorry did not make a video of it for some reason, can’t remember why to be honest. Unfortunately the motor is just slap worn out with no oil pressure at idle, and only a few psi at cruise and with the 3 speed auto and an open 2.56 rear end just super boring to drive. So I just use my 66 Buick Electra coupe to cruise while saving up money for a LS and 6 speed manual swap. Already have the 3.73 Yukon Locker to go in BOP rear end that I’ll do this summer.
@Frankthebank7618 ай бұрын
@@wesley_scott nice. I’d like to see that stance. Looking to do this on a 67.
@wesley_scott8 ай бұрын
@@Frankthebank761if you go to my channel and look for 1968 Pontiac Firebird Stance, you can have a great idea what it looks like, short video, just uploaded for you.
@Frankthebank7618 ай бұрын
@@wesley_scott thanks, looks good man. That is the perfect height