Broke Down In the Middle of Nowhere | PJ Trailer Issue | This is Hotshot Trucking!

[@OUTLAWBBQ]

Good vid man. I'm not trippen on quality of video. I mess with for your quality of content. I'm waiting on my gooseneck through hotshot107. No one else has any that I need for non-cdl. Should be on the road in3 to 4 weeks hopefully. Appreciate ya man.

[@HotshotMacc]

I appreciate that love brother. Glad to hear you found a solution to get you on the road sooner rather than later. It’s getting more and more harder to find these trailers these days.

[@OUTLAWBBQ]

You bet! I've been following your channel for a minute now and have learned a lot from you. Should be on the road hopefully in 3 weeks. Keep the quality coming bro!

[@reyrey8210]

+

[@jasonscales2522]

I'll take a $412.00 & a day loss any day! Anytime it's not a catastrophic breakdown is a victory in my book. Stay safe

[@HotshotMacc]

I know that right! Appreciate that brotha! 💪🏽💯

[@jrvapor]

Word, you just gotta keep it movin!!!

[@josuagaro6362]

Macc I like the way you managed the situation, you didn’t panic or get all crazy about it, sometimes it’s better let the professionals do what they do and pay a few $100 than try to do it ourselves and get hurt or mess it up even worse, glad you got it solved safely keep grinding my man.

[@HotshotMacc]

Thanks brotha! I try my best to keep cool, overtime I’ve learned that getting all worked up and being pissed off about a situation thats out of my control just doesn’t make sense. I think I made the right decision as well 💪🏽💯

[@01AudioVideo01]

Good idea to shout out that parts shop.

[@evanoliver44]

Happy to see u repair it and go on the road

[@danielg1642]

Gotta get them torsion axles bro. Glad to see u back on the road

[@vakistagoodman4917]

Mannnnnn you had my anxiety up !! lol....but salute to keeping it cool!

[@All-Miles-Matter]

Like I've been saying... Those 7k axles aren't up to what we do! The leaf packs just can't handle it over time. They are homeowner axles or local contractors moving equipment from jobsite to jobsite.. Unfortunately, it's just the beginning. And don't listen to these guys that are telling ya to get torsion axels. If you screw up a torsion axle, you gotta cut the whole thing out and replace it as opposed to just replacing a couple parts. You want 8k axles and 17.5-16 ply tires. The HD axle starts at 8k.. All you can do in the interim is get 14 ply tires and baby those equalizers. Don't twist that trailer with weight on it. Stock up on all trailer parts so you can service your trailer when you are home....YOU WILL CATCH ALL THESE PROBLEMS BEFORE HAND...The bushings wear out first, then it takes out everything else. Everytime you go home, you gotta rip those hubs apart and check everything out... especially 7k axles. Just sharing my experience and what it takes to stay off the side of the road. Also, you need to look up inside the equalizers and make sure the welds didn't break inside the equalizer and leaf spring hangers. I missed this my first time and broke more stuff...CHECK THOSE WELDS BROTHER! INSIDE ALL THE HANGERS!! They put one tac weld on the friction plate for the slipper spring. Again, just giving you a heads up. If anybody defends the 7k axle setup, they must have 7k axle setup.

[@bryonsusedautos]

The axles where fine it was the cheap made spring pack pj uses! There isnt a problem with 7k axles lol.

[@JackDBIack]

17:50 Well I'm now trailer or axle specialist but that looks like a bent axel right there.

[@All-Miles-Matter]

It's not bent actually. The 7k axle is cambered. It comes bent like that...when you add weight, the axle is supposed to level out. When you go up to a 8k axle, ya get a straight axle... not cambered. HD axles actually start at 8k...thats when the straight axle begins.

[@geoffdowney9295]

Welcome to Wisconsin! Glad the fix was quick. Thanks for the vids. Very informative.

[@HotshotMacc]

Appreciate the love and support!

[@hotshotnewengland]

Good job on doing what you felt was right ✅. Being a hotshot and trucker is not always about fixing the truck and trailer yourself, you solved the issue your way and you back on the road and that's what is important. Many truckers try to bully people who don't work on their own setup and it's bs to have to that mentality. Keep it up and good luck with everything bro 👊💪🇺🇸💰

[@multi-transportationsystem11]

Well said homie but we still have to bust his balls for not wanting to get wet jk great video just subscribe

[@HotshotMacc]

I appreciate that brotha! Man I could not have said that any better bro. I don’t know why so many ppl are getting at me for not fixing the issue myself. Can I get a chance to learn and see how to do it 🤣 but yeah bro I work on other things as well so it’s not like I’m just laying around not doing anything while I was down. I just decided it made more sense to not work on the trailer bc I had an expert within walking distance. Crazy bro but appreciate you as always brother 💪🏽💯💯

[@HotshotMacc]

🤣🤣🤣

[@sjw811]

Good way to keep your wits about you in a moment of confusion and chaos. Keep rolling bro , we got your back 😎

[@HotshotMacc]

Appreciate that brother! Definitely try my best to keep my head up in bad situations. Thanks for the support 💪🏽💯

[@brandondurbin8322]

You was in Charleston West Virginia at the 64 East and 77 North split that's about 2 hours from where I live in Ohio

[@chickmagnet225713]

Second lets go Tim..Getting my own Authority because of you bro. Look out for Oil Man Trucking...Houston Texas

[@HotshotMacc]

Aye that’s what’s up bro! Ill be on the lookout!

[@jamesnelson5700]

Great video and great attitude homie

[@HotshotMacc]

Thanks brotha 💯

[@elmo_eman2867]

I really appreciate this guys videos.

[@HotshotMacc]

Thanks for watching!

[@markcrawford6501]

Great work my brother

[@Juan-tj1bf]

Swear I just broke down by west virginia trailer distribution store on I sixty four. This road is cursed. LOL.😂 I remember watching this video you mentioned something about breaking down in west Virginia came back to it to watch It. Looked up the store I was five minutes away. Only problem was they didn't have my axle. Axle broken so I just secured it and drove on one axle.

[@shermanjack7251]

Have you contact PJ for the cost warranty

[@HotshotMacc]

This issue was out of warranty. Im not complaining bc it wasn’t that much.

[@kasey1love]

I agree with Interstate life, great video quality. What are you recording with? Also the info is priceless. Thank you for sharing.

[@HotshotMacc]

Thanks for watching ! I use Sony 6400 to record

[@kasey1love]

@@HotshotMacc Thank you.

[@jandblawncare8570]

At least you found parts! We do a bunch of camping, or "glamping" in our 5th wheel and Ive seen people get stranded for days because they cant find parts. The leaf pack isn't too bad on price so might be a good idea to grab an extra pair so you have it. One more note...ditch the standard trailer suspension and get a More Ride or Lippert Road Armor suspension, they come with grease-able bolts and brass inserts for the leaf springs plus they're supposed to improve the ride quality by a bunch. Those plastic bushing are junk and need replaced all the time! Those kits are only around 500 buck for the whole set.

[@armandomartinez8798]

Thanks God you're safe and can find a solution to your problem. be safety

[@JCKDTV]

That’s how we do!! Keep pushing! Rethink and rebuild! 💰💰💰💰

[@HotshotMacc]

Yessir 💯💪🏽

[@takwaunbest196]

@@HotshotMacc what are some good companies to lease on to? I’m thinking about getting started just want to be pointed in the right direction

[@walkerinmotionllc8618]

Nothing but net baby!!! You Got It ✊🏾

[@Spidercarfix]

Following you bro from Haiti, be strong! Thanks for inspiring me!!

[@HotshotMacc]

Ayeee Sak Pase! Appreciate the love and support bro!

[@lesmuelle4479]

Dang that totally sucks on the axle and tire issue.

[@austinfields6479]

What a positive inspiration you are in such a difficult situation.

[@HotshotMacc]

I always try my best to be! I appreciate it!

[@heybob680]

Leaf springs,,,,,and both u-bolts on both sides can be,,,,,welded,,,to prevent this to happen.

[@duarmunoz6728]

Hey man had the same problem with my trailer this week. Mine happem in the state line of Washington and idaho. This old guy real nice gave it a check and told me it came from manufacturing like that. I guess for the high demand they are just doing them asap and not paying attention.

[@HotshotMacc]

Sorry to hear bro but you could be right man. They are pushing these things out bc the demand is so high right now. Stay safe!

[@Carpentry344]

Wow. I'm hope I can meet you one day on the road. I'm from Cali and in about 2 months I'll be on the road as newbie. I will use all the tools you have sheared with us thank you man. I'm looking for a mentor and you are the perfect person. Even we leave in a different state but business is the same. Stay safe on the road this winter.

[@solodvr]

Great video. Subscribed.

[@HotshotMacc]

Thanks for the sub!

[@thanniss]

My leafspring bolt fell out. Luckily the people I was trying to get a load from helped me lift the trailer up to get a replacement in till I called a on call mechanic. Still going strong on replacement grade 8 bolt. Guy did a really good job in Kansas city area.

[@DaydreamAboutNiceThings]

You did it my way. Stay dry and hire the professionals ! Lol stay safe and roll on !

[@HotshotMacc]

Haha definitely!

[@Duckbutter93]

My 3 week old big tex ubolts were loose from the factory, had to crank them all down a good amount

[@briantorres1612]

I think the torque on those bolts is only 75 ft lbs

[@HotshotMacc]

That’s crazy!

[@almenares34]

Great Job my brother. Solo Hotshot and logistics Llc Fort Worth Texas

[@Honda6905]

Next time that happens you can strap the axle back and another strap pulling forward to where it’s back center. And drive wherever you need to. I did 600 miles that way with about 6000lbs and it was fine.

[@jeremys-i7o]

Good suggestion...and as light as the load was he could pull the wheels off the shifted axle and get to a safer spot

[@1red_nextview740]

They say you could have done it yourself, how would you get the trailer off the ground?

[@williamdebow3478]

Good thing about dual axles. All he had to do was put something under the front set of tires and drive up on it. The back tires would come right up off of the ground. It's the best way to change a flat tire if you are in the middle of nowhere without having to use a jack.

[@twill1537]

Keep pushing...great way to say positive

[@wheyez1]

Broken center bolt. Pull the axle back to square with a comalong to get you square on the road. You need a diesel mechanic friend.

[@joser.8166]

Jibaritooo! I'm very Glad that you make the right decision on that . bro. Gracias A Dios 🙏 everything went well and Nothing wrong happened on that Road.

[@HotshotMacc]

Most definitely broo!!

[@bartman8876]

Awesome kept your cool 😎. And yea sometimes it's just worth it to have the pros do it. Peace of mind and you chill and relax.

[@HotshotMacc]

Most definitely bro! Appreciate that man!

[@bobbywilson5730]

Nothing wrong with quality....very good job sir...

[@HotshotMacc]

Man thank you brotha! 🙏🏽💯

[@Largecar2165]

torsion bar suspension and airbags but its easier to buy cheap trailers

[@HotshotMacc]

Absolutely

[@housseinal-eidan482]

Happened to me too 3 months ago on brand new Texas Pride trailer. Leaf spring went out.

[@mrmotofy]

One thought I had was always carry a 30T Bottle jack

[@chrisdupre5362]

Hey bro i'll take a break down all day over having my truck broke into! Glad to see the damage wasn't significant.

[@HotshotMacc]

Facts brotha! Appreciate the support man!

[@bigbooger1000]

Glad it all worked out man. Let the pros do their thing. Good video

[@HotshotMacc]

Yes. Time is precious and not worth the headache... After a stressful day I wasn't about to put the mechanics hat as well. Thanks for the support Pepperbelly!

[@jameswhite5737]

Grandma was just yank that leaf spring around for real.

[@hypermotiontransportsllc.6595]

You made it look easy my guy…💯Good sh*t…

[@HotshotMacc]

Appreciate that brotha! 💪🏽💯

[@kelvintorrence5994]

I thought I seen you on this Wednesday going westbound on I 80,andcnow you said you where on 1 79 in my neck of the woods.stay safe and keep grinding man

[@kelvintorrence5994]

Oh you said I 77 south ok my mistake

[@HotshotMacc]

Yeah bro I’m all over but was definitely on the 77 when this happened lol

[@lithoniadirtybirds9884]

You know man what I learned from the military is to do pmcs daily before during and after with heavy equipment especially the ones you use daily or often ,even if it’s the basic sweep around your vehicle.Just try to take a little time out each day if you can and give it quick view check for leaks ,see if you need lubes ,see if something bent or loose,operator level type stuff 💯💯stay safe

[@SelfMadeSilu]

Man this is crazy

[@HotshotMacc]

It was bro lol

[@denp54z]

$412 !!!! Man o man you got off lucky, most mechanics would have charged you double ! How was another tire ?? That tire that got damaged was fairly new too, wasn't it ?

[@HotshotMacc]

It was definitely a blessing to only pay that price but only 1 tire was damaged and yeah it was fairly new unfortunately

[@allanarango1047]

Good video brotha appreciate everything

[@HotshotMacc]

Thank you 🙏🏽 💪🏽💯

[@keithqueen3554]

I love WV roads on my bike not always pulling the trailer to some of the well sites.🤗

[@Dipperdap1]

First time watching your channel and subscribed. Great attitude and good to see you put safety first.

[@HotshotMacc]

Welcome to the channel bro and thank you for the support! Having a bad attitude doesn’t get anyone anywhere so I try my best 🙏🏽💪🏽💯

[@VictorGomez-sw5pc]

Bro $400 is not bad there are some people out there that really like to stick it to people just because they are from out of town. Keep on Truking

[@HotshotMacc]

Im with you bro! I’m happy with the decision I made. Thanks brotha!

[@Crazy-Horse-Tx.]

Heck yeah. Louisiana shop stuck me good when they saw those Texas plates .

[@jamesnelson5700]

Getting parts and repairs is considered on duty time bro

[@HotshotMacc]

You might right lol

[@ddaddybass]

WV, wild and wonderful. Was this after you picked up at Scott Depot?

[@HotshotMacc]

WV is awesome. But no , Scott Depot was months ago. I was coming from Virginia when this happened.

[@loganlupardus4223]

You're in my neighborhood!

[@clemgar]

whats up macc great blogs getting ready to start my non-cdl rig on todays market is it better to go non-cdl or cdl

[@HotshotMacc]

What up bro, I say CDL bro just to have more options

[@efxvlogs]

I seen your truck last friday at the Nationwide dealer. I just signed for a dump trailer and I get videos of just how people dont like PJ trailers. 😞

[@HotshotMacc]

Thats dope bro!! Every brand will have a negative side to what ppl say. I look at the majority. To me, PJ is a well built trailer. There’s flaws in everything a human touches.

[@Jam3s27]

That’s a blessing that’s all it was god forbid it kicked the trailer into another lane not knowing it was messed up I’d say that’s a win 412$ both side and safe and back on the toad

[@TaylorMadejdm1975]

Daing..! Hopefully you got a warranty with the trailer...?👍

[@HotshotMacc]

I hope so too! Lol

[@bossbeezley3249]

Good vid! Definitely glad it all worked out bro. I would have drop the money as well especially in this situation. Be safe out there my guy...

[@black007die]

I'm first 🤙🏾

[@evanoliver44]

Why u not push back by using the jack?

[@HotshotMacc]

It wouldn't fix the problem

[@rogersheppardjr5840]

Bruh, I had a bearing to go out while carrying a load, and it ate the spindle up on my axle. I had to drop $2260 on site for a new axle. I purchased a used trailer. So, may I add that it happened on my very first legit load.

[@HotshotMacc]

Damn bro thats crazy sorry to hear that man but on a used trailer you definitely gotta be sure of how it was maintained. Sucks it happened in your first load tho

[@rogersheppardjr5840]

@@HotshotMacc All is well. It was definitely a learning experience. I'm rolling strong now. #AllGasNoBrakes I jumped off the porch under my own authorities, and just wanted to cut out all of the middle men. So, I decided to pay cash for everything truck and trailer. It was a huge risk... #ButGod He is always faithful! Bruh, I see what you're doing, and I'm loving how God is blessing and keeping you! You are an inspiration to me! Stay safe out here bruh! And continue to be blessed, productive, and prosperous! #Salute

[@corkyhoffstetter4389]

Great video

[@bryonsusedautos]

Could u show how you have your phone,gps and eld mounted also where did you mount your fire extinguisher?

[@HotshotMacc]

Yeah I can show that in one of my future videos

[@jameswhite5737]

This is painful from one hotshot driver to another, you only have 5k on it. Take the tires off the bad axel grab a couple of chains and and winch the axel up. 🤲🏿

[@DavidMNewbold]

For a quick resolution and only $400 in cost, seems to me you did the right thing to get back on the road.

[@HotshotMacc]

Right!! Thanks you!

[@wheyez1]

The guy on the forklift should be way forward. If you put the load on the front of the forks it can’t handle the same weight. Here’s what I have learned, shit happen. On your list of things get some coveralls and some welding gloves.

[@HotshotMacc]

Thanks for the advice!

[@kfelix2934]

@5:45 just to let you know, that hitch lock can be defeated in 5mins or less with a bar, and 10lb hammer. PJ trailer are okay but I would never use one for hotshot.

[@HotshotMacc]

True, but better to have it rather than nothing. The difference between someone in public breaking it off rather than just dropping it on the truck still makes sense for me

[@CJ-214]

I would’ve paid the $400 too!

[@HotshotMacc]

💪🏽💯

[@squirrelatwork]

What do you think of that gooseneck lock? I purchased mine at PJ. It seems like its a piece of shit and gimmicky. Do you have any recommendations for a better solution

[@HotshotMacc]

Yeah that lock isn’t the best in my opinion but it just adds a bit of work for someone to get to it. I don’t think any lock is theft proof completely but I believe this one is most definitely more durable Gooseneck Round Tube Coupler/Hitch Trailer Lock with Trimax Puck Lock - Bolt Cutter Proof!!! a.co/d/erImYZF

[@grimreaper4015]

Best you let them do it, seriously w a heavy load like that, good decision, now at home ok.

[@HotshotMacc]

Definitely man! I was able to take care of other things that needed to be done! Appreciate the support!

[@savedbygrace246]

any iidea what companies i can contac for a owner operator for lease in houston tx . i wanna get into hot shot non cdl to start off

[@JCKDTV]

Next time you come thru MD holler at me bro

[@BigWoodyJohnson]

Did that load come from Florida?

[@HotshotMacc]

No it came from Virginia

[@3dB123]

Did the trailer not have any type of warranty

[@HotshotMacc]

Not for the type of damage and timing

[@EDOutdoors91]

I have a Ram 2500 about to get a 40ft 14k trailer, thats the only one the seller has available right now. My concern is how much weight I can haul with it. How much weight are you able to put on your trailer to keep in non cld ?

[@irmagarcia8266]

I believe you need a 3500?! I got rid of my 250 Ford for that reason, don’t risk it! I now have a 350 dually.

[@HotshotMacc]

It just depends on what your equipment is rated for. If your doing non cdl then you’ve got the right set up. Subtract your scale weight from 26001lbs and that will let you know what you can put on the trailer. But also keep in mind the drive and trailer axle ratings. As well as your gcwr. I’m actually dropping a video today talking exactly about this.

[@jameswade833]

Question, can I hotshot trucking with a 2011 Nissan titan PRO 4x ?

[@thatguybsimp3326]

@Hotshotmacc. The exact same thing happened to me today

[@HotshotMacc]

Damn sorry to hear bro! Stay safe

[@jimmydagent8187]

How much $ should I ask for on a loan to start a non cdl hotshot business?

[@Candlestick_Wick]

Sometimes you have to leave things to the professionals.

[@HotshotMacc]

Most definitely! 💯

[@JoeG-ef9gv]

I would like to know, what type of Driver license do you have to pull that trailer?

[@HotshotMacc]

Just a class C

[@JoeG-ef9gv]

You pass tru a scales or you have to stop on scales ???

[@dansdiesel767]

There's a saying I tell people alot don't do shit you don't know and you won't have problems you can't fix let licensed mechanics do the work remember if something happens they are liable not you and that's a great spot to be in if something fails

[@HotshotMacc]

EXACTLY!! I’m with you on that my man. I’m sure ill learn more overtime but at this point, ill let the professionals handle it lol

[@danlarkin460]

Not a good idea cuz take your time and do it right

[@raynone2754]

Nothing wrong with letting someone Else doing it you could have gotten hurt or take you for ever in the bad weather Share the love

[@HotshotMacc]

Man that’s so true! Appreciate it brotha!

[@danbrmdz]

That was your u-bolts being loose and a combination of not doing your pre-trip.

[@HotshotMacc]

I do my pre-trip every morning. I didn’t know I had to get under my trailer every morning with a wrench to make sure the bolts are tightened.

[@danbrmdz]

@@HotshotMacc part of your pre-trip is checking your suspension on your trailer the u-bolts are part of the suspension and need to be checked to ensure they are not loose, leaf springs are also part of the pre-trip and are to be checked for missing or cracked parts. So yes, you should be getting under your trailer and checking suspension components.

[@HotshotMacc]

@@danbrmdz thanks for your feedback sir.

[@danbrmdz]

@@HotshotMacc either way I really enjoy your videos and good luck, I really hope you are extremely successful in your business. God bless you on the road and stay safe.

[@icegoldbullieskennel3095]

Aye bro chalk it all up to education. Can't put a price on that.

[@luismedina2394]

I wanna say this happens when you back up n put too stress and flex the axle too much

[@HotshotMacc]

Bro that’s the same thing I was thinking. Imma cut that out lol

[@curtisbrown9743]

Greetings I've been following you. You give great information to help newbies...lol I do have a question...I know u have a 2500 Ram but is it gas or diesel? Regular or 4or? Lastly what would be the min year for a truck? I'm seriously thinking about hotshot

[@HotshotMacc]

Hey thanks for following! My truck is diesel and its 4x4. If you are leasing on to company to start then you will have to see what their requirements are for how old the truck can be. If you are running under your own authority you can make that decision on your own and age doesn’t matter. Just more of a risk being over the road without warranty and more possible breakdowns depending on maintenance and how old the truck is. Just my opinion.

[@hotshot3d]

Lol… all these are the wrong questions .

[@curtisbrown9743]

@@hotshot3d Hey Sam why u say that?

[@gilbertsanchez3886]

What size trailer is that ?

[@HotshotMacc]

This trailer was 32ft

[@jaylomeli7808]

Things happen bro! Better that happen then a a axle falling off and causing more damage...be safe

[@HotshotMacc]

Definitely bro! I was very thankful!

[@williamrobinson6680]

Not bad. Caught a good break. Wish they were all like that. Try one whole week and $2464. Or 8 days and $2570. That's why they have us doing it. The hidden secret is this is by design. Its not about providing good employment opportunity, but actually about keeping the freight moving. Period.

[@HotshotMacc]

Man I bet, I got lucky with this one!

[@americaninfidel9001]

Grease the bushing

[@garrieparsons2265]

Can you confirm who your leased on to for your fans bro ????? Everyone want to know … ??? Keep up videos 👍

[@HotshotMacc]

Hotshot107.com thanks bro!

[@dreedwards1745]

Macc, what size of truck are you using?

[@HotshotMacc]

3/4 ton Ram

[@1Transporter]

This trailer company seems poorly operated. I hope they reimbursed you and gave you 2 new tire's. They'd made it right or I'd take them to court, that could of caused a severe accident with fatalities.