SIMPLE STEP BY STEP ON HOW TO PROPERLY INSTALL A TIRE ON A RIM WITH NO MACHINE USED - OLD SCHOOL WAY FROM THE DAY -
Пікірлер: 337
@Dubov19337 жыл бұрын
Your right, why take it to a tire shop when I can just scratch the shit out of it at home
@EnergeeZz7 жыл бұрын
Lol
@roberthusk34027 жыл бұрын
I thaught same thing .
@superXwhiteXninja7 жыл бұрын
Josue Lopez if you put the rim down on a tarp or something that would easily solve that problem.
@jeffmullinix79167 жыл бұрын
Still a lot better that you do it than the tire shop scratching the hell out of your own rims . LOL
@efwefweffrwfef91456 жыл бұрын
its for weight reduction
@taulavaulol10 жыл бұрын
how to scrape the rim on the concrete..
@nachomansandyravage234610 жыл бұрын
Exactly what I thought!
@marineninga9 жыл бұрын
You can do it on the grass
@ROFLance8 жыл бұрын
taulavaulol I cringed at 1:27
@AndyWJP6 жыл бұрын
Yeah, cringe worthy isn't it. He could have at least placed the rim on a piece of cardboard.
@jdb62154 жыл бұрын
My thoughts exactly lmao
@CoelhoSports7 жыл бұрын
i just learned something new: scratching chrome rims on concrete is worse than fingernails on a chalk board.
@clay24313 жыл бұрын
I watched this whole video then realized it’s 8 years old. It was entertaining. Mikes auto. Doin it freestyle. Keeping that rust at bay and scratchin rims.
@schnauzerears91211 ай бұрын
Inviting more rust with the scratches lol
@dbennettkc9 жыл бұрын
Cardboard is probably a good idea. Also, what the camera man referred to as a breaker bar is actually a crowbar or pry bar. A breaker bar takes a socket and is used to loosen nuts. You can also use a spray on soap or lubricant instead of the grease.
@jnunez12033 жыл бұрын
👍😅😂
@norbertruiz51102 жыл бұрын
🤣🤣
@DidIcatchaninerinthere Жыл бұрын
Why not make your own video?!?!
@xxXthekevXxx7 жыл бұрын
I like how serious/professional this guy is even when the other two guys are joking around haha
@kurtalder16225 жыл бұрын
this video got a lot of hate, lol. Must be the city boys. Thanks for sharing how to put tires on my old beater and save a few hundred dollars!
@antcri7304 жыл бұрын
Where does it cost a few hundred dollars! to have a tire mounted???
@seco6633 жыл бұрын
@@antcri730 California
@ENTRIDIANT8 жыл бұрын
DISCLAIMER: Does not work with Blue Handled Breaker Bar
@prestonjames67767 жыл бұрын
that's hilarious
@xSLWRTHNUx6 жыл бұрын
I'm loving the smart ass remarks by the camera guy. "You gotta use sandals or you can use any shoes?" hahaha
@chickenby9 жыл бұрын
These are the kinds of videos that made KZbin what it is today, I love it! Thank you fr the info!
@STENOOOOO998 жыл бұрын
I liked it because of the entertainment factor.. definitely not ever doing it this way.
@mrbreezeet18 жыл бұрын
+STENOOOOO99 I've done a few like that, late at night, needed car next AM Or No Money, usually No money. LOL
@Conical1879 жыл бұрын
i was cringing the whole time he was spinning that rim on the concrete
@furiouswolf777voodoo42 жыл бұрын
Dang it I wanted to see him air it up! That would've been BLAST 🤣
@brettwilloughby1288 жыл бұрын
I like how you drag the finished edge of your Cragar SS on the concrete. Good job!
@TechnoDelta10 жыл бұрын
i think id put carpet down. that looks and sounds hard on the rims.
@warrynmoore20479 жыл бұрын
I'm a fast fit mechanic in the UK and the fitting costs come free with the purchase of every tyre. Also, our main rule is to never damage the rim, including scratches
@x91iNFINITi4 жыл бұрын
You never know when you might need to use these tricks. Good video.
@232Stangpwr10 жыл бұрын
Scraaaaaaape! Lol cringed every time.
@AZestyNewt10 жыл бұрын
Amen. Cringed for sure.
@jnunez12033 жыл бұрын
😂
@joshjhudson8 жыл бұрын
looks like a good way to fuck your rims up and maybe puncture your tire.
@gottalivfree8 жыл бұрын
+Josh Hudson I use a rounded end tire bar so there's no chance of puncturing or tearing the tire. Don't try this with a large screw driver. You'd have to have some really cheap rims to screw them up with a quality tire bar. Your tire bar should only touch the inside of the rim.
@nothingwrongwiththisname23138 жыл бұрын
+Josh Hudson or you could just do as he did..
@mrbreezeet18 жыл бұрын
+Josh Hudson mounted pleanty by hand, my Motorcycle tires too, never hurt one.
@AngeIsJourneys10 жыл бұрын
Thank you, as a woman I found this easy and no nonsense. Even a little humorous.
@AngeIsJourneys10 жыл бұрын
Oh and you and mike should do an oil change on a Chev HHR and brakes and change a windshield :D just askin
@sturgeonhunter23218 жыл бұрын
there ya go spin that rim on the concrete scratch it up yeaaaaaa, you go boyyyy
@mrbreezeet18 жыл бұрын
+sturgeon hunter He was driving a Primer Bomb "Rat" and installing a used tire, he wasn't worried about it LOL..........................................To the Original poster............................ Just kidding Yeah, could just lay the rim on a piece of plywood or cardboard.
@datpurp24078 жыл бұрын
how to fuck up the lips on your wheels
@droddy2hottie7 жыл бұрын
I think my favorite part was when they called it a breaker bar. Then again, those were some pretty pro level scrapes so who knows, maybe the rest of the world has been wrong all this time.
@cgiuffre3 жыл бұрын
This could work when you are off road and have no spare. Appreciate the effort.
@Elvin_reels10 жыл бұрын
a prybar to be exact but a breaker is one of the greatest tools made. and thanks for the video!
@brokenstereo31226 жыл бұрын
This is great. I'm trying to convince my husband to do this as directed by your video just for 100% entertainment on my part.
@mark521110 жыл бұрын
Entertaining Video!
@DDrake-rc5oe5 жыл бұрын
Excellent video gentlemen
@BEAR-7 жыл бұрын
great job, guys! takes me longer with a machine due to all of the redo's I encounter. I might try this next time.
@sirhorsechoker10 жыл бұрын
Wow. The people really felt the pain of that old rim getting scratched a little bit. And people say the world has no sympathy.
@roberthusk34027 жыл бұрын
Pretty cool though. I diddnt know it was possible. Thumbs up
@mancavemoto11 жыл бұрын
love the way he just scrapes the rim around on the concrete.....nor to worried about the finish on the outdie lip!
@charlesallen90453 жыл бұрын
Dude. Nice.
@markanthony58973 жыл бұрын
I stopped watching it as soon as I saw him scratching the rim by dragging it on the concrete. Genius
@dewaynemetcalfe69079 жыл бұрын
Man yall need to have a show. Funny as hell !!!!!!!!
@gmanbuffny12 жыл бұрын
Yes i would not recommend it on new rims, especially paint ones, but it just shows you that u can install a tire on a rim - especially used ones. Sometimes a beer helps to get it started.
@thmnuri10 жыл бұрын
ok fellas heres a tip for you dont put grease on the tire it will not rot out but if your tire ever actually needs to hook up the chance of you spinning the wheel in the tire is very high. but other than that not a bad method. this will not work wlth low profile tires but for anything with a sidewall bigger that 60 you would have no trouble. use soapy water to lube your tires the water evaporates and the soap helps the tire stick to the rim unlike grease that will still be slippery in 10 years.
@real.hatsune.miku.3910 жыл бұрын
I guess they forgot to mention, but I'm just saying, you can always clean off the grease from the tire and rim after you put the tire on the rim. I guess the grease is there just for lubing. I don't think you need to leave it on. Just saying.
@loneminer241810 жыл бұрын
John Titor So do you use soap to remove the grease and have a chance of missing a smear (Which will happen) and spinning the rim? Just use soap in the first place like every tire shop.
@michaelpeterson33542 жыл бұрын
Top Safety Tip: Make sure to have a beer handy and wear sandals!
@dgushardy110 жыл бұрын
You guys ROCK
@nachomansandyravage234610 жыл бұрын
Bout to do this tomorrow. Luckily I'm fat so that'll make it easy.
@ijsbtwfwiwymmv10 жыл бұрын
And when you are done you still need to take them down to the tire shop to get them hi-speed balanced which comes free with paid mounting. Otherwise, it's $16.00 per wheel & tire set. Net savings = $0.00
@ets3316610 жыл бұрын
since when is grease used to install tires .. what we use is something that looks like grease called tire paste but actually dries and locks the tire bead to the rim to ensure it doesnt spin on the rim . and i love the cloves with the sandals also when doing this u use a tire bar not a pry bar
@kauxzey64732 жыл бұрын
I APPRECIATE THIS VIDEO VERY MUCH
@PackardBelltoll5 жыл бұрын
gOOD jOB RALPH
@SP330Y9 жыл бұрын
now try it on a low profile, a different story altogether, large side walls easy. What was the tyre size you fitted apart from the 15 inch?
@dptretender677 жыл бұрын
starts here 3:05
@cytoproct62506 жыл бұрын
Great thanks
@swflmotorsportsfan66672 жыл бұрын
a rim, a tire, a pry bar, a pair of flip flops, and 10 toes In many foreign countries, they mount tires bare footed 😀
@katmagicate10 жыл бұрын
Eeek! The scraping of that wheel on the concrete makes me want to scream... lol
@tmon3ydadjmbr7 жыл бұрын
Oh damn 😲
@daniequezada67 жыл бұрын
I have a breaker bar with a red handle will it still work
@daerne10 жыл бұрын
You guys cracked me up. Tire shop wanted $350, I'm going to Walmart and paying $120 bucks and using your technique.
@organizedsolid10 жыл бұрын
$350 to mount tires? biggest lie ive seen in my life lol
@1232bluejays7 жыл бұрын
what about balancing. Could you bend the rim doing it this way?
@DavidLorellHoskins7 жыл бұрын
Thanks!
@goontscr18012 жыл бұрын
Does it work with any size tires ?
@ShadowsOnTheScreen4 жыл бұрын
I can do that! Thanks!
@DCSHEEP15810 жыл бұрын
apparently it took 5 mins to put the tires on the rims.. the video isn't even 5 min long
@DelilahZoe8 жыл бұрын
THANKS!
@MegaDavidHa12 жыл бұрын
if i was to do that on my new rims, it'll be all scratched up after i'm done. did you hear all those bad scraps ?
@ForRealzMedia2K1210 жыл бұрын
tips from this video 1) dont be stupid and scratch all the rim up by rubbing it on the ground 2) make sure u DONT wear sandals 3) dont drink Floridian tap water 4) people from buffalo are scared of rot lol good video :P
@wuligan8 жыл бұрын
Thank you
@mrbreezeet18 жыл бұрын
any good ways to break the bead down? I used my Arbor press once, but it took 2 guys, one to support the wheel/tire, and one to operate the ram. It was sort od "a bitch" guys back when cars had bumper jacks, used to set the base of the bumper jack on the bead, and start to jack the car up. Motorcycle tires, are E-Z just used a C clamp or vise.
@jonathanbreckenridge47588 жыл бұрын
Lol all these people commenting about screwing up your rims. I've done this to numerous rims and not ONE have I screwed up. So maybe rethink how you're trying to put it on...? The way he did it in this video people have been doing for years no problem.
@cdewman7310 жыл бұрын
Please share with us all how you dismounted the tire and then do it with in 5mins.... Also take note to the scratches and ding he put in the rim. Next question, are you putting this on a drive axle? If so, you will have your wheel will spin on the tire causing bead damage.
@jr54012310 жыл бұрын
To get it to beed old shitty tires that don't seem to fit some starter fluid (not allot or you will bust that tire) and a little fire will beed it right up. Obviously you'd want them balanced by a shops machine whenever possible but this method does work if you just need a tire to get you through state inspection with no money spent from getting a shop to do it or get your farm vehicle rolling again.
@sandradavis73116 жыл бұрын
Hey I’m in Buffalo too! You forgot to tell people that they should swap out their summer air for winter air.
@tempingasashaman8 жыл бұрын
I would've done it on the grass not to scratch the rim, but ehh, to each his own.
@sonofnothing8 жыл бұрын
my spine shriveled when he did that. sloppy jalopy
@roberthusk34027 жыл бұрын
Mine too but still informative
@adamsteger86508 жыл бұрын
That's not a breaker bar, it's a pry bar kiddo. Breaker bars usually have 1/2 " drives for beefy sockets.
@reznorslayer8 жыл бұрын
What the hell!!! people just make stupid comments about scratching the rims. who cares??? is NOT your rims anyways... just observe and learn how to do it and thats it... but its easier for many to run their mouth instead of think and learn... JUST SAYING!!!!!! Awesome video by the way...
@sonofnothing8 жыл бұрын
one can run their mouth AND learn. Honestly, they sell spoons specifically for tire mounting/removal, it's not a secret. It hurt my soul when he did that.. I just wasn't raised to treat my vehicles like that.
@edoubleu526 жыл бұрын
Kind of ironic that someone runs their mouth about other people running their mouth.
@lovebigbootie696 жыл бұрын
Sam Munoz you must be one of the idiots in the video!
@antcri7304 жыл бұрын
Mounting is easy, let's see you break one down.
@alexvasquez301310 жыл бұрын
U should open a tire shop right there on your drive way
@ZeroSkipps9 жыл бұрын
was that stuff he was putting on just grease?
@TreDogOfficial7 жыл бұрын
3:47 does the breaker bar handle have to be orange?
@ryanmcdonald53515 жыл бұрын
All that beverage money you saved!!
@cfmotoz86268 жыл бұрын
Let's see you try that with a brand new UTV 8 ply tyre on 14" rim. No chance at all even with an X-tra pair of hands!
@Noises5 жыл бұрын
I didn't know you could get Vietnamese Safety Boots in the US.
@BillMan200210 жыл бұрын
Tire also comes off easier too with grease
@cadenthekook82269 жыл бұрын
ever balance your tire pressure? yeah I'm installing matte black rims let me just fucking rip all the paint off by draging it in circles on the floor.. good job lol
@AzeOfSpadez9 жыл бұрын
who said you would do it EXACTLY like this? Put the fuckin rim on a rug or on the grass and don't fuck your shit. Use your brain instead of looking like a brain dead -cant think for himself- moron.
@analazcano64757 жыл бұрын
he scratched that rim, the noice was making hold my breat
@That1GGirl8 жыл бұрын
what about resetting ur tire pressure?
@cfmotoz86268 жыл бұрын
Pretty handy with the paint brush I see. Might want to take up painting instead before u do too much damage or hurt yourself.!!
@kodymcpheron56708 жыл бұрын
what about sealing the tire popp'n the bead
@reedhatesemail10 жыл бұрын
...and if they won't seat, spray starting fluid in there and wad up a piece of paper. Light the wad of paper or anything really, on fire. Throw at wheel. Makes a cool noise, and seats the tire instantly. Sometimes bigger truck tires will jump. Good times.
@Nilboggen9 жыл бұрын
You guys are ridiculous about the scraping you do realize that that is the inside of the rim and no one will ever see it..... right? I am also quite certain that the integrity of your aluminum/steel alloy rims will be ok. However when I do it I don't use soap just squeeze over rim than loop a ratchet strap over the tire and tighten while putting air in the tire it will pop right on. And then as to the balancing tire pressure that is not rocket science you use a pressure gage and make sure that the tire pressure is the same in both front tires and both rear tires hopefully the optimum pressure listed on the tire.... People that pay for balancing are dumb go to gas station and use the free air usually a gage attached.
@isaacdinardo23257 жыл бұрын
Adam Reese you're so dumb balancing has nothing to do with the air pressure
@augustebenstein68387 жыл бұрын
And I imagine that you think it has to do with the weight around the circle of the tire. So lets say as I am driving my car around road eventually pieces of my rim and tire are worn away over time to create an imbalance across the circle this is called radial force variation. First off I challenge you to buy a brand new vehicle with wheels and zero miles on the odometer and take it to get your tires balanced. I guarantee you will end up with a bunch of weights attached to the rim of your tire. A machine at the place you took it to said it was out of balance. Now the person operating the tire spinning machine has no idea where to put weights to "balance" the tire so he guesses and moves the weights around until the spinning machine says its "ok". Well there are about a million problems with that. Number one the tire isn't the only thing spinning in your car you have an axle and a wheel hub that also spin, which means that although the tire and rim may be spot on it isn't accounting for everything that spins. Number two your axle spins at a constant speed split over 2 of these "balanced" or not tires determined by the amount of gas released into your combustion engine. The real reason that tires will cause your car to vibrate is because the rim which shapes the tire is not longer close enough to a perfect circle (no rim ever made is a perfect circle unless by sheer chance or a miracle). If your car is actually vibrating because your rim is so out of "circle" its time for a new rim not a "tire balancing". Because the centripetal force required to turn the tires with weights on them is increased however only one axle is turning two tires whether they have weights or not so you are using more gas and your tires aren't spinning in sync (granted the more out of sync they are the more it will cause vibrations ergo more friction). In my opinion balancing a tire is a bad patch job that will have to be continuously repeated and when you can buy a new rim for $20-40 that will better your car far more why spend $$ on it?
@isaacdinardo23257 жыл бұрын
You literally talked nothing about air pressure all I said was it has nothing to do with air pressure and the balance machine tells them exactly where the weights go.
@edoubleu526 жыл бұрын
Tires are balanced and tested to meet the manufacturers specifications and then again just before being placed on a new car. They’re not going to be any more balanced than at the time of purchase. Most every dealership and tire shop includes balancing and rotation for the life of the tire upon purchase so it’s not costing anything but your gas & time to balance them. Also, with the majority of newer cars, the sensors in your ABS can give a real time estimate for any unbalance, in turn, taking the guess work out of play. There’s also a multitude of other reasons besides a wheel deformation that will cause vibrating.
@DASUPERSTAR9310 жыл бұрын
How to scratch your rims
@kryptikkk77710 жыл бұрын
3:07 homer simpson? lol
@snowcold9033 жыл бұрын
im not strong or hevy enogh to do this, im struggeling so much after many hours im still not even done with my first tire and im currently struggle on this part 3:43 D:
@dukenukem40436 жыл бұрын
Still missing the video about the necessary DIY wheel balancing you need to do after a tire change.
@oooohhhhhhshizzzzzz7 жыл бұрын
billy hold my beer
@IGOR637210 жыл бұрын
Haw much cost cragar weels SS 300?
@chrisdayton49428 жыл бұрын
Scratching the chrome on the cement
@coochykilla9 жыл бұрын
a more appropriate title wouldve been "how NOT to install a tire on a rim"
@jamesdavies75267 жыл бұрын
I guess I have so much trouble is I don't wear flipflops....
@DanielLove1879 ай бұрын
So quick question is he putting w- 40
@DanielLove1879 ай бұрын
Whats that tool called the one that he is using
@jermainephillips51797 жыл бұрын
good job but try this with some 40 series low pro tires lol
@mikec819 жыл бұрын
lol i posted my comment about them being from buffalo before they said it 2:34 thats funny
@user-oi3bk7tn5o3 жыл бұрын
hold my beer
@Dafastso5 жыл бұрын
lol watching people put tires on rims themselves is the best