How 2 Service a Fox Float X2 | at home and CHEAP

Tool list here All the Special tools I used are here amzn.to/494GCJ7
Fox tech video I copied techniques off • DIALED: Episode #33 - ...
Official Fox instructions www.ridefox.com/fox17/help.ph...

[@davidcauson7008]

As a home mechanic after watching this I'm sending it Fox for a service 😂

[@OtterMTBtech]

If it’s ‘21-‘23 shock they send a new one back 😎

[@dylanparker-stephenson5533]

@@OtterMTBtech is that even if it just needs a service? I may have not yet serviced the one I got in 22....

[@TortangTalongBT]

@@dylanparker-stephenson5533 not all 21-23 X2’s are defectives. If your X2 is, then they’ll replace it with 24

[@Fifmut]

Excellent video.

[@OtterMTBtech]

Cool 😎 💋

[@dems_mtb]

great video! thanks!

[@OtterMTBtech]

Your Welcome comment back if you bleed it without trouble. Its not to hard

[@federicobovari2438]

great man can you do with the float x, it's a while that i would try it

[@OtterMTBtech]

I have the tools and shocks, it looks simple, I ordered just 1 knock off tool on eBay

[@Tannervmtb]

This is gold😂 subscribing

[@OtterMTBtech]

😎 ☝️

[@lorenzoa.5795]

The adapter that you use to pump the ifp to 100 psi is the same needed for rockshox monarch? Because i need one but the original fox is no more available everywhere, so i need to know if the rockshox one is the same

[@OtterMTBtech]

I don’t know about monarch, but the Rcokshox one works, it’s just a extension for the pump no special threads

[@musztardatv]

Do I also need to replace the seals after a whole season of driving?

[@OtterMTBtech]

I don’t if the shock is clean inside. If it’s a mud pie I’d replace

[@loganjacobson2335]

Great video! Do you have one for the float x by chance?

[@OtterMTBtech]

Not yet!

[@mitchdomaas304]

Even if my 2022 works well will they warranty it for a new one?

[@OtterMTBtech]

😎 yes USA at least

[@cesarayala8665]

Is this effort worth? Or should I stick with my easy serviceable rock shox?

[@OtterMTBtech]

Coil is the right answer

[@gophop]

If I only want to fix the slurpy, out-of-the-box Fox garbage, can I just purge the piggyback, hook up to the bleed port and run the fluid back and forth, seal up, pump up the piggyback and g2g?

[@OtterMTBtech]

Did you read the first comment?

[@TheLeesto]

Today I learned I been wiping my ass wrong this entire time cuz I never concerned myself with bubbles

[@OtterMTBtech]

Does it work if you didn’t bleed it?

[@highlandhillwalkin]

No trees where chopped or felled in this video .......Honest