I am building a fiberglass, 1:8 scale Columbia River Gillnetter model and this video has been my bible-thank you! I have just positioned all my stations so I have a long way to go (doing this piece by piece on my social security!😊), but this video gives me hope! Blessings!
@drfiberglass3 жыл бұрын
I use to be a plug/mold builder and it is a lot of work. sand sand sand wax wax and wax some more..... I think after spraying it 3 times with gray durtec I would give it a clear coat then wax maybe 3 times and then PVA for a mold release....
@ericsexton67993 жыл бұрын
Me too!!
@khadardeek7387 Жыл бұрын
Hello sir.i would like to know if uou are able to help me in mold building of a boat that i want to make plz
@jonathandavisofkorn6919 Жыл бұрын
Ditto, this is old school for sure. Glad I got to learn this method in the beginning years of my marine career. Then 5 axis took off, then outsourcing of tooling etc.... Glad I got to "Learn" this before it died.....
@markvittorini51634 жыл бұрын
Always wondered how this was done! Y'all do great work. The video was done just right!
@micro9634 жыл бұрын
It’s just beautiful!! Thank you for sharing. I wish I could do that
@osmansaatoglu99583 жыл бұрын
Seems good so far! Was easy to talk to about his boat Plans t.co/uM8hFDqZOp Guided me in the right direction & helped me understand everything & in the end it was what I wanted
@kazimomar68203 жыл бұрын
You can bro Just get up and sell the equipments and start💪
@mamroberts16393 жыл бұрын
I can do that
@hughbrien49604 жыл бұрын
Just like building a model boat, but on a massive scale! Well done guys, I love the curves at the bow.
@ishmael44893 жыл бұрын
Fantastic video. Thank you!
@timekeeper52754 жыл бұрын
Thank you guys for that video.
@chrish29964 жыл бұрын
Excellent video. Do you build to order or sell boats hulls please. Thankyou
@mswkickdrum3 жыл бұрын
Nicely done video. OMG the sanding.
@user-wc5zg5on7s4 жыл бұрын
Nice video for boat mold constructions!!!
@chrish29964 жыл бұрын
Want one. Great job, excellent video
@shehababdullah39273 жыл бұрын
Hi,can you tell me how many layers has been used to cover the mould ? And the thickness of the fiberglass material ?
@klistoffequipmentmachinery92964 жыл бұрын
Great video, nice job.
@nowisthefuturenitf82103 жыл бұрын
It's the most beautiful and detailed process
@hayezmohairbi2 жыл бұрын
That was very useful. What is the average cost to make one mold for deck and hull for boat size 29 or 30 ft ?
@kyleroudabush67574 жыл бұрын
thats a big boat lol. What kind of wood is used for the planking? can it withstand high temps?
@ExploreComposites3 жыл бұрын
Great video of the process! Did you have lots of blocking out the tooling gel on the inside of the mold from the strip planking printing through? I’ve found it helps to glass the wood plug before fairing but this adds a whole big step and extra cost - but makes the plug surface more stable. Looks like you have a very efficient process - thanks for sharing!
@akhuntfish75573 жыл бұрын
Yes glassing the plug before fairing would be more time consuming and expensive. We always try to keep the overall cost down. This process has worked well for us. A quick finish sanding in the mold took care of any imperfections the strip planking might’ve left. Thank you for the comment!
@keremtopdal2905 Жыл бұрын
@Li Li dont lie... I am in this business and in Turkey we have the same machines and that is impossible to make a this big mold less than a day... this big takes about a week... they use cubic PU material. and because it has to be precise cut the head of the cnc machine supposed to turn fast but move slovely... You dont have that tech in chine only babe, as you learn that tech from germany... so dont make it that china has everything and you know things... plus this is not outdated, still used because that tech is 3-5 times much more expensive than this way...
@guachingman Жыл бұрын
@@keremtopdal2905 🤭
@blong2898 Жыл бұрын
Absolutely amazing work!
@jamaldarius72913 жыл бұрын
great detail but that room could really use a good ventilation system for all the dust and particles from spraying and sanding
@jsbosslerАй бұрын
as someone who's designed quite a few hullforms (lines plans); this one is a beauty
@kingdrew66654 жыл бұрын
WOW...that's super impressive, most people don't realize what it takes to do this.
@keremtopdal2905 Жыл бұрын
@Li Li dont lie... I am in this business and in Turkey we have the same machines and that is impossible to make a this big mold less than a day... this big takes about a week... they use cubic PU material. and because it has to be precise cut the head of the cnc machine supposed to turn fast but move slovely... You dont have that tech in chine only babe, as you learn that tech from germany... so dont make it that china has everything and you know things... plus this is not outdated, still used because that tech is 3-5 times much more expensive than this way...
@jappecoco3 жыл бұрын
Nice info, thx for sharing
@sikskillz21863 жыл бұрын
awesome, what’s the cost for a mold ?
@dennisbasargin65804 жыл бұрын
Miss all that sanding!!!
@titter36483 жыл бұрын
How was the plug removed from the mold?
@danreece96694 жыл бұрын
my dad's gillnetter was built like this..36ft x 11 ft , full throttle it does 21 knots with an in line 300 HP .
@steev9104 жыл бұрын
share with us the plans
@Djm021528463 жыл бұрын
Whats the name of the mold? Looks very nice!
@barryrudge15762 жыл бұрын
What you didn't show was how you extracted the wooden buck from inside the new mould. I can only presume it was very tight and had to be broken up.
@petecommanche9344 Жыл бұрын
As long as you do a thorough job of waxing the final surface of the bucket, the new mould mostly just peels straight out.
@intalik9 ай бұрын
Compressed air. Pops the boat out.
@Royl123454 жыл бұрын
Looks shiny
@guachingman Жыл бұрын
hey thank you for the nice vid, great team work
@garomaint25974 жыл бұрын
Spettacolare. Thank you!
@reelchaoscharters36054 жыл бұрын
What kind of boat? Manufacturer
@nathelm3 жыл бұрын
When I grow up this is exactly what I want to do.
@indarsingh83633 жыл бұрын
Go for it kid . Im a boat builder as well and my career started off as a dream, nothing is impossible, once you have the love and passion for it thats what it takes to be a successful boat builder. Good luck from Don Marine Boating Company. Trinidad and Tobago. 😎😎😎😎😎
@123OGNIAN3 жыл бұрын
Go for it! just remember to always use quality masks.Last thing you want is fiberglass on your lungs.Safety first.
@Ayrco13 жыл бұрын
Wholesome
@ericmoody39442 жыл бұрын
I found a boat shop in the yellow pages 20 years ago, called them up for a job and I still work there. I learned so much more than building boats.
@wonderhuman97122 жыл бұрын
@@indarsingh8363 ;सर क्या मै आप से बोट के बारे मे बात कर सकता हूं नँ पलीज
@alayhan21174 жыл бұрын
Nice looking boat good job guys
@gulfmaster41894 жыл бұрын
AL AYHAN Thank you!
@yavuzozaskin454 жыл бұрын
Everything is very nice but o wonder the result .👍👏👏
@Ronny255262 жыл бұрын
Do you make molds to order? i would like to order a couple of units.
@khadardeek73877 ай бұрын
Anyone who knows how to build such a boat.i am based in nairobi kenya kindly let me know if you can help nd i am ready to pay for whatever it takes thanks
@reinohj98824 жыл бұрын
Me gusta esta labor me gustaría perfeccionarme en un lugar asi
@ahmaddamaj21472 жыл бұрын
What kind of resin dose it need ?
@mitch_the_-itch3 жыл бұрын
How much would just a blank hull cost?
@Kevinthedegenerate10 ай бұрын
I’m confused as to how the mold come off the stand when the curvatures are being placed. How do they not attach it to the stand
@user-ny5be4lm8z3 жыл бұрын
I am interested in knowing what is the white paint used on the mold and the primer are they some special type or regular wood primer cheers Ed
@akhuntfish75573 жыл бұрын
White is just drywall mud, and the primer is an automotive primer
@daviddiehl1972 жыл бұрын
Hell, I'd buy the plug and make a boat out of it.
@mohaabdi80564 жыл бұрын
What are the layers of paintings you’re applying and why do you have to sand them every single time you apply them?? Thanks for your answers. Much appreciated!
@gulfmaster41894 жыл бұрын
moha Abdi The first coat is paint (Gelcoat) after applying fiberglass over Gelcoat the surface gets sanded after curing before other layers of fiberglass gets put on. 2-3 layers can be put on at a time while wet.
@mohaabdi80564 жыл бұрын
Gulf master thank you so much for your answer. I really appreciate it.
@IamWeeklyBills2 жыл бұрын
I have a hull already built that went out of business in the early 90s and I wanted to make some slight changes on the hull and make a mold out of it. What is the best way to make a mold from a hull already built? Do what u guys did and use it as a plug and then build around it?
@akhuntfish75572 жыл бұрын
Yes probably best to use the hull as a plug after fixing any blemishes and making the changes.
@junity13 жыл бұрын
How was the hull taken out of the mold ??????????????
@sergiomarmayen57022 жыл бұрын
Que materiales le colocó a el molde para el alma. O la estructura queantiene a el molde?
@nonzensy15543 жыл бұрын
what is the gel coating and what brands are offered? and how do you flatten the screwing holes?
@jamaldarius72913 жыл бұрын
3M marine filler or “bondo” works great for filling screw holes, a lot more structural integrity than fairing compounds
@raimunderdwiens15024 жыл бұрын
Hulls for Fishing Boats?
@codypowers38562 жыл бұрын
What’s used as the core??
@rocketman56483 жыл бұрын
Thank you...
@JOEGGGJOE2 жыл бұрын
Awesome music.
@nathansteinberger363410 ай бұрын
Parabéns pelo capricho
@NASTYVIDS3 жыл бұрын
What hull/shop ?
@hawkie3332 жыл бұрын
Very impressive!
@shofiuddin89693 жыл бұрын
I am looking to follow all the procedures of this video to make it for fun!!! I just want to ask you if Will be expensive to build a fibreglass speedboat or just buy one?
@charonstyxferryman3 жыл бұрын
Go with buying the cheapest speed boat hull one you can find, i.e. no motor, and a speed boat that are more shipwreck than boat = you has to be good at fiberglassing. You can also make a composite boat : Take an existing wooden boat, make the hull in a perfect condition, but minus paint and tar, then make it *very* dry before you're fiberglassing the wooden hull You can also use an existing wooden boat as a mould, remember to dry the (unpainted!) wood or you will get problems with the fiberglass end result.
@jaquigreenlees3 жыл бұрын
Less costly to buy one than build one. There is a massive amount of engineering going into a speed boat hull, any mistakes in construction and boat sinks. Buying one you have a builder to hold responsible for shoddy work in that case. ;)
@blakanal72223 жыл бұрын
Why are there no stringers on the hull?
@user-wc5zg5on7s4 жыл бұрын
I'm wondering if you can film the part of main deck or flybridge.
@gulfmaster41894 жыл бұрын
林家豪 kzbin.info/www/bejne/iF6vdGiNl52tgKc
@miffyleslie Жыл бұрын
Where can I get the plans and framing to make a plug? Is there somewhere that sells kits or something? Very interested in making a plug.
@gulfmaster41897 ай бұрын
We drew up the plans to scale, top view, bottom view, side view, all the frames are measured to scale, cut and built no computer, old school.
@oundhakar3 жыл бұрын
Isn't that stern too flat? I'd have expected some curvature and slope here.
@Tingtvph92263 жыл бұрын
my dream is to build a boat like this to travel around the nation.
@indarsingh83633 жыл бұрын
Awesome job.😎😎😎😎
@andyw38513 жыл бұрын
How to build a fiberglass boat... Step one: build a wooden boat
@tristanmccauley23183 жыл бұрын
Lol
@dangabrielyurango28024 жыл бұрын
Is that supposed to be water jet propelled?
@chamnaplim11957 ай бұрын
May I know the materials used to make core for this boat mold, please? It's such an amazing work. Thanks for sharing!
@BasarginBoats6 ай бұрын
It’s an end grain balsa wood core. Thank you!
@mt20202 жыл бұрын
I wish you would have shown the removing of the wood frame from the inside
@sametsenturk73814 жыл бұрын
good job
@henrysantos121 Жыл бұрын
Magnificent Job well done,
@screens19793 жыл бұрын
I love the smell of fiberglass in the morning... 😐
@jamaldarius72913 жыл бұрын
you notice how there’s no ventilation system in that room? those guys walking around without respirators when they were spraying primer must have lungs of steel or just don’t know the dangers
@rotaxrider2 жыл бұрын
What’s the name of this hull?
@sabiqsadiq14773 жыл бұрын
Good ideas....
@sul-barmaritim43633 жыл бұрын
Waoo beatuful👌
@JamesJones-cx5pk2 жыл бұрын
The wax between is what helps them separate. It's just like bedding a rifle.
@user-bh5zb2xo6w3 жыл бұрын
Price??
@rafikbholim2523 жыл бұрын
Very nice wonderful video
@efrainberrios84944 жыл бұрын
Awesome!!
@madikinteh88603 жыл бұрын
Great job ✊🏾❤️💪
@kolsen63304 жыл бұрын
Damn... Whats with the clouds of nasty dust??? How hard is it to get an old furnace fan and tape a couple of furnace filters over the outlet to pull all the dust out so you can see what the heck you are doing. Take it from an old shipbuilder, that that dust is an annoyance now, wait till you get older and it all catches up with you.
@user-ll3wm9op2v3 жыл бұрын
There are good used lungs sold on ebay, at breath taking price 😅
@alexandergunarso23083 жыл бұрын
How long it takes to finish the mold?
@akhuntfish75573 жыл бұрын
This process took about 3 months
@yoog14 жыл бұрын
Great video! Just wondering, how many times can a boat mold be used?
@gulfmaster41894 жыл бұрын
D K 20-30 times or more.
@doncunningham31244 жыл бұрын
I'm a Tooler at a well known boat manufacturer. We have molds that have been producing parts ( boats) for many years now. Proper materials as well as maintenance will make them last a long time.
@trevor52903 жыл бұрын
Incredible cost of man power and epoxy etc etc.. no wonder they cost so much.
@DanTheManIOM3 жыл бұрын
what material is the planking ? 1/4 plywood ? IDK
@akhuntfish75573 жыл бұрын
1/2” mdf
@okiedoak2014 жыл бұрын
Where did all the wood framing go after it was flipped...
@user-ll3wm9op2v4 жыл бұрын
Trash,
@akhuntfish75574 жыл бұрын
The wood framing (the plug) was removed from the mold and taken to the trash, not reusable
@kyawkyawtv9493 жыл бұрын
I don’t understand, they applied the fiberglass outside the mold when it finished they remove it from inside
@lindamermaid3 жыл бұрын
Can you say PPE? Do you know what it's for?
@shichenjie59183 жыл бұрын
Shall we have a new cooperation mode with you?
@h.s764 жыл бұрын
Good morning sir Do you help me to make mold of slide
@cgriebel18 ай бұрын
Unless I missed something...when did you guys remove the framing/wood plug structure? It appears you omitted the process entirely? The video goes from flipping over the entire plug/mold to morphing into a real mold, sans framing structure. What was involved in the removal of the wooden structure, and when was this process done??
@BasarginBoats8 ай бұрын
There was no footage of this step, but the plug/framing was broken apart and removed by hand after the mold was flipped over.
@cgriebel18 ай бұрын
Yes, I caught that when it was flipped. Thanks!!
@ryanembry90594 жыл бұрын
Sure don't miss making these things
@MinTerGyi007 Жыл бұрын
ချစ်စရာလေးပါ ❤️🌊⛵👍🏼💯
@thennarasanarasu55994 жыл бұрын
Super
@rdeanbenson2174 жыл бұрын
thanks for the beginnings of the BOAT...could we have the follow ups on the rest of the build?
@akhuntfish75574 жыл бұрын
R Dean Benson There will be a video of a complete boat in about a month or so
@Mr_Damion_Scott4 жыл бұрын
Awesome
@34136TS Жыл бұрын
Not sure why in this day and age - design in 3D CAD then unfold digitally and laser cut the panels, will fit together like an Ikea flat pack.
@coboloco11503 жыл бұрын
The beauty of bottom v ✌️
@NicsHODLN11 ай бұрын
If I could find one I'd use the mold itself as a boat.
@tristanmccauley23183 жыл бұрын
All that work before a boat is even built, if that mould is looked after you can build plenty of boats out of it. Bloody big boat.
@luismasso23744 жыл бұрын
Soo cool👍👍
@SC-vw1nx4 жыл бұрын
Can we make a catamaran? Where you guys base ?
@gulfmaster41894 жыл бұрын
S C no catamaran yet, we’re commercial boat builders out of Homer, Alaska.