How And When To Replace Tyre Sealant In Mountain Bike Wheels | The Tubeless Refresh

  Рет қаралды 182,339

GMBN Tech

GMBN Tech

Күн бұрын

Пікірлер: 154
@headoverbars8750
@headoverbars8750 4 жыл бұрын
"... then go to town, But not really, we're in lockdown you sausage! That was hilarious lol,... Henry 🤣😜
@cccpkingu
@cccpkingu 4 жыл бұрын
Ya sossig!
@davidmorris8121
@davidmorris8121 4 жыл бұрын
My first tubeless set-up was with a set of Bontrager XR2s, with Stans sealant. They lasted 3 years, & only punctured ONCE, when the tyres were COMPLETELY worn (rear)! Tubeless has been mega for me, & is worth all the faff to set-up!
@rdx1419
@rdx1419 2 жыл бұрын
XR2s scare me. I have crashed more in my three months of owning those tires than I have in my whole 4+ years racing
@kpflugshaupt
@kpflugshaupt 4 жыл бұрын
How to „de-Blake“ a wheel… 🤣
@jcsrst
@jcsrst 4 жыл бұрын
Thanks for the vid! Boy oh boy muc off is making their presence known on the internet.
@rupedog
@rupedog 4 жыл бұрын
Love the comedy metaphors!😁
@hubdeep9452
@hubdeep9452 4 жыл бұрын
I haven't changed the Stan's sealant in my tyres for 10 months. The other day I pulled a thorn out and to my relief it still sealed. They're not even tubeless rims 😅
@kevinbowe
@kevinbowe 4 жыл бұрын
I have never heard of Glue and Sealant Remover. Thanks for sharing. -- I have a 'mess' the previous owner made. This product will help me out. -- The bike has a set of tires/wheels, that the previous owner, set up tubeless but they simply leak air no matter what I try. -- I intend on converting them back to tubes and use them for commuting. This product looks like it will clean the wheels and tires so I can install new tubes in a clean tire/wheel. No nasty/sticky leftovers.
@smokedsalmon3907
@smokedsalmon3907 4 жыл бұрын
I just continue to add sealant to the old dried stuff and add more pieces of tape over any sections that don't look good. This seems like the smarter way to do it.
@khchoi2012
@khchoi2012 Жыл бұрын
That means eventually you fill the whole tyre with sealant!
@Philatlondon1
@Philatlondon1 2 жыл бұрын
Really helpful. I've just gone tubeless on some 'tubeless ready' Racing Ralphs. They were so floppy on the rim it was impossible using a track pump and I had to buy a new pump, use a couple of extra wraps of duct tape over the top of my Muc-Off tape. And they seeped sealant from the side walls, so not convinced of the tubeless ready claims. However, I've left them 24 hours and they seem to be staying up now. I hope the effort is worth it.
@rupedog
@rupedog 4 жыл бұрын
I just scoop out the old sealant from tyre I'm taking off, pour into tyre going on, top up a little (10-20ml) as necessary, wipe clean inside old tyre with a rag. Simples! But thats because I use Slime STR premium tubeless sealant... doesn't dry out between twice yearly seasonal tyre swap, so unlike all the latex with ammonia based ones, zero maintenance! And co2 safe!
@ltrtg13
@ltrtg13 4 жыл бұрын
So far I have kept my tubeless sealant in my tyres by not puncturing and not using my bike as much as I have done. Finally converted to tubeless. Not long before this frigging COVID19 lockdown.
@villimagg
@villimagg 4 жыл бұрын
Henry has the most valuable videos!
@gmbntech
@gmbntech 4 жыл бұрын
Glad you enjoy them Villi!
@johnmartin227
@johnmartin227 4 жыл бұрын
Why does Henry's place look like a care home? What're you paying him?
@the_spanner_ch7mp
@the_spanner_ch7mp 4 жыл бұрын
Great stuff Henry From now on I'll use the phrase I'm De-Blaking my wheel/tyre 😂 👊🤘
@keananconnor4221
@keananconnor4221 4 жыл бұрын
Legitimately this is the how to I asked for
@lfcgatti
@lfcgatti 4 жыл бұрын
Hello. My question is: How do we clean the sealant glued inside the tire? Do we need to clean it? Thank you very much in advance!
@Ricochetmex
@Ricochetmex 4 жыл бұрын
lfcg73 I tried it once and didn’t finish the job, it was too time consuming. Then I read that it’s not recommended because is too difficult, you can damage the inside of the tyres and unplug holes that the sealant has already seal. But I don’t know if that glue remover makes it easier...
@karsonranck6185
@karsonranck6185 2 жыл бұрын
This guy was fun. Great to watch 👍🏼
@larshalstrom3223
@larshalstrom3223 4 жыл бұрын
I've used a rubber racquet ball and rubbed off the sealant off the beads in about 15 minutes with it.
@khchoi2012
@khchoi2012 Жыл бұрын
I've just tried a normal hand washing nylon brush this afternoon but ended up with a wire brush to remove any congealed sealant on the inside of the tyre.
@BushcraftAI
@BushcraftAI 2 жыл бұрын
I love you guys contents with the sense of humor : )
@niklasdr
@niklasdr 4 жыл бұрын
So, how were you able to get sealant out from inside the rim? Where the sealant had started to come out through spoke holes and then inside between the spoke holes?
@MTBinKY
@MTBinKY 4 жыл бұрын
That's what I'm wondering, too.
@niklasdr
@niklasdr 4 жыл бұрын
Bob Baldridge I thought it sounded like he was going to explain how to do this part, but no 😆
@ivanperica3731
@ivanperica3731 4 жыл бұрын
I usually paid 1.5 € for a valve core this ebay tip never came across my mind thanks my dudes!
@TrailPOV
@TrailPOV 4 жыл бұрын
Love the comedy throughout!!
@EpicEvolution
@EpicEvolution 4 жыл бұрын
Tip for weight weenies. One of my friends invented this. He set up wheel with inverted tyre and camera and then inflated it. If you do so, it's much more easier to get out old sealant using sand paper.
@peterlang5047
@peterlang5047 4 жыл бұрын
Всякие байки oh so inflate the wheel inside out just to get the sealant off? That’s pretty smart
@tychoMX
@tychoMX 4 жыл бұрын
That's pretty clever. I try to clean up CX tires from last season and they are sometimes a mess.
@RalphIvanDelaTonga
@RalphIvanDelaTonga Ай бұрын
Man does time flies
@tyrionas
@tyrionas 3 жыл бұрын
i just cleaned up my tire yesterday off the dried out sealant without using the glue/sealant removal spray, it was a nightmare but managed to seal the tire nicely.
@JK-ki7yv
@JK-ki7yv 4 жыл бұрын
One of the best vids. 👌
@grantwallace1882
@grantwallace1882 3 жыл бұрын
This is exactly the video I needed. Thanks GMBN.
@johnreese3762
@johnreese3762 Жыл бұрын
Thanks, I needed that!!
@joshuamelendez2967
@joshuamelendez2967 4 жыл бұрын
Can I clean the junk in the tire from the dried up sealant. Of should I leave it in the tire
@p0t4toePotato
@p0t4toePotato 4 жыл бұрын
had put on brand new tires, after 2 weeks of riding the rear wheel had so many punctures that when i changed tires it was completely dry, the front wheel still had a decent amount of liquid sealant. now i managed to spray lubricant on my brake disk and am out of degreaser, gotta go buy a can...
@rp003.0
@rp003.0 4 жыл бұрын
one of those weeks huh? happens to the best of us cheers 😂
@ma14.27
@ma14.27 7 ай бұрын
Just converted a MBT to tubeless for the first time, the rear tyre works perfectly, but the front tyre is losing air through the spoke holes. :( Thanks for the video, I at least know how to fix it now.
@danielleinad5135
@danielleinad5135 Жыл бұрын
Ahhh thanks.. now I get it :D I didnt destroy my inner tube, just the valve. Cause I have the Tyre Sealant in the tyres, which makes it automatically tubeless. But then I dont understand why they let me buy an inner tube, when I dont need them.
@povteer
@povteer 4 жыл бұрын
exactly the video i need after 2 months of home quarantine bike is stuck, probably need to check the sealant
@joseph-the-seventh
@joseph-the-seventh Жыл бұрын
Do you need a special pump to seat the tubeless tires? Also wondering, my RaceFace rims came taped from the factory. Should that tape be removed when cleaning the inside as shown in this video, or can the factory tape stay in place and reused?
@geraldhenrickson7472
@geraldhenrickson7472 4 жыл бұрын
I feel the 2-4 oz recomendation does not apply to any larger mountain bike tire. It offers poor protection and dries out even faster. I use 6 ounces on any tire over 1.95 width.
@okidoke4822
@okidoke4822 9 ай бұрын
"Deblaked" i like it.
@pickleboy1600
@pickleboy1600 2 жыл бұрын
Hey yall so for my tyres do i need to replace the rim tape and do i even need to take it off if im just replacing the sealant?
@MJ4183
@MJ4183 4 жыл бұрын
Does the glue remover work with tyre covered with sealant?
@mortadhaabdul565
@mortadhaabdul565 4 жыл бұрын
Yes
@AncientGreek
@AncientGreek 3 жыл бұрын
My Tyre still has some old sealant, should i remove it before adding new Fresh sealant (different brand)?
@daddymonmon1
@daddymonmon1 4 жыл бұрын
Hi. I bought a specialized pitch that I had setup tubeless and I have been using it as a commuter bike to work with the occasional leisure rides for 6 months now. I live in the Philippines where its either hot or wet. Can you recommend when is the good time to do tubeless maintenance? thanks
@donbenincasa7442
@donbenincasa7442 4 жыл бұрын
Can you show more detail on how to have less trouble wrestling the wheels off the rim and how to do it without damaging anything :) thanks and cheers
@niklasdr
@niklasdr 4 жыл бұрын
d. benincasa see my comment to KENNY MTB
@porroco
@porroco 4 жыл бұрын
I had a punture on my new maxxis DHR tubeless set up with sealant, need to know if i want to keep using the same tire do i need to go now with tube?
@richjones2767
@richjones2767 4 жыл бұрын
The muc off and other valves come with a few different seals, which one should you use, when and why?
@RocketMagnetUK
@RocketMagnetUK 4 жыл бұрын
Depends on your rim profile and the best fit with the valve seal, so take a look at your wheel and/or check out the original valve seal shapes if it came with them. A small patch of innertube with a small hole pushed over the valve before you put it in the wheel can get you by sometimes and make up for a poor seal but this is bodging it. At the end of the day a selection of valves with different profiles is always handy to have IMO.
@jake30966
@jake30966 4 жыл бұрын
Hi , I have put gorilla tape and the plastic rim tape on my wheel and blew it up and tested it in bath of water and there's air coming out my spokes , I already had done wheel and it went flat after 1 day and it was same thing air coming out of spokes , what am I doing wrong ?
@inthehead1763
@inthehead1763 4 жыл бұрын
Noice. Im off to the shed to do this now....cheers
@DirectorLJ
@DirectorLJ 4 жыл бұрын
Skip to 2:00 where anything useful starts to get said.
@James-dn1hu
@James-dn1hu 4 жыл бұрын
#AskGMBNTech my bike has a hollowed out frame and there are holes near the bb she’ll close to the shock mounting point. After washing my bike I have to put it upside down for a bit to let the water drain do you have any tips of what I could do. It’s a vitus sommet if that helps
@hippymtnbkr
@hippymtnbkr 4 жыл бұрын
#askgmbntech Is it better to have mtb suspension fork stanchions that are larger? My fork only has 30 mm, and I'm a big guy. Shouldn't a thru axle make the fork stiffer?
@knlv9672
@knlv9672 2 жыл бұрын
0:37 with your eyes closed lol
@jackmarshall2535
@jackmarshall2535 4 жыл бұрын
#AskGMBNTech I recently bought the Trek Roscoe 8 2020 which has Maxxis Rekon 2.8 tyres. I was wondering if it would be a bad decision to change my front tyre to a 2.5-6?
@TheKingsteez
@TheKingsteez 4 жыл бұрын
Figured it out
@IronEdge420
@IronEdge420 2 жыл бұрын
where in lock down you sosage 😂 that turned my bad day a little bit better
@jimsec7344
@jimsec7344 4 жыл бұрын
#askgmbntech Is the Continental race king a good tire for hard packed dirt and some street for my canyon stiched dirt jumper??
@peterlang5047
@peterlang5047 4 жыл бұрын
Jim Sec I’m not a fan of continental, but loads of slopestyle athletes use the race king
@Bithu
@Bithu 4 жыл бұрын
Riding today I lost a load of tire pressure, I thought it was just a big burp (was hero dirt, much more traction and schralps than usual in dry old western aus). Chucked some air in, kept riding, got home and washed bike to find air leaking out between the rim and the tire. There is slight damage to the tire on the sidewall there, none on the rim. Any idea what could have happened before I pull it appart?
@nikounourbakhsh8433
@nikounourbakhsh8433 2 жыл бұрын
My best guess is it was an old tire on top of a big burp cus the bead likes to get wear when the tire gets old and a big burp could pull it off some of the tire. I am just realizing this is two years late lmao.
@danielg.3992
@danielg.3992 4 жыл бұрын
Is it better to run tubeless if your just casually riding and from time to time somewhat gnarly trails? Or just keep the tube?
@simonarends7802
@simonarends7802 4 жыл бұрын
It's always lighter than an inner tube and you can start playing around with tire pressures even tho you are not getting a lot of flats at the moment.
@FIGHTTHECABLE
@FIGHTTHECABLE 4 жыл бұрын
Yeah easy with no cush core inside. Try getting a magic marry tyre off that has wintered in tyre sealant with cush core on a DT Swiss carbon rim. Took me 1 hour atleast to change 1 Tyre. But thanks for that sealant remover tip, I will apply next time
@zsanterre
@zsanterre 3 жыл бұрын
0:37 same
@liammcbride4236
@liammcbride4236 4 жыл бұрын
I gotta try the crocs one day.
@guitarman1234567891
@guitarman1234567891 3 жыл бұрын
Does that mean you have to de-tape, clean rim, re-tape every 4-6 months then add new sealant?
@jonathanleis8874
@jonathanleis8874 3 жыл бұрын
No. You dont have to do that. Only if the wheel isn't in use. And you most likely won't even have a tyre on. :)
@keithboone4800
@keithboone4800 4 жыл бұрын
Why not pour it in before seating the tire?
@lukemtb6800
@lukemtb6800 4 жыл бұрын
Would you know why my tyre keeps burping? I'm running a michelin wild am 27.5x2.8 on nukeproof horizon wheels 18psi. I'm only 10 stone. Wheels and tyres are both brand new and after a spirited ride I have signs of sealant around the bead. If I put the pressure up it cures the problem but the tyres are way to hard. #askgmbntech
@givemeakidney
@givemeakidney 4 жыл бұрын
I'd suggest you'll need thicker side walls to run 18psi without a tyre liner if you're hitting then hard.
@rupedog
@rupedog 4 жыл бұрын
That's very low pressure for that size. Try also adding another single wrap of rim tape if running say 22psi doesn't help. 10st isnt super light, its about low average, especially by the time u add weight of water on bike/urself
@lukemtb6800
@lukemtb6800 4 жыл бұрын
@@rupedog most plus sized tyres run around 14 psi
@peterlang5047
@peterlang5047 4 жыл бұрын
It sounds like you’re a spirited rider who rides hard. If I were you, I would probably get a tire insert. It seems like Rimpact is good value
@niklasdr
@niklasdr 4 жыл бұрын
Peter Lang ...or CushCore.
@DaveWorld
@DaveWorld 4 жыл бұрын
Nice tyres
@Blakksheap
@Blakksheap 4 жыл бұрын
MultiSeal's FlatOut lasts the life of the tire or 10 years, whichever comes first.
@cccpkingu
@cccpkingu 4 жыл бұрын
Have you used it on a bike?
@Blakksheap
@Blakksheap 4 жыл бұрын
@@cccpkingu Currently using it in my fat tire ebike that I converted to tubeless. No issues at all.
@philwebb606
@philwebb606 4 жыл бұрын
Can WD40 be used to clean the old rim tape residue?
@gmbntech
@gmbntech 4 жыл бұрын
It'll leave a film, also you would have to first remove your disc to make sure you don't get any on that! A few brands such as our partner Muc Off have products that specifically remove tubeless gunk and rim tape stickyness!
@TheNicagator
@TheNicagator 4 жыл бұрын
"Blake rides likes it's stolen" oh man had me busting.
@turbochicken80
@turbochicken80 4 жыл бұрын
nice
@rupedog
@rupedog 4 жыл бұрын
Or...just use Slime STR premium tubeless sealant and avoid all that cleaning... easily lasts a year even with limited riding, seals great for real world punctures. No faff, simplest least maintenance way for quality tubeless set-up.
@rupedog
@rupedog 4 жыл бұрын
Its co2 safe as well. And no ammonia.
@mtbrider8286
@mtbrider8286 4 жыл бұрын
Do you think it's humanly possible to find shorts any tighter? LOL!!! Thanks for the great info.
@ltrtg13
@ltrtg13 4 жыл бұрын
It's always puzzled me. Is there a "clockwise" and "anti clockwise" for digital clocks and watches?
@ltrtg13
@ltrtg13 4 жыл бұрын
How hard did Blake throw the wheel? All the black rubber has come off the tyre and left those god awful later 90's tyres with the weird sidewall colour. Come to think of it. Doesn't the yellow stripe on Blake's wheel make it a Mavic wheel?
@2nd3rd1st
@2nd3rd1st 4 жыл бұрын
I wonder what a sealant would look like in the wild
@jaythorpe2536
@jaythorpe2536 4 жыл бұрын
they should have Muc Off as a sponsor..
@ricosuavez_uk
@ricosuavez_uk 4 жыл бұрын
Jay Thorpe GMBN has... 💣
@explorewithluke
@explorewithluke 4 жыл бұрын
Lol i haven’t put in new sealant in ages bc it’s expensive
@ka81alex
@ka81alex 4 жыл бұрын
Almost 6 mins for muc-off commercial.. Nicee..
@peterlang5047
@peterlang5047 4 жыл бұрын
O it was a well done commercial that didn’t feel like a commercial 👍
@WIPEYOURLENZ
@WIPEYOURLENZ 4 жыл бұрын
I love how in all theses type of videos they just pinch the tyre off the rim with their fingers. But in reality you end up using a Vice.😁
@niklasdr
@niklasdr 4 жыл бұрын
KENNY MTB you do know it actually is super easy as long as you sit the rest of the tire in the trough in the middle of the rim bed.
@WIPEYOURLENZ
@WIPEYOURLENZ 4 жыл бұрын
Niklas Du Rietz Bollocks I have just done both my wheels and that’s the problem getting the first part of the bead into the rim bed. Yes it easy after that.
@niklasdr
@niklasdr 4 жыл бұрын
KENNY MTB I just did two wheels a couple of days ago and it was easy again. One was a 27 Specialized Butcher 2,8 Grid on a Royal Traverse (29 mm inner width rim) with CushCore; the other a 29 e13 TRS+ rim with a TRSr tire
@niklasdr
@niklasdr 4 жыл бұрын
KENNY MTB I just put the wheel to my chest and see to that I stretch the tire bead inside that trough in the rim bed. Another way is to use their tip to stand the wheel on the floor and push a soft hammer handle down on the rim with your foot to be able to pull and keep the tire stretched inside the rim trough/bed. And of course where the valve is will always be the last part to put the tire on or off as it would otherwise keep the tire to be able to sit in the rim trough/bed there. Good luck!
@charlieroberts3171
@charlieroberts3171 4 жыл бұрын
Ive had tubeless sealant in my front wheel for 2 years and it still hasn’t dried out😂
@MtbEMS
@MtbEMS 3 жыл бұрын
What’s the weather like in your area?
@charlieroberts3171
@charlieroberts3171 3 жыл бұрын
@@MtbEMS wet, rainy and muddy in the winter. Can be super sunny and hot in the summer
@MtbEMS
@MtbEMS 3 жыл бұрын
@@charlieroberts3171 hmm interesting, same here in Ecuador.
@charlieroberts3171
@charlieroberts3171 3 жыл бұрын
@@MtbEMS i used Stans no tubes sealant. I recently had to change it as i was changing tyres.
@ExcelInstructor
@ExcelInstructor 4 жыл бұрын
#ASKGMBNTECH - hey guys, oi agree you made so many tubeless - related videos, why not make last one - and becouse some of the stuff is outdated and new tech is going out, new sealents, tyres, tapes and such, why not make 1 new video from scratch using most recent new tyres type new sealants, introduction to 10 most used tubeless kits and make 1 tyre of each kit and compare? like all-in-one full tubless encyclopedia kind of thing?
@lancekiroha9768
@lancekiroha9768 4 жыл бұрын
hey im denis,what if my tyre gets flat and i dont have the fluid?what else can i use for emergency
@RaglansElectricBaboon
@RaglansElectricBaboon 4 жыл бұрын
Carry a spare tube
@retovogler103
@retovogler103 4 жыл бұрын
Dude‘s funny.
@harrybryson1130
@harrybryson1130 4 жыл бұрын
#askgmbntech I have a trek marlin 5 (small size) and I am looking for some budget upgrades to it around £200. I know about the handlebar adjustments but are there any good ways to go 1x with a big cassette or any good rockshox forks that would fit my bike. I know there is discount at chain reaction right now and it’s my birthday coming up soon so a quick response would be greatly appreciated. Also, I have noticed a few forks that are 140mm (my bike has 100mm right now) is that too much of a jump in travel? Help me out here Doddy love the videos! xD
@williambenitez5908
@williambenitez5908 Жыл бұрын
No issues with assembly for me kzbin.infoUgkxHL1v1R3NE5x4KiYfyt8dnQmyNYz7qi5L but I could see where some might benefit from using an experienced bike assembler/mechanic. I'm an older rider starting back after a 10 year break. This bike exceeds my capabilities and has been easy to get comfortable riding. I'm mostly on easy trails with almost no street riding and have not been disappointed with the performance of the bike. My fitness level is far below what I previously rode with and because of that the mileage is going on the bike slowly. While I'm losing weight slowly, the bike seems to tolerate my 220 pounds just fine. The bike has been used by several family members ranging from 5'5" - 5'9".
@tigerbalm666
@tigerbalm666 3 жыл бұрын
"Tubeless" unless u r a pro, BIGGEST HYPE in the last 5+ years! More hassle and $$$ than worth. I change my mtn bike tires and tubes at least every 2 years...never had a flat. No muss no fuss!
@Jocool0785
@Jocool0785 Жыл бұрын
Strap on some Fillmore valves and never look back
@shiro4585
@shiro4585 4 жыл бұрын
i love how he low key attack people
@LtEdPell
@LtEdPell 3 жыл бұрын
Blah Blah Blah 2:03 Useful information.
@Canigetanawwwwyyyyeeeah
@Canigetanawwwwyyyyeeeah 2 жыл бұрын
In good ole procrasination fashion. I accidently left mine in for a year....🤦‍♂️ you wanna see how dry it was. So much cleaning. Days. Never again. Let my failure be a lesson folks. 🤣🤣
@carlingas666
@carlingas666 2 жыл бұрын
Not the same wheel that was tossed.
@spfttt
@spfttt 4 жыл бұрын
The answer to this question is: NEVER. Because, you want to never put it in in the first place. Sealants like Slime etc. were NOT intended to be used as preventatives. They were designed to be used only AFTER you get a flat, as a way to get going again quickly. If you just dump Slime in your tires, it will eventually get into the air valve. When you add air to your tire and open the valve, if some slime gets in there as a bit of air escapes, it will dry in there, and prevent the valve core from closing completely. You will have a slow leak. Very few people suspect a leaking valve core and will be puzzled for quite some time, looking for a leak.
@tychoMX
@tychoMX 4 жыл бұрын
Respectfully disagree. Even Slime does - which is why they sell you Slime inner tubes preloaded with the sealant inside.
@spfttt
@spfttt 4 жыл бұрын
@@tychoMX - THAT does NOT mean Slime doesn't jam valve cores. I am not the only one who has had the experience. I am speaking from FIRST HAND knowledge, not speculation.
@jodelboy
@jodelboy 4 жыл бұрын
replace tyre sealant? nope, just chucking a bit of water in the tyre every now and then.
@SnootchieBootchies27
@SnootchieBootchies27 4 жыл бұрын
Very interesting. Does this actually work? I mean, it makes sense
@jodelboy
@jodelboy 4 жыл бұрын
@@SnootchieBootchies27 works for me on my 24" drilled trials rims
@SnootchieBootchies27
@SnootchieBootchies27 4 жыл бұрын
@@jodelboy Thanks man, I might have to try this next spring.
@jodelboy
@jodelboy 4 жыл бұрын
@@SnootchieBootchies27 NEXT spring?
@SnootchieBootchies27
@SnootchieBootchies27 4 жыл бұрын
@@jodelboy well, I already just put in new sealant this year
@londontrialscat
@londontrialscat 2 жыл бұрын
Mucoff sealant is junk...failed me on both tyres
@carloswithac
@carloswithac 4 жыл бұрын
Henry, you sausage!
@jussitanskanen3583
@jussitanskanen3583 4 жыл бұрын
Pressure washer
@519348
@519348 3 жыл бұрын
Didnt finish make me crinch
@tfmaus
@tfmaus 4 жыл бұрын
I despise this Henry guy...I can't help it...it's stronger than me...and I don't know where it comes from
@sfer1
@sfer1 4 жыл бұрын
It's probably the fact that he doesn't seem to know much, but he acts like he's an expert mechanic.
@kdubyaw3246
@kdubyaw3246 3 ай бұрын
just tell me how to do it, I don't care what blake is doing, I'm off to another channel that is about business
@dfcnt1625
@dfcnt1625 6 ай бұрын
This guy lost my interest in 10 seconds, speak up man!
@uclajd
@uclajd 3 жыл бұрын
Unfortunately Muc-off doesn't sell that glue remover in the USA. Our ecology religion is probably the reason.
@MartinTeerly
@MartinTeerly 4 жыл бұрын
It's time for unsubscribe. This videos turned in one big advertise 🤷🏻‍♂️
@DirtSailor5
@DirtSailor5 4 жыл бұрын
I'm not going to unsubscribe but it is getting harder to tell what they like verse what they're paid to say they like. You give Doddy a turd and he will point out how spectacular the bits of corn look and compliment the time it took to get all the details just right.
$1 vs $500,000 Plane Ticket!
12:20
MrBeast
Рет қаралды 122 МЛН
Ozoda - Alamlar (Official Video 2023)
6:22
Ozoda Official
Рет қаралды 10 МЛН
When and How to Add Tire Sealant
9:12
Clint Gibbs
Рет қаралды 252 М.
7 Ways You're Destroying Your Mountain Bike | MTB Maintenance Tips
15:48
Easy Hack for Tubeless Tyre Sealant Removal
6:22
GCN Tech
Рет қаралды 140 М.
Mountain Bike Tubeless Tyre Set Up 101 | GMBN How To
16:16
GMBN Tech
Рет қаралды 714 М.
How To Remove Tubeless Sealant From A Bicycle Tyre - Bike Maintenance
4:18
Ribble Valley Cyclist
Рет қаралды 73 М.