How are Beyblade X launchers SO strong??

[@rinchanlife]

end of beyblade x: the launcher is powered by 50 cal blank rounds

[@HungryMan9165]

Lol made me laugh 😂

[@Genericytber]

In my entire blading career, I think I can say that I launch way too hard since I always end up breaking my launchers

[@KarosRose]

Beggining of beyblade z: the be has no launcher, it is powered by rocket engines

[@natemajor6560]

*are industrial air compressors

[@-Zagreus-]

So basically jetstream sams sheathe

[@altalt8447]

It’s called a compound gear train and it’s used in bikes, robots and most thing that need to go fast

[@ZedKingsley]

Read the end as “most things that need to be feared”, and was like “what did bikes do!?!”

[@heromedley]

power launchers for gen X gonna be insane

[@Cyanmations.OBJECT]

X=Roman numeral for 10

[@Cyanmations.OBJECT]

Gen 5 launchers are going to be UNBELIEVABLY CRAZY!

[@shortyboio]

I remember removing the stopper from my hasbro metal fight light launchers as a kid. I felt like an engineering wizard from that hack.

[@PilotTed]

I just can't believe beyblade is still alive and kicking... Man, it really takes me back to my childhood.

[@Bola-qd4tx]

Realistically, they would probably make a gear ratio that is all based on torque so when u are ripping the ripcord it's gonna look slow but the beyblade will literally be a f**king WINDTURBINE

[@ethancross2322]

No wonder it has that shield, I’ve never seen one of those move that fast. When I was a kid we just had the boring slow ones that basically just sat in the center for 5 minutes until they ran out juice.

[@robert17282]

I miss old bayblades i had a first gen pegasus and the green lion one

[@pointlessink6084]

Man we used to have those over extended pull tag just to try and make it spin faster 😅

[@bearthedevil9675]

my engineer friend made his own pulleys and put them all in a way to big launcher and his beys would burst before they even dropped, unfortunately i dont have the photos but they are on a engineering reddit somewhere

[@avm1881]

i remember when i was younger with beyblade burst beys i would modify my launchers to remove the stoppers specifically on the ripcord ones

[@isaactelesco2141]

Here's my issue. The gears wouldnt affect anything in spinning the beyblade, beyond the gears in the ripbox. Because the beyblad is attached directly to the launch glear. If you can rip the cord faster, the beyblade spins faster. This gear multiplication only serves to raise the ceiling and lower the floor. The "stopper" changes nothing because its the speed of rotation in the old launchers that released the beyblade if you performed the action properly. Instead of relying on the stopper controlling when the top slips off.

[@xbox_mellow]

The first gear he took out looked like another bayblade

[@HatsuneAmi]

Putting bearings to the launcher might make the spinning more faster as well

[@Hrizonus]

Wait is burst over? I haven’t seen a beyblade since burst started

[@WingsTheRobloxYT]

Yep

[@TheLegendaryR]

Burst ended last year in December in Japan and it's going to end at in December of this year in the US. Burst has been going on for about 7-8 years now, so a lot of people are looking forward to this new generation. I hope you'll enjoy it if you're interested in beyblade or willing to get back into it

[@Hrizonus]

@@TheLegendaryR hell yea finally somethin interesting

[@absolutemaniac7368]

​@@TheLegendaryR thank goodness. I stayed out of beyblade for a long time because I didn't like the "burst" gimmick at all

[@tranquilthecat3417]

I too am concerned about the BBX power creep from launchers.

[@masonperryseabrook1966]

Fun fact: you can modify your hasbro pro series launchers by opening them up and taking out the thing that’s in the middle of the launcher(not the thing that’s holding the gear in place or the gear itself)and remove the burst stopper and put it back togehter and that makes it stronger

[@Chronostra]

Perhaps Moses can split the sea because his launcher is a googol launcher

[@MegaInsaneMC]

So if you replace the part the bey holds onto with the metal fusion ones, then you can have lore accurate beyblade

[@K_Cameron]

I quit beyblade upon the unveiling of burst.. just felt so unappealing to me. But now with X i feel like i wanna try playing again! Looks very cool

[@IllegalXeno]

Can't wait to launch a metal bey with it

[@MishiMIshaniz]

Wont be long until they make a beyblade that actually can split the red sea

[@JSmacks]

These x launchers are stronger than the burst ones for sure

[@xxGamerZxx50]

This gen is already better than burst(in my opinion)

[@Cyphule]

So that's why even after a brutal hit they still keep running. Other beys would disintegrate.

[@kentoturingan706]

It's like a correction tape😂😂

[@thelonewheel4355]

Can you do a strip launcher breakdown "under the hood"

[@multivewer]

Now do it for the string launchers

[@Master_at_play]

You I actually firat heard of gear multiplication from a legobeyz video

[@YeetNation2006]

Cant wait for burst prong mod for X launcher

[@Crimsxn_K1ra]

imagine they made a 10000 RPM launcher

[@Circ00mspice]

Are the launchers more expensive?

[@emmanuellondono1661]

Where can I buy this launcher? I bought the bx-08 set and didn’t come with a launcher

[@Ajainormous]

They made it easier so it won’t click if u look at the rip cord it’s missing 3 teeth at the top of it

[@zrothepangolin]

kinda want one just to modify it to launch mfb

[@jcs2km]

can't wait to get my hands on one of these

[@ryugathestrongest]

I think you need the stopper though

[@stevenn1940]

Beyblade still exists?!?

[@leafgreen845]

Funny spinning tops

[@fraffra97]

Bayblades are still a thing???

[@KofunShitaBenjiro]

mod it to be a burst/metalfusion launcher I DARE YOU 🙂🙂🙂🙂🙂

[@NinjaNakabim]

Oh god. Hasbro is going to shit all over this.

[@jojoisuncomfortable3018]

I can't wait for Hasbro to ruin it

[@robustreardolls]

Ripcords are superior to string launchers

[@MessiahKnight]

This series died with burst

[@KidPhantom23]

That's no fun... your bey already hitting the wall , making it lose some power and spin. You basically gonna lose the match

[@summermermaidstar756]

That's the gimmick of beyblade X, the wall creates the "X Dash" which boosts power as the gears of the bit spin upon the gears of the wall to speed it up.

[@quandalebackbling]

i swear some day beyblade wouldn't even be safe for kids to play with, but rather used as a lethal weapon 😂

[@kentutdiwc8059]

finaly a bey that can break a solid ground just like the anime 💀💀

[@deus1278]

Basically anime metal saga irl

[@cameronmccort6626]

You mean lore accurate

[@joshuapierre2095]

We going into the metal saga with this one

[@TrySomeCG]

Like splitting the ocean perhaps?

[@AD4M.amv.]

this new gen gonna be fire... imagine you have family and see your kid is having the 5th generation of beyblade... thats gonna warm your heart

[@lorddeathofmurdermountain76]

Then you pull out your custom LDrago and body everyone in the room 😂

[@malachiharvey3440]

@@lorddeathofmurdermountain76frrr pull out meteo L dragon and just spin steal. Or twisted tempo and whoop some ahh

[@lorddeathofmurdermountain76]

@@malachiharvey3440 combine the fusion wheel of LDrago Destructor with meteo LDragos performance tip because LDrago destructor has a heavier fusion wheel.

[@matt0ballesteros]

FR haha visited my nephew a couple weeks ago and saw they had the Hasbro stadium and some beys. I didn’t even know beyblade was still a thing. Immediately ordered a TT stadium and am now a couple hundo into my collection hahaha. Really warmed my heart and my credit card hahaha

[@AuraFxs]

It’s only the beginning too, their gonna get stronger😭

[@gamershideout89-ke2vn]

They have to or else it's gonna be history

[@AuraFxs]

@@gamershideout89-ke2vn true

[@notmingbo2642]

Sorry to be that guy, but its "they're".

[@AuraFxs]

@@notmingbo2642 thanks for the correction 🫂

[@774game]

doubt

[@mrgrimm335]

At this rate their gonna need to start making anime size arenas to accommodate the power of these things 💀

[@neonthunder3261]

I would kill for that, battling in the mfb anime stadium was a childhood dream

[@mrgrimm335]

@neonthunder3261 fr,and with how powerful these things are being with just the starting launchers from the new gen i can't wait to see how crazy they get,like the arena barely seems good enough sized for how much power they have

[@neonthunder3261]

@@mrgrimm335 LITERALLY! I might get into X just because it looks like... NUTS honestly. I might start once Driger comes out since idk if I'm feeling some of the newer designs. Can't wait to see how this shapes up! Can't wait for Hasbro to ruin it like they did Burst & Metal Fury (Metal fury hurts me, especially since I was 7 when it happened or smth. Just net savvy enough to know it was a scam)

[@mrgrimm335]

@neonthunder3261 no kidding,how anyone greenlit any of hasbros shameless cash grabbing is beyond me,I haven't been the biggest fan of x designs for the most part so far as I think their a bit bland,but I can't wait for the future of this new generation

[@neonthunder3261]

@@mrgrimm335 Yea the designs are bland, maybe not as bad as burst's, but hey it's back! Reminds me a bit of the HMS system from G-Rev

[@marcynados]

A stronger launcher and a rubber flat gonna make a hole in the stadium

[@vortexgg509]

Forget rubber flat, imagine metal sharp

[@edi1499]

NOOO, I have broken 3 stadiums with burst and medal attack beys 😢, it’s very annoying

[@korosan07]

​@vortexgg509 boutta dig a hole in your house

[@Neximatez210]

@@vortexgg509That’s gonna destroy the already screwed up Beyblade meta 💀

[@NeoAxiom]

@@vortexgg509with q145

[@st4pps]

at some point their just gonna take notes from battle strikers and have a launcher powered by 5 D batteries.

[@nicholaiseay1650]

They tried something similar in mfb but it didn't go to well

[@st4pps]

@@nicholaiseay1650 when?

[@cafekid4663]

​@@st4ppsmetal generation beyblades aka 2nd gen

[@xBIGGIx]

As a kid I had taken apart my Metal Fusion launcher and accidentally taken out the stopper which made my Beys launch harder (I would also yank the hell out of the ripcord) and on top of that I managed to turn my Rock Leone into an attack type Bey cause when I first got it I launched it onto smooth concrete that slightly flattened the WB tip. The combo made my Leone unstoppable.

[@samcrdx8016]

I moded this years ago on my MF ripcord launchers by removing that white stopper which prevents the launcher prongs from free spinning. Finally TT figured out that it provides much better power delivery.

[@unknown_username0101]

Same, except I did it for burst light launchers

[@clonerstive]

They didn't figure it out. They just decided the players were old enough to handle the increased danger now and not get sued xD

[@jacknevilson7690]

imagine using that launcher with 4d metal fight beyblade 🤣🤣 somebody gonna get bruises

[@a.asolus7564]

Can’t wait until TT makes a long ripcord, I’m gonna go ham

[@wilkinsfeliciano4103]

I remember when bayblades wouldn’t pop out into tiny little pieces and where just hunks of metal

[@chuck2998]

I remember when the only part of a beyblade that was metal was the weight disc. When beyblades exploded, it was legendary

[@FloofyOneTorpheus]

It's literally the OG launchers... BEFORE METAL! I'm shocked how many people were born in 2000 who don't know that

[@cameronwindelspecht8839]

When I was a kid my broyhers and I would launch Bayblades at each other on a trampoline. I can only imagine how much more they would hurt nowadays lol.

[@XACE_BLADER]

*Nah they gonna make an RPM Launcher soon* 💀💀💀

[@kennythetrend3688]

Beyblade X Toys themselves might be the BEST EVER. But the anime so far looks boring and dull to me. So far it's just Beyblade Burst Season 1, but with less vibrant colors. That might seem unfair to say, but I just HATE how they kept the same animation that Burst had.

[@SubOptimal_]

They were serious about them saying they want adults to get back into beys too, from going back to metal parts and having these things spin so fast. Thought i cut my finger trying to stop a spinning hellscythe the other day. Hope beyblade community gets big here in the west too.

[@solafyodr6837]

👀 pretty sure that exact same beyblade is the one that gave me my finger cut today... on the back of my finger. 😶

[@brewski0277]

Back in my day we didn’t need any second gear we just learned how to pull harder, idk if they still make metal ones but I had a few and I loved using them on the playground, the ground would chew up the bottom piece tho

[@chuck2998]

Nothing like yanking the finger loop clean off the ripcord. Miss those days

[@brewski0277]

@@chuck2998 I never had that issue, I can’t remember if I’ve seen that or not either, was so long ago

[@chuck2998]

@@brewski0277 there isn't any teeth on a small section near the pull end of the rip cord, resulting in a thinner cord in that span, leaving it susceptible to bending and twisting. Especially if you pull crooked like I would trying to do the anime trick launches

[@brewski0277]

@@chuck2998, I didn’t watch the anime but u did pull it for power, I didn’t do it super often either so that helps

[@WingsTheRobloxYT]

Now I wait for my package of a launcher to turn it into a launcher for burst

[@C9BER]

strongest light launcher in history

[@red.hood.wonder]

Are they compatible with any old beys?

[@brokenswitchpowerbutton]

No, but you may be able to mod it and use the prongs from older gens

[@TheEnderPearl]

Ez mod tho

[@X_bladers]

No, but you can copy the mechanism or modify it to launch metal or burst beys

[@ra6o]

The launcher is best, surely best ripcord launcher

[@redbunn2282]

Stronger launcher with more spins is nice is just im curious how long the launcher can last before its completely wear down

[@shadystuff673]

They’re creating weapons soon the next nuke will be a giant saw blade powered by a spinner that’s powered by nuclear fission Wait a damn minute I’m doing something here…

[@GEFMFost]

Oh my god, this beyblade shit is getting fucking insane.

[@NaJk93]

Honestly. 3D printing people should do Bayblade tournaments. You have to make them from scratch yourself (the bayblade on the launcher)

[@shanehyatt7205]

Yeah I tried to catch one barefoot after it shot out of the arena. I wouldn’t advise doing that, definitely wear shoes. Extremely fun though!

[@asiburger]

There are grown adults still stuck on beyblades??? I get Pokemon, Minecraft and LEGOs. They all have a soul to them, but looking at the cash grab that beyblades were, I can't fathom how they are still around.

[@justicetaylor3050]

Not as wild as the Bayblade anime. That show would bring in the freaking Bayblade Air force or go Holy and part the Red Sea for Mosses.

[@zakxura3948]

Back in the day when I was young and V force was meta I remember taking apart my launcher and made one spin super fast by taking the stopper out

[@zorancuga1236]

Beyblaade x season 10 launcher Spins beyblades at mach 4 speed and brakes the sound barrier with every spin

[@gjgjgtcgj]

It would be awesome if along the way they make the launchers with built in gear boxes so you could choose the gear ratios and get a consistent launch power depending on your strategy.

[@navywolf2466]

90s kid here. Had a modified launcher, made an extended rip cord, and had a few beyblades that could handle most situations 🤣

[@RealAgent13]

Gear ratio big gear spins lil gear fast easy science

[@silversabercraft]

Ill stick with my old metal fusion gear and custom steel slash launcher It made Aquarius cut through a metal pole, so that's why I called it that... look at his metal disc and you would see why that's a feat of its own

[@r4z0r84]

I remember getting a real one that was made of metal back in 2000 it was unbeatable as every other kid had fake plastic ones and now theyre all plastic 😂

[@itzronobi4805]

What brand of beyblades do people recommend buying

[@darknesshas1]

I'd rather the burst mechanic change so it doesn't explode before you can drop the thing

[@shadow-san17]

Ya’ll need a special launcher to get that power? I get just as much power from a normal one.

[@odinhutson4229]

I just dont like that they went to plastic gen styled beyblades, imma stick with my metal fusion and god series

[@eric_t123]

the gearwork reminds me of the mechanic papa launchers

[@ATable4You]

Also the red ring on the track is made in a way to catch the beyblade and launch it even faster into the center of the ring. Hence the reason why you have that nub/notch that points towards the center.

[@razielcroft-mo8ll]

Yeah but if the bay starts hitting the walls won't it lose momentum do to friction....

[@jalengoode3266]

I used to mod my old launchers so they wouldn’t stop lol That and I could launch them spinning left

[@Draxxas2006]

Wait the prongs are the same as the metal gen ones. Any of yall know if they would work on the metal beys?

[@super-social-saltyfish]

200g beyblade otw

[@My1xT]

I ak surprised about the no stopper thing as the stopper iircbwas there to fully ensure the bey gets out.

[@buder5116]

i was stripping the rope puller thing has a kid can't imagine how much i would rip the new with that multiplication causing more tension on it lol

[@irishstew9951]

Just so you all know yes more gears more power but also more gears normally ends with more problems too

[@Redbaron.START14-BRD]

I remember modding fake launcher so they wont stop and it was op as hell

[@yusheitslv100]

Imagine modding one of these for plastic, mfb, or burst

[@fraffra97]

I had a friend that sharpened the metal ring of them and school banned them because it cut a friend

[@takius3108]

When are we gonna have monsters coming out of beyblades ?

[@AB-cd5gd]

Is it stronger than DB launcher from burst pls

[@killunova]

I love the new ripcord launchers they are so nice

[@seighartmercury]

Use this on those old, heavy beyblades and you've got a weapon