How Boat Controls Are Connected To An Outboard.

[@throttlefamily4655]

This is a great video no back and forth straight to the point and educational

[@Noahlochner0]

Thanks! For a video I made pretty spontaneously while sitting at the boat ramp, people seem to always watch it. Glad people find it useful. 🤘 check out the most recent vid I did of my home built jet boat!

[@smedleybutler1969]

Best video ever,I took my boat apart 4 years ago and I forgot how to put it back,Thank You!

[@chauvinsgarage1515]

Finally a Quality video that answers my questions on how the running gear is attached to an older Johnson outboard that formerly was a tiller set up. Great video

[@Noahlochner0]

Glad this video has helped people

[@JulioBaca-lo1wf]

Somebody had to show an easy and perfect illustration concerning this mistary ❤

[@Noahlochner0]

To be completely honest I filmed this spur of the moment but I’m so happy it’s reached so many people.

[@ggwoutdoors2a]

I'm doing a similar setup with a Rude 18hp and same console. Really helped seeing the cable connections to the motor.

[@stevencartlidge6574]

Great information. I just picked up an old boat that was stick steering and all that stuff was removed. But has the same motor on it. Now I see how easy it will be to reconnect it to how it came from the factory.

[@Noahlochner0]

I’m really glad this video has been useful for people.

[@Harrell423]

Such amazing information!!! Thank you so much!!

[@tuyendang2022]

Good video bro.. it’s help me out a lot. Ty brother…!!!!…

[@tuyendang2022]

It’s a good video bro. It’s help me out a lot. Ty brother…!!!!…

[@Noahlochner0]

Glad it helped! I have a ton of video I need to go through and post more content of my current project.

[@Simon-nd9qd]

Perfect, thanks man🤘🏻👌😎🤗

[@jpascaln]

This does help. Thanks

[@HEROFOREVER]

Great video!!

[@TylerGagnon97]

Thanks for the video! I have a 59’ Johnson 35hp with the exact same shifter. Do you happen to have a video or know where I can find one of how to wire the ignition? I hooked mine up the the battery and the motor and it doesn’t do anything and I want to make sure it is hooked up correctly.

[@Noahlochner0]

Search Dangar marine on KZbin I know he has one.

[@Noahlochner0]

There’s also a channel called Brandon’s garage and I know he has one too. kzbin.info/www/bejne/qmjQk5anh8iGpqMsi=Qhe3-0UpRf5ZrvrL

[@sbblaze]

Any good links for the cable connectors

[@MarkTarquini]

Do you have a picture or video of your dual-handle remote control disassembled so you can see how the cables connect inside?

[@Noahlochner0]

I don’t unfortunately, but I bet if you searched boat control install or something you would find something on how they’re installed. Dangar marine on KZbin has all sorts of videos on boat stuff.

[@MarkTarquini]

@@Noahlochner0 thanks I'll check that out. I realized today I can probably find a new single handle style that would work and be better anyway.

[@shanepeter1616]

Where can you get that throttle cable, gear cable, and steering cable? I have a 14' MirroCraft that has an 85 Johnson 25HP tiller control pull start motor. I don't mind the pull start, but due to back issues, I want to build a console and be able to run the boat from that.

[@Noahlochner0]

You can order universal shift and throttle cables and then order the ends that are specific to Evinrude/Johnson (they’re the same) or you can order cables that are specific for your motor. Either way works. And the teleflex steering cable, I’ve always gone with the seastar ones. Super good reputable company and the instructions are clear. I’ll add links in the description for parts to make all this happen.

[@shanepeter1616]

@@Noahlochner0 thank you so much. I appreciate the help.

[@Noahlochner0]

Links should be in the description now. Hope that helps! Just measure what length of cable you need. Measuring directions should also be on seastar’s website in that link.

[@abcdonkeys]

Thank you. Nice helpful advice

[@beefhouseG]

I think I have that exact same shifter… how did you hook up the cables in there? Existing was just inner cables (wire) my new cables have the eyes on them like yours… do you somehow take that off to expose just the wire? Needing help

[@Noahlochner0]

It was quite a few years ago that I messed Around with it. But if I recall correctly there was a round little cylinder shaped end piece with a hold through it that you threat the end of the cable into and it’s held captive inside the lever “box” part. As you move the lever it pushes or pulls the cable. DM me on Instagram if you want and I can try to explain it better with photos. @Northern.arc.designs You can also check out my most recent boat project there.

[@beefhouseG]

@@Noahlochner0 yeah I don’t have Instagram or Facebook or anything really lol. I’m wondering if my cables are wrong… they look like yours with the holes in them to connect to the motor… but they have holes on the other end too, but that’s where it goes into the control box, but looks like you have to put wire in there… so I’m not sure

[@Noahlochner0]

@@beefhouseG kzbin.info/www/bejne/bXjHqJyIht14qqc. Hope this helps!

[@jamienkelley]

I wish the piece on the end was threaded on....it's actually held on by the Silver pin at that that silver clip is attached to and it's pressed on.

[@tylergagnon6371]

Anyone have a link for the cable brackets? Can’t seem to find a listing anywhere.

[@stevenfielder0912]

The tiller handle is still attached im currently upgrading mine and was told all that had to come off

[@Noahlochner0]

Mine still had the tiller handle and worked just fine.

[@Noahlochner0]

My buddies has the tiller handle still on his also. But it may depend on what brand motor you have. We both have evinrude/Johnson