How did I NOT know about this?!?! (Jig painting game changer)

Like most everything else I had no idea these things existed, big thanks to youtube creator Jay Siemens for his video highlighting the process:
• Custom Made Lures For ...
Link to Mark Rober video:
• Liquid Sand Hot Tub- F...
Link to fluid bed options (not affiliated) (ebay link may not be current):
www.ebay.com/s...
Link to my video on rechargeable minnow aerator:
• Rechargeable Live Bait...

[@TheNeverendingProjectsList]

Another great video. It made me rethink using the air compressor for these... the fish pump worked so much better. Think I'm stopping at the store on the way home to get one for my setup.

[@RevampedOutdoors]

Alot more peaceful too lol, way less noise!

[@pauleyedwin6056]

Way too much air in my opinion but I see you figured that out. Good video.

[@loranbenoit2916]

After you add the initial color, have a second color ready and you can use a small brush to add a second color.

[@fishmandan]

1) get a cheap toaster oven heat the jigs to 300 degrees. 2) Dip the jigs for color 1. 3) Use a paint brush to sprinkle colors number 2 and three from another jar. Do not let brush touch the jig. 4) Heat in oven for 20 minutes to cook on colors. 5(place stick on eyes. 6) Dip in Lacquer and there you go. Firetiger is a 4 color jig.

[@richardhudson7206]

Sally Hanson tough as nails clear finger nail polish works as a good sealer and you can pick it up for cheap at a dollar store. $1 a bottle here in Indianapolis.

[@RevampedOutdoors]

True, I first started using that on fly fishing flies, works great!

[@jdoboy6835]

I read most of the comments but didn't see the answers? #1) How long does it take to dry 'em,,,, like your hanging them on the rack? #2) do you throw them into an oven after they touch dry? Does it help the hardness? #3) About, how many jigs can you do with that amount of powderpaint? Say 500 out of that small canister? I'm also thinking or coating cast bullets & wondering how long it will take to do a 1,000,, & how much powder i need to buy? THANKS,,,,, For a very good to-the-point video! OBTW,,,, I fish. So would a 'BABY BUBBLER' from Wallworld work? Just put the air stone defuser inside of the powder coat container? SIMPLE.

[@RevampedOutdoors]

1. As they cool they set up. So maybe 1 or 2 mins. 2. You can harden them further with another cycle at 350 for 10 minutes. 3. Alot with the small tubs, I would say easily over 100 per container depending on size. Small jigs 1/32 or smaller would be 150+. I run cast with my pistols. This stuff coats decently thick. I haven't tried to coat any casts yet. Depending on grain weight I think you would need to order the bigger jars online I think they have some larger sizes. But I would definitely run tests on the coating first to make sure it works for that application. The baby bubbler could work as long as you had a good paper medium to make the filters out of to get an even bubble.

[@elkbow]

I use a needle nose, grip the eyelet, heat on stove open flames, dip. No paint in eyelet, more consistent, no burning out the cheap Chinese heat guns.

[@RevampedOutdoors]

Nice! I don't know if I trust myself with heat control with open flame lol

[@elkbow]

@@RevampedOutdoors simple, I just count depending on the size, it varies

[@JackStolz]

That powder paint is really cool

[@RevampedOutdoors]

It really makes life a lot easier, hand painting each is a pain. I could see setting up a bunch of these to try two tones but powder paint is da way.

[@markpearcey-ph5nh]

Yep, you definitely need a lower output pump.

[@Bigg_Driver]

Big thumbs up...nice arbor press on the table. Do you have any dogs?

[@RevampedOutdoors]

Yeah it's pretty sweet, no dogs just two dummies.

[@jeffalden6769]

Whenever you use the dip method put the lit on and bang it upsidedown on the table. Flip open and the paints fluffed.

[@RevampedOutdoors]

Nice, thanks for the tip!

[@JackStolz]

Woah fishing b-roll!

[@RevampedOutdoors]

I know right?! He puts in some serious effort, way more than me lol

[@JackStolz]

@@RevampedOutdoors I checked him out and WOWSERS

[@fatboifishing]

Looks like someone put the cup into the holder without the top on the cup 😂 paint goes everywhere lol

[@RevampedOutdoors]

Too much air when using the airbrush compressor lol

[@christopherhobby8391]

What is the purpose of a fluid bed setup? Im new at this. Thanks.

[@RevampedOutdoors]

It adds air to the powder paint and makes it act like a fluid so when you dip something into it it conforms to the outdoor shape of the item. If it was just powder you can't get down far enough to surround the whole surface.

[@fishing-tools]

the dust has it flying far..everywhere..as a rule you can see it with uv light

[@Bigg_Driver]

Just ordered a my pillow dog bed. Maybe you could do a review of it,, if you had some dogs they might appreciate it. Since you dont it would be for any future pup you might get

[@RevampedOutdoors]

I'm good on the dog bed reviews, there are some great dog training channels that might look into it though. Donna Hill, or Zak George would be all over that click bait right now.

[@braxtonsmith3892]

Look a lot like bfishn h2o precision jigs. 👍

[@RevampedOutdoors]

Right on, didn't even know that those things existed, I got a little cut out on the back side for a soft plastic but definitely similar. Nothing new under the sun they say lol.

[@braxtonsmith3892]

@@RevampedOutdoors they look sweet. Pretty much anything they isn’t just a round jig head is the tops in my book. Idk why but when I use something 1) a little more narrow profile, say a vmc moon eye. 2) or a more oval style type head.. . I catch more fish. Have a bunch unpainted I’ve been like 🤔 do I had paint and epoxy since I also build rods and have epoxy around, or do I just powder a few and get out and test the durability? No idea where to even get started. Today is my first day of considering the powder coat technique.

[@RevampedOutdoors]

@@braxtonsmith3892 sorry for the late reply I just now saw the question. If you're anything like me you've tried both already. But. What I would say about the powder is it's durable without the cure about the same as paint, with a cure it's "chip hardened" by that I mean it will take a beating until a small portion chips off. Not baked it will act like nail polish, with 10 minutes at 350F it will be hardened and take a lot more abuse. Nothing is perfect though if you hit a bridge piling it will chip off but running over gravel or cobble it holds up pretty darn good. I hope this helps and wasn't too late! Thanks for the comment!

[@andrewsteuart2438]

How did you get or make that tube that the air goes into?

[@RevampedOutdoors]

The clear tube? That's just a standard aquarium tubing/hose you can pick that up anywhere fish tank supplies are sold, big box stores hardware store etc.

[@andrewsteuart2438]

Okay, I figured and ended up finding one, and I found a valve made for aquarium pumps too. Got it all assembled and tested, just waiting for more paint to arrive. I'm painting 4inch long jigs, so I needed alot of powder to fill the tube.

[@BStavFishing]

Gotta turn your air pump down.

[@RevampedOutdoors]

Yeah the air brush pump was a bit much, aquarium pump works a lot better now.

[@BStavFishing]

@@RevampedOutdoors cool. I know I’m late to the party. Good video. Keep them coming!

[@fishing-tools]

turn off the light and turn on a uv lamp...

[@RevampedOutdoors]

I have a couple of the glow colors. That would be a good thing to show!

[@imtack91]

why arent you just 3d printing these?

[@RevampedOutdoors]

I did have some versions designed that worked ok. But for the time and effort the PVC parts are quicker to piece together.

[@kamsharps]

Mask doesn't do much with a beard

[@RevampedOutdoors]

True, but it does more than nothing.

[@RevampedOutdoors]

This is also why I built my own "fume hood" rather have a beard and do stuff then forced to shave it for OSHA compliance when I'm not a business.

[@BOURNE354]

another of waste in the air ,it needs to be dialed back I do 8oz jigs and nowhere near your mess