How Do I Stitch with Metallic Thread?

[@christophernejman]

We were hoping you would actually be sewing with your suggestions in this video to prove you do not get thread breaks with your setup way. We always set our spool of metallic threads in a vertical position so they feed from the side of the spool. We have found this successful in any brand of metallic thread. Always great to see you, Reba.

[@lilastageberg6355]

I have been sewing for most of my 69 years and this little program taught me a handful of things I did not know! Never had the idea to change thread spool from horizontal to vertical (using thread stand and I even have one!) or to use a thread net. I made a picture quilt for my husband's 100th birthday party. I used metallic thread to put a Bible quote on it and after using the metallic thread I wanted to scratch my own eyes out. What a blessing it would have been to know that putting a sister-thread of nylon along with the mylar would have kept it from snapping every 11-12 inches! I will be watching more of these because I love to learn and this gal knows her stuff.

[@QualitySewingWA]

Thank you for watching. We are happy to hear that this was useful information. It sounds like your quilt was beautiful and now you can make one with a bit less stress. Happy Sewing!

[@DD-ek8qc]

Thanks for all the tips. I've been sewing for the majority of my 73 years and embroidering for probably over 35 years. With the speed of our machines these days I've also learned to slow the speed down also. All of your tips are fantastic for newbies and anyone with frustrations.

[@QualitySewingWA]

We are happy to hear that you find our videos helpful. Thank you for watching! We love helping people along their sewing journey.

[@patriciastephenson1945]

I hadn’t realised that the threads on the reels were wound many different ways. After watching your tutorial as to the placement of the thread, and the winding technique used in manufacturing, I’m now a happy 😆 metallic machinist 😅. Also, I had the correct attachment for using the metallic thread, but didn’t know what it was for until you explained that it was for horizontal feed. Thank you, thank you.

[@QualitySewingWA]

We are happy to hear the tips we shared were helpful. Thanks for watching & Happy Sewing!

[@belfastbunny]

First time I have seen metallic threads being explained. Most comments on metallic thread are usually “don’t go there”. I knew about cross versus straight wound spools but didn’t realise the impact was magnified on metallic thread. I am now ready to give metallic thread a go rather than avoiding. Thank you 😊

[@QualitySewingWA]

Metallic thread can be really fun to sew with. We hope you enjoy it as much as we do!

[@SaraPurvey]

lol.... I'm so glad you explained to not cut the thread net. I'm one of those who wanted double for my money!! I'll try it your way now. I, too, put the metallic thread way across the room and put it in several stands! I never knew about the different ways threads are wound. Hubby was watching it the other day when I kept having thread breaks while doing FSL ornaments. He commented on how one spool was doing different than the other ones. I enjoy your videos.

[@QualitySewingWA]

We are happy to hear this video helped you! We have a whole series of fun sewing tips. We hope you find value in them. Happy Sewing!

[@SaraPurvey]

@@QualitySewingWA I've watched a number of them already! I enjoy Reva. She's so real!!

[@c.christman9649]

I will definitely be ordering a stash of those in Christmas Metallics!!

[@QualitySewingWA]

They are beautiful and really fun to sew with. We hope you enjoy them as much as we do!

[@joannyork-gilmore1264]

Thank you for all the great information about metallic threads!

[@QualitySewingWA]

You're welcome. Thank you for watching.

[@williamtaylor2412]

thank you

[@QualitySewingWA]

You're welcome. Thanks for watching.

[@ritabureman1689]

THANKS FOR SHARING THIS INFO.

[@QualitySewingWA]

You are welcome. Thank you for joining us.

[@asimeral]

Really nice video! Thank you so much. I feel much more likely to try again with Metallica.

[@QualitySewingWA]

We are happy our video helped you build confidence. If you have questions on the best needle to use with your thread give our team a call, we are always happy to help! 1-800-687-5175

[@patsorbello7440]

Excellent information, great instructor

[@QualitySewingWA]

Thank you!

[@sandan2358]

I love metallic thread. I use gold on QOV’s. Using a thread conditioner on the thread helps prevent broken thread in dry or low humidity areas.

[@QualitySewingWA]

That is a great tip! Thanks for watching & sharing with us.

[@michellerassie4224]

Love your videos

[@QualitySewingWA]

Thank you for watching. We appreciate your support.

[@mischad4838]

Fantastic!!!!!

[@QualitySewingWA]

Thanks for watching! Glad you enjoyed it.

[@c.christman9649]

Where does the tile Christmas scene come from? It’s beautiful with the metallic threads!

[@QualitySewingWA]

That is a tiling scene from Anita Goodesign called Santa's Ride.

[@c.christman9649]

@@QualitySewingWA Thank you!

[@QualitySewingWA]

@@c.christman9649 You're welcome.

[@Weiskat53]

Hello. I am new to sewing and/or top stitching quilts with metallic threads. I have learned so much from you. I have also watched several videos regarding using metallic threads and they were not as informative. One question I have is what type of thread do you use in the bobbin? I've tried winding the flat metallic thread on one and it was a disaster. Any advice is greatly appreciated. Thank you

[@QualitySewingWA]

We applaud you for finishing your quilts with metallic thread. Very fancy! If you are working with a finished quilt, consider one of two options for the bobbin thread. One - match the bobbin with the same thread as you are using on the top. Two - coordinate the bobbin with thread that is the same color as the metallic. Polyester embroidery thread comes in a lot of colors and would work well. As to the "flat metallic thread", typically these are mylar. Very pretty but can be quite temperamental. This would not be my first suggestion for bobbin thread. Metallic in general, when stitching out stitches with metallic threads on a fabric where the back will not show in the finished project, just use bobbin thread (even pre-wound bobbins) as you would for machine embroidery.

[@ilenemartin5330]

This video is so information! Thank you so much! Can I use the metallic threads in my Baby Lock Gallant for free motion quilting?

[@QualitySewingWA]

Yes, absolutely!

[@beatricedorsett]

I'm watching you from the Kamiah, ID. Is there anything special that should be done when using a multi-needle embroidery machine?

[@QualitySewingWA]

This question really depends on the machine and the brand of thread. Always is good to use a metallic needle and you may want to slow the speed down and possibly use a thread net. Happy Sewing!

[@Ghostly-t4y]

Hi, any tips on hand embroidering metal thread? Special needle? TY

[@QualitySewingWA]

We don't have any great tips to share for hand embroidery as we focus on our passion, machine embroidery.

[@nanahathaway6728]

What brand is your horizontal thread spool and where can I get one? Great tips!

[@QualitySewingWA]

Here is a great thread stand that will let you position it horizontal or vertical as needed www.qualitysewing.com/superior-thread-holder-and-stand.html

[@kenhathaway2788]

Had to watch your video again and saw you actually call it a thread director! So googled that and found it on eBay! Odd that your store doesn’t sell these???

[@QualitySewingWA]

@@kenhathaway2788 We do sell a thread director. The one we carry can be used vertically or horizontally as Reva demonstrated. It is called a stand not a director but it does what she was talking about. You can find it here www.qualitysewing.com/superior-thread-holder-and-stand.html

[@joannestoddart3918]

What machine are you using please?

[@QualitySewingWA]

Reva is sewing on the Pfaff Creative Icon 2. www.qualitysewing.com/pfaff-creative-icon-2.html

[@michellerassie4224]

How to use king star thread

[@QualitySewingWA]

If you have specific questions give our online team a call. We are happy to help answer your questions 1-800-687-5175

[@clarencesmith130]

The bobbin would have the same glitter thread?

[@QualitySewingWA]

The bobbin is usually a standard thread.

[@clarencesmith130]

I want to use glitter thread same principle?

[@QualitySewingWA]

Same principal but depending on what your thread is made out of you might need to change the size of your needle.

[@joannestoddart3918]

I own a Pfaff 720 can I get the thread riser Guide

[@QualitySewingWA]

Yes, the thread stands can be used with any machine.

[@dcwatashi]

I just have one tiny little suggestion lol, you may want to oil your chair 😎😎😊👍🏻😀 Otherwise, very nice presentation