How do we restoration a trunnion shaft | Handemade tools | Amazing Technique |

[@Владимир-ф4п3ы]

Классно ребята работают. Станок у токаря, в идеале. Видно, что человек следит за ним.

[@jimmartin9440]

Hello from, San Francisco, California. The most amazing job, well done.

[@del-lar7370]

ESSA EQUIPE DE MECANICOS,TORNEIROS,AJUSTADORES SÃO FODÕES MESMOS!!!!! DEMAIS,UM MILHÃO DE LIKES !!!

[@shakoorkhanmohmand9193]

kzbin.info/door/5Wg0ecBh2p9M6pMRtOMojQ

[@Vincenzo_F]

*_Without power tools?_** That's right, that's a farts-powered lathe!* ❤ 👍🏻👍🏻

[@amazingthingtechnology1595]

❤️

[@ronblack7870]

wait they skipped something. one minute the shaft is too small and the next minute it has been welded and machined and they are hammering it on.

[@davidpieratt]

I thought the same. Lathe a little it's done. Fake if you ask me.

[@hamidmehmood5219]

Excellent

[@michaelbedell6523]

I never get bored watching what can be accomplished with so little. Even though I would not come across to do this, it’s insightful on using similar techniques to apply to other endeavors. I always see the pride of each in what they do.

[@horstmuller7512]

"Cleanliness" is not a word in their vocabulary of pride.

[@billyproudfoot3763]

Lời hát của Đức Phúc nghe rất là nhẹ nhàng luôn.

[@amazingtechnologyprocess2476]

Nic khan g

[@ЮрийКовригин-х2в]

👍👍👍молодцы!

[@shakoorkhanmohmand9193]

kzbin.info/door/5Wg0ecBh2p9M6pMRtOMojQ

[@DiscoveringSkillsOfficial512]

Good work bhai👍

[@wasyl5790]

you are the champions

[@gersoncosta7104]

Top...like do Brasil.

[@fredflintstoner596]

Mrs Richards: "I paid for a room with a view !" Basil: (pointing to the lovely view) "That is Torquay, Madam." Mrs Richards: "It's not good enough!" Basil: "May I ask what you were expecting to see out of a Torquay hotel bedroom window? Sydney Opera House, perhaps? the Hanging Gardens of Babylon? Herds of wildebeest sweeping majestically past?..." Mrs Richards: "Don't be silly! I expect to be able to see the sea!" Basil: "You can see the sea, it's over there between the land and the sky." Mrs Richards: "I'm not satisfied. But I shall stay. But I expect a reduction." Basil: "Why?! Because Krakatoa's not erupting at the moment ?

[@trisnomechanic6985]

Nice video👍👍👍❤👈🤝🏻🙏🏼

[@workinprogress3942]

You guys need to either build a press or buy one.

[@georgegonzalez2476]

This must be the Cadillac dealership: They use workstands, calipers and a touch of fresh oil. Pretty adequate work!

[@iuigipalumbo7857]

,,,,

[@rjcamp1967]

Did you see that they brazed the cutting tip on!

[@lawrencewillard6370]

Good thumbs up!!!.

[@diyinventive]

good work

[@rescuemehanicalthing]

Nice job and good work.

[@patverum9051]

Machined both ends longer ,after assembly turns out it wasn't needed because now there's a gap between shaft and casting. Nice strees raisers btw.

[@amazingthingofficial2923]

Nic 👍👍👍👍👍

[@ПареньизНью-Йорка]

Super good.

[@ya420l4]

That welder is something else tho lol

[@agussugandi3093]

Kerja group yg baik

[@yuriypetrushin2670]

Хорошо

[@유체이탈영혼세계]

나이스 하네요 😆

[@aydinali5381]

2:34 He use powertool

[@dimapool7674]

Мужик в очках и бороде на профессора похож. Удачи.

[@borisboris7856]

Походу там одни профессора работают а академики им ключи подают и железяки неподъёмные таскают.

[@amazingthingofficial2923]

Hard work

[@borisboris7856]

Походу мужики порожняком гоняют машинки, вот оси балансиров и не выдерживают.

[@peterisaloftpc4093]

👍👍😊😊

[@jamesstanley3513]

Laying weld beads on the shaft to take up clearances, lol yeah thats going last. Quality work is option or extra charge.

[@shakoorkhanmohmand9193]

kzbin.info/door/5Wg0ecBh2p9M6pMRtOMojQ

[@54suburban5]

So the lathe is not a power tool😕??????

[@deancappetta1631]

I saw him using a grinder that's a power tool

[@rescuemehanicalthing]

I like it

[@chonrawat7888]

Fc Thailand

[@agussugandi3093]

You is god work no safety

[@ezequielsilva2709]

Muito bom 👏👏

[@shakoorkhanmohmand9193]

kzbin.info/door/5Wg0ecBh2p9M6pMRtOMojQ

[@job38four10]

Good job even though I dont know what a trunnion shaft is for..... But @ 11:37 you put housing on, no weld beads on shaft, then @11:52 while using the arm strong press, the lower part of housing is going over what looks like weld beads on shaft, ye, no, optical illusion......... then I dont even know what a trunnion shaft is for.....

[@geoffcrumblin9850]

This is bush mechanics at best. It's not engineering, but it's about getting a result, until next time it returns.

[@roundedges2]

How it got broken?

[@diyinventive]

😍😍

[@kuaiada53]

É gratificante assistir o trabalho desses homens!

[@bagpuss121]

Restoration ?

[@ROADKILL4147]

not bad other then it wasn't flush and thought the two end pieces would of got cleaned :O

[@josebermudezleon9642]

En cuanto a herramienta se refiere no llegan a tener ni lo básico. No entiendo como pueden salir bien este tipo de reparaciones.

[@molotovbikes4266]

11.37 =)))

[@dangoodine5676]

They cobble it. That's how.lol

[@vladimirmonteza2040]

Jesús los ama de verdad y el ya viene busquenle

[@sellier-bellot22]

It would be good to wear safety shoes in such work !!!

[@javiercarr5241]

I would be but they do what they can. One thing is for sure they are very careful, from all the videos I have watched I have not seen anyone missing a toe or finger not even a big scar. So they must be doing something right.

[@horstmuller7512]

They all are wearing safety sandals and safety pyjamas. So what?

[@sellier-bellot22]

@@horstmuller7512 I thought of their best interests !!! 🤔🤔🤔

[@horstmuller7512]

@@sellier-bellot22 Look at the piles of dirt where they work (and live). Their problems begins in their heads and not on their feets.

[@vipatkovapee7318]

👍👍👍👍👍👍

[@Mr131alex]

супер оператор как надоела такая съёмка писец б л я

[@nicorobinrobin7439]

Palpak,!! Something wrong

[@bobcat2378]

No power tools????????????????????????????????????

[@ivantinipollon6214]

Não usa nada de IPI

[@madsmycrotch6889]

No safety glasses sandals and linen clothes.

[@Dec38105]

who cares...yawn

[@peterparsons7141]

Really foolish sound effect. The title has nothing to do with the video, and doesn’t make sense,. The video could explain some work, and tell about truck repair. The video doesn’t do that, this videos shows some one the work, and then randomly speeds up and slows down, with weird sound effects so it difficult to understand what the workers are doing.

[@ilyasladok6288]

Ох уж эти индусы )

[@MrGeorgin007]

Особенно если учесть что это пакистан.

[@ilyasladok6288]

@@MrGeorgin007 ох уж эти Пакистанцы))

[@francoisleroux5562]

Va

[@rescuemehanicalthing]

No power tools totally hand made work

[@paulb8186]

Are you joking? Lathe, electric drill press, gas, jack etc.!

[@CashensPowerwashing]

@@paulb8186 the video meant "no hand tools" lol