How does HHO kit work - HHO kit - Water to Fuel converter 🤔

How does the HHO kit work - HHO kit HS 4000 shown how it works 🤔
Find the product: 👉 www.hydroxsyst... 👈
Buy #HHOGENERATOR HS 4000 #DRYCELL WITH13 PLATES 100% INOX.
INSTALL #HHOKIT in your vehicle and START SAVING FUEL and MONEY
How to assemble the HHO kit? - Simple explanation!
Buy 👉HHO GENERATOR HS 4000 DRY CELL KIT MADE OF INOX 316L
HHO generator used in cars can save you fuel and money
🤙 www.hydroxsyst...
🤙 / hydroxsystems
/ hydroxsystems
/ hydroxsystems
/ hydroxsystems
In this video, we show the main principle of the operation of the #HHO kit.
The produced #HHO gas from the #HHO KIT is acting as additional fuel to the usual air-fuel mixture in any engine.
Ones the (H) Hydrogen is fuel and secondary, the (O) Oxygen is helping the burning process.
HHO is the chemical abbreviation of Oxy-hydrogen. #HHO gas has two molecules of Hydrogen and one molecule of Oxygen.
When we add #HHO to a regular internal combustion engine, we practically enrich the air-fuel mixture with HHO, which is beneficial for any Internal Combustion Engine. Enriching the air-fuel mixture makes fossil fuel burn more efficiently and complete, which releases more mechanical power, of course.
The #HHO kit needs two things to start operation: electrical power and electrolyte.
Power 12-14.4V DC we take from the charging system of your vehicle, and we manage the proper power usage by our Dynamic PWM for 12V for Diesel or Petrol injection engine. Dynamic #PWM controls the usage of power and, of course, the production of HHO gas based on the RPM's of the Engine. Practically optimizing energy consumption, because on lower RPM's your alternator can not carry a more significant load (Amps). Simply if you put too many Amps (load) on the alternator, the ECU of the engine will read this extra load, especially at lower RPMs. For example, when you wait on idle RPMs at the traffic light) and will start injecting more fuel in order to compensate for the extra load taken from the HHO system.
That is why we developed this device called #Dynamic PWM to be able to better control the load (A) and production of HHO gas, based on the RPM's and engine needs.
I will provide you comprehensive information about the Dynamic PWM in another video here on our KZbin channel, please feel free to subscribe to our KZbin channel and share our videos!
Electrolyte for the HHO kit it's made from Water and Potassium Hydroxide (KOH).
The HHO kit is ready for work now. When we apply power to the dry cell, it will start producing HHO gas immediately. As you see in the video, the HHO Dry cell is on a lower level than the HHO reservoir, so when you fill-up the tank with an electrolyte, practically the electrolyte goes to the HHO Dry cell only by the gravity way. The produced HHO gas in the Dry cell is going up to the reservoir because it's lighter than the liquid and pushing with the produced gas also some fluid. Based on this, we do not need a recirculation pump installed because the electrolyte is circulating between the reservoir and the dry cell by itself during operation.
After the produced gas is in the reservoir, it goes to the HHO bubbler. This device is mandatory for any HHO kit. It does not matter if it's a dry cell or wet cell.
The HHO bubbler has three functions:
1. To take and keep the rough steam which comes with the produced HHO gas from the HHO reservoir
2. To prevent any liquid (electrolyte, water steam, water) goes into the engine air intake
3. To act as an anti-back spark device
The main advantage, when you have HHO bubbler in your HHO Kit is you do not need a one-way plastic valve.
After the produced HHO gas goes into the engine is enriching the air-fuel mixture.
If you like our video, simply give us a Like, Share and Subscribe to our KZbin channel for more exciting videos about HHO gas!
For any questions, just contact us at:
www.hydroxsyst...
/ hydroxsystems
/ hydroxsystems
/ hydroxsystems
/ hydroxsystems

[@jurajsuja7706]

This system I tested in past on VW Golf 1,6 petrol and Opel Astra 1.9 disel . The problem is lambda sonda . If is burning of fuell better because HHO and system will have this info automaticaly increase the flow of petrol or disel . If you want realy saving you need some device for changing the signals from lambda .

[@HydroxSystems]

In most of the vehicles you dont need simulations of the lambda's, and resepctively on ome fo the vehicles you will need! Another aspect is how much your alternator is charging at idle rpms.

[@bmac3394]

Very nice quality system. I have researched these some years ago. I have a 3.0L EcoDiesel with a Turbo. Where do you introduce the Hydroxy in the intake? Before or after the turbo?

[@HydroxSystems]

It can be after turbo, simply because there is a pressure and will not suck the produced gas. It will push it back and out of the system, prctically in the bubbler. Inlet point should be in the air-filter box.

[@bmac3394]

@@HydroxSystems Ok, that makes sense. Mine should be here in a day or two. I may put it in the PCV tube before the turbo as there will be suction there.

[@Arcturian1111]

Im sure the energy mafia cabal isn't going to like this very much...

[@HydroxSystems]

Probably yes

[@JB-wx4wo]

Does this replace need for gasoline... Or just better gas mileage If it just saves... How much miles per gallon..... I went to the website... Doesn't explain what it does

[@HydroxSystems]

It's actually helping the regular fuel to burn more complete, that's why it releases more mechanical power. usually fossil fuels has a lot of loses in heat and the HHO gas just helping the better burning process. It does not subsitute the gasoline in total, Just better gas mileage. How much ity saves , depending on the vehicle, year, brand, model, charging system and of course the setup of the vehicles fuel map to inject less than normal. Sorry about it, our website will be updated soon, right after the migration to another platform.

[@Grandassets]

most of us playing with it are doing it for the savings of 40%-ish, newer vehicles brains auto adjust I have a Ford Flex fuel and no need to adjust timing or O2 Sensors, same with small engines, yes your lawn mower can also run on this 100% but if your not handy with projects it could be a pain in the ass LOL

[@nickfoster6034]

Do you have any video evidence of this actually working? Ive seen videos on thermodynamics debunking that this can actually work.

[@HydroxSystems]

Follow our KZbin channel and you will see results in the future videos we make! There you will see actual results!

[@Arcturian1111]

There are many videos on YT you can watch, just search HHO Cell Camry or Honda etc.

[@antoniotod9614]

show proof of lower fuel consumption via oba2 scanner!

[@HydroxSystems]

Via OBD 2 is quite impossible to measure fuel consumption, but subscribe to our KZbin channel and you will see when we make such videos :)

[@yamtores]

Why can't one of the top tanks serve for both purposes? Is it because that it will require more water volume precision?

[@HydroxSystems]

Bubbler is the safety device in case of a back-spark. It's collecting the rough steam for longer travels, protects the engine in case the system reservoir overflows. :)

[@tsitoharygaiak2322]

Which IS better as électrolyte, hydoxyde soude or hydroxyde potassium

[@HydroxSystems]

Hello, I have used both , but last few years we are working with Potassium Hydroxide (KOH). Makes less foan inside and does not clogging into the gas hoses , for example between the reservoir and bubbler.

[@porcsatul]

shouldn't the gas come out on the other side to cool the plates better?

[@HydroxSystems]

the HHO gas does not cool plates in any way :) if you are asking about the circulation, I can assure you that is the same, we have tested already

[@HydroxSystems]

Hello, we have tested both ways, there is no difference, but when you try to mount this dry cell into a car is a bit comlicated to have connectors on both sides.

[@sinuemedina2550]

What about the sensors of the engine.. will they go off?? I need one for a 2018 V8 Chevy Silverado 1500

[@HydroxSystems]

why the sensors should go off??? Fill this form please: www.hydroxsystems.com/hho-kit-advisor/

[@HydroxSystems]

Hello, sensors has noting in common with the HHO gas, this gas is only enriching the air-fuel mixture to help the regular fuel burn more complete and efficient. Sensors still operating, that is their purpose.

[@Arcturian1111]

How long do you have to refill electro-lite and or liquids.

[@HydroxSystems]

Ones in 500-1000km

[@HydroxSystems]

Hello, usually ones in every 500-1000km . but this also deoends on the weather conditions.

[@valdelacruz218]

what is the thickness size of the insulator. thank you😊

[@HydroxSystems]

Hello, in this HHO Generator the insulators (gaskets) are 5 mm thinckness.

[@alitrainerotomotif8702]

How many composition water and potasium

[@HydroxSystems]

Hello Sir, I'm not sure that I understand your question! Could you please explain what do you mean exactly? You can also leave an email: [e-mail]

[@HydroxSystems]

Hello, if you are asking about the density of the electrolyte, here is 10%

[@jeandenault590]

Vraiment interressant a quel endroits puis-je l obtenir au Québec merci.

[@HydroxSystems]

Hello, you can send us your vehicle's specs to [e-mail] and we will get back to you :)

[@HydroxSystems]

Hello Sir, you can buy only from us: www.hydroxsystems.com

[@gigisorin1]

Bastante caro por lo que es . Entiendo mano de obra pero aún así diferencia entre precio del material y mano de obra es grande

[@HydroxSystems]

Sir, you can always find cheap products, unfortunately we do not sell cheap products! There is thosuands of plexi dry cells and plastic hose barb connectors on the market and Chinese PWM's. You can find the best one for yourself. Cheap is = low quality ALWAYS!

[@bobbob-jw8uo]

I have question... what about the sucking power from the manful of the car ? the sucking power sucks all the water in the bubbler .. do you have a solution for this ?

[@HydroxSystems]

Hello, yes, this is very important question! Please stay tuned to our KZbin channel and you will see! I will make a special video about it! :)

[@HydroxSystems]

Hello, yes, this is great question, which will be interested to many people I guess! wWe have a solution for that, but we did not show it here, please subscribe our channel and you will see when I upload the video especially for the bubbler.

[@linamahmoud1727]

how do you measure the amount of hydrogen gas coming out ?

[@HydroxSystems]

Hello, there is few ways you can measure the debit of gas: 1. With digital debit meter, but the good quality which have accuracy cost around 1500 Euro 2. With bottle with water and count for how much time it will release the water out of the bottle , when it's upside-down, but I can't say that this way is really precise in the measurement.

[@mattacar9432]

What is PH value of the gas generated?.

[@HydroxSystems]

what is PH value?

[@waynesanders1406]

There should be a totally neutral PH since there is a bubbler. WIthout the bubbler that could be different, and whether or not there is a small vac leak would also adjust that value.

[@elvisisinthehouse]

Will it not drain out the battary if the car ?

[@HydroxSystems]

It will not drain anything when it's connected to the car with our Dynamic PWM. You can see it here: www.hydroxsystems.com/category/hho-electronics/

[@humbertotello542]

We're I buy this..I'm from Los Angeles ca.

[@HydroxSystems]

Leave us an email with specs of your vehicle @ [e-mail]

[@HydroxSystems]

Hello, you can contact us www.hydroxsystems.com

[@JoseFerreira-oq2rr]

fantastic were are you to obtain the kit

[@HydroxSystems]

www.hydroxsystems.com/contact/

[@brenohighland1168]

@@HydroxSystems site does not exist

[@HydroxSystems]

www.hydroxsystems.com

[@sebas511]

What are those neutral plates for?

[@HydroxSystems]

It is designed to operate at 12V-14.4VDC, so there is a certain number of SS plates for the certain voltage and certain density of the electrolyte! :)

[@HydroxSystems]

Hello, they are not directly connected to power terminals, but through them electrons passing, so they are not really neutrals, but depends on the voltage you use , you can calculate how many neutral plates you need. There should be arround 2V between 2 plates.

[@sinuemedina2550]

I just bought a kit but with out a bubbler what's the difference??

[@HydroxSystems]

I can not tell you, because I do not know what you bought! :)

[@HydroxSystems]

Which kit have you bought? Without bubbler is risky , cause if some electrolyte goes into the engine where many parts are aluminum , they might get defected. Bubbler is very important part in a matter of safety.

[@sinuemedina2550]

@@HydroxSystems I've been looking and looking for someone to install my kit but have no luck. I live in California near LA is there a place you guys can recommend me to go?

[@masternas777]

How much is it plz? I have a toyota corolla axio.. petrol Where to get the kit plz

[@HydroxSystems]

Hello Sir, for Corolla petrol injection you will need kit HS 2000 or HSL 2000 and Dynamic PWM for petrol injection 12V , you can find them here: www.hydroxsystems.com/category/hho-car-kits/

[@HydroxSystems]

Hello, contact us for more information www.hydroxsystems.com

[@colemanhill1692]

Is this safe? Someone at work told me that these can. Explode upon impact

[@HydroxSystems]

impossible!!!

[@waynesanders1406]

Someone at work doesn't understand physics. Your gas tank is far more dangerous than this water system. WIthout power there is no harmful gas. Even if you wrecked and crack it spilling everywhere, you just have water with electrolyte. If anything it would help with being a source to put out any fire caused by the gasoline. As soon as hydrogen is out in the atmosphere it's gone from the source in seconds. It's the lightest element and shoots straight up into the atmosphere. I have no dog in the fight with this guy or his company, I have been making and developing a system of my own for almost 7 years now.

[@rostravelventure]

Are the HHO cell outer plates aluminum?

[@HydroxSystems]

no, they are not :)

[@HydroxSystems]

Hello, this one especially is made of fiberplastic.

[@donpham2585]

Hi bro How to separate gas hydro

[@HydroxSystems]

Hello, you need to buy a good membrane, which will be sustainable on heat and basis and also to be insulative. Then you can design a cell, which separates the gases.

[@HydroxSystems]

Hello, you will need to create a dry cell with membranes and special gaskets with the membranes, so the gases will go out from different outputs.

[@naveennj5270]

Can I bye this ?

[@HydroxSystems]

Yes, you can: www.hydroxsystems.com

[@HydroxSystems]

www.hydroxsystems.com

[@Tilewarriorsofamerica]

Do you ship to United States 🇺🇸

[@HydroxSystems]

yes

[@HydroxSystems]

Hello, yes, we ship worldwide. www.hydroxsystems.com

[@jayeelerj5420]

Hello, how much?

[@HydroxSystems]

Hello, all prices you can see here: www.hydroxsystems.com

[@HydroxSystems]

www.hydroxsystems.com

[@hho-plus9304]

Очень высокий ток потребления, и очень низкая производительность газа. Это плохо!

[@HydroxSystems]

Hello Алексей, thank you for your comment! As I mentioned in the video this is showing the simple operation on a bench, this is not real installation in vehicle and it's not under proper control in a vehicle. Also, I did not show any debit of gas, right? How do you know what is the production? You can stay tuned with our KZbin channel and you might see interesting things! Thanks!

[@HydroxSystems]

Hello Dear, this is only showing a stand bench system how does it work! In a vehicle, we do not exceed more than 16A and they are at more than 2000 RPM's, at idle RPM we use only 5A. We control this with our Dynamic PWM, which is releasing more or less amps based on the RPMs of the engine. I wonder how do you know what is the debit here? Is it an assumption based on the view of the bubbles?!

[@jaimecastrocastro8998]

HOW MUCH IS IT?

[@HydroxSystems]

Here is our shop: www.hydroxsystems.com/shop/

[@peterk.4266]

Does this actually work..? I hear things from educated people.

[@HydroxSystems]

Stay tuned with us and we will see the results ;)

[@HydroxSystems]

Hello, sorry, we might not be eduvcated, we are practitioners! Subscribe our channel and you will see when we upload videos regarding! Thank you!

[@valentinas12]

400 W? It is too much.

[@HydroxSystems]

Hello, yes, in this case it is, but here we just shwoing how does it work! In vehicles, we do not use more than 16A with our Dynamic PWM, and also this 16A are only when the engine is runnig at more than 2000 RPM's , I mean at idle RPM's is only 5A and when the gas pedal is pressed to increase the RPM's of the engine, the Amps increasing up to 16A. I hope I could have exlain it??!

[@tomclancyblack6721]

this design is draw too much of current ,is not effective need to improve

[@HydroxSystems]

How do you measure the efficiency?

[@HydroxSystems]

Hello, here we are showing the method of operation! It does not matter the consumption. In cars we use 5A at idle rpm's and maximum of 16A at operational rpm's thank to our Dynamic PWM.

[@dannygreen7635]

Are you Bulgarian? You sound like .

[@HydroxSystems]

Yes, indeed I am, but thank god you did not recognize me as Russian ;)

[@lumbrerashow]

La temperatura te sund y no produce hho sino vapor de agua

[@HydroxSystems]

Where do you see what is the temperature? :)

[@lumbrerashow]

Consume demaciado 30A es mucho

[@HydroxSystems]

Who said that we use 30A in a car?

[@HydroxSystems]

Hello, here we are showing the method of operation! It does not matter the consumption. In cars we use 5A at idle rpm's and maximum of 16A at operational rpm's thank to our Dynamic PWM

[@atiquratiq8148]

Can sent me one box for my bike

[@HydroxSystems]

Yes, you can choose from here: www.hydroxsystems.com