How Expert Mechanic’s Change the Center Joint System of a Cat® Wheel Loader 950B | Complete Tutorial

[@d.jensen5153]

These truly are "interesting skills." Wow.

[@fordnut4914]

Damn he good with that torch

[@BobSmith-jf8dt]

ya to leave that tiny sliver is true skill

[@brahimhakim5780]

use the mecanical level for adjusting and nut the guage ,also how can adjust the lower bearing with the upper '(a lot of mitakes )by this way you'll never get the concentricity as it was befor

[@gowdsake7103]

Umm you can measure through ! What it was before failed this will possibly last enough time

[@Anuskasv0]

Great stuff, very limited tools but still getting the job done.

[@frodobaggins169]

Use a line boring and line welding machine like the rest of the world! But first you have to move on from stick welding to MiG welding.

[@ciaucescu4025]

Siete veramente fantastici ve la sapete cavare comunque sempre bravissimi👍👍👍👍👍👍👍👍👍👍

[@DINGERscotland]

Waymtching this worries me seeing this repair, so many things wrong! Poorly prepped surfaces, no chamfer to fully weld the piece in, thin material round the outer edge this is a ticking time bomb for failure! Granted its impressive that the guys can make a repair from scrap material and minimal tools but a couple of extra measures would insure a longer lasting repair

[@creativework]

Good job" konsy city sy ho brother

[@RobotN001]

Параллельность обеспечена лишь базированием относительно необработанного основания, которое может быть и погнуто.

[@davidjoya4441]

The best mechanics I seen work on dirt floors , gentlemen in the comment section watch and keep silent if you disagree with the work create your own Chanel so you can teach all of us how is done .

[@stevenhorne5089]

There are lots of excellent mechanics in the is part of the world, It's just that these guys are an embarrassment to all the mechanic's that know you don't cut out the main support for the vehicle and then weld it back together with just surface welds on top of the paint. They've got the tools there to do it correctly, why are they not doing it?

[@piperdoug428]

Umm packed the pivot bearing in the wrong way around, no way to add load to them now

[@kamilkwasiborsk861]

I thought so too. Tapered face down so that load is pushing it into the taper. But that's just my understanding, could be wrong.

[@stevenhorne5089]

There are lots of excellent mechanics in the is part of the world, It's just that these guys are an embarrassment to all the mechanic's that know you don't cut out the main support for the vehicle and then weld it back together with just surface welds on top of the paint. They've got the tools there to do it correctly, they just don't know what they're doing?

[@patricesimard5990]

They do what they can, with the tools they have. Here just to call a mechanic it will cost you a 1000.$.

[@nigelford6777]

Huh! On our Fiat-ALLIS they were taper roller bearings so all I had to do was make shims that pushed them in together more...lasted for many years until we sold up.

[@nigelford6777]

seemed to be needle rollers on the first eye that they cut out.

[@carsons6519]

Might be able to machine something from nothing but drill sharpening.......ain't mastered that one yet at all....

[@mervhansen3730]

These guys are not ‘expert mechanics’. They’re ‘backyard mechanics’.

[@gorki_look]

Будущее России.

[@timbow50]

How would YOU like to be this vehicle operator after this REPAIR?

[@gowdsake7103]

Plenty operator !

[@prasantajha6871]

Nice

[@thepubliceye]

Now that is using your EyEcrometers.

[@larrywarner4305]

where are grease fittings

[@gowdsake7103]

Umm they dont use em

[@erenildovieirafreitasvieir5166]

ELES SÓ SE ESQUECERAM DE UMA COISA : NÃO DEIXARAM O PONTO ONDE SE ENGRAXA .

[@raymondrobertson3869]

One day Britain will be like that. I hope I am not about to see it. But I will turn in my grave.

[@DINGERscotland]

Britain is already doing repairs to old machinery the difference is the repair is done properly! But even at that we have lost our way with thinking outside the box and to used to replacement items and throwaway things now! Ah it's broke let's buy a new one!

[@kamilkwasiborsk861]

I'd say that Britain is the complete opposite to the kinds of the repairs that are done in the video. h&s in turned up to 11, you have to ware eye protectors to use a parts washer, otherwise you may be laiable for law suit. As always the truth is somwhere in the middle. You should be wearing safety boots when using oxy fuel cutters, but don't make people wear full flameproof overalls on top of your work clothes, when there is 30 degrees + outside and hig vis jacket and hard hat and googles and ear deffenders and thick gloves and steel cap toe boots and a person to watch you work with your mom on speed dail.🤣

[@RafaelArdilesLemke]

If you dont have hammer, use yours hands.

[@trippinballs101]

they say experts ..... they are literally working in the dirt ....why not a shop?

[@longbar2344]

at what point do these 'expert mechanics' come onto the scene? pmsl

[@pieterlagemaat4414]

Experts🤣🤣🤣Using steel hammers on bearings hahaha, welding quality hahaha, no I would not trust these carpenters on my equipment.

[@MrChubbykid1234]

that's not how they do it at cutting edge engineering in Australia

[@Bzmot332bve]

That's very far from expert... Cutting a goddamn whole on the floor, cutting out a structuraly important part, leave dirt in it, then STICKweld some metal there, expert, sure.

[@daymondhardin1236]

At least grind the paint off before welding !

[@d.jensen5153]

I guess that's why he was using 6011 (or local equivalent) right then.

[@christswrath1030]

Experts? Not quite. These are garbage people working on a trash loader. I guarantee CAT wouldn't repair this loader like this.

[@warrenjones744]

Really, I always love to cut the floor out when I perform a center hitch repair....Not🤣

[@shahzadkhan15nov]

No need to call humans, garbage. They are just poor with lack of any resource.

[@buyamerican3191]

"expert" mechanics? this does not look like a "CAT" approved repair facility. Looks more like transvestites attempting a new skill. I'm surprised they actually installed a new bearing but beating the crap out of it installing it I'm sure will make it last longer. The "rolling" jack looks safe enough, what could go wrong?

[@gowdsake7103]

Its crude but damm its skilled