Tap to unmute

How I Built A Joystick Controlled Robotic Arm In Record Time - DIY Arduino

  Рет қаралды 9,234

LIGIENCE

LIGIENCE

Күн бұрын

Пікірлер: 35
@GoofyAhhEngineer
@GoofyAhhEngineer Жыл бұрын
Because of this video, I was inspired so I also made a robot arm made out of cardboard consisting of 4 servos controlled by 2 joysticks. It took me like a few months to finish but I think it was worth it. I really liked the video and I wish you can upload the code from your project soon.
@LIGIENCE
@LIGIENCE Жыл бұрын
Hey, wow. I will be uploading the code this week. This is an inspiration for me, and watch out. I'll be releasing a video on a 6dof robotic arm and some really cool builds with it
@LIGIENCE
@LIGIENCE Жыл бұрын
I'd love to see how your arm turned out. If you're interested, send a mail to LIGIENCETECH@gmail.com might feature it in the next robotic arm video
@LIGIENCE
@LIGIENCE Жыл бұрын
Check the video description for the drive link with the schematics and the code
@goddyrichard4964
@goddyrichard4964 Жыл бұрын
Impressive work boss, i am also venturing into embedded system, i am glad i came across this video, its really inspiring, God bless
@LIGIENCE
@LIGIENCE Жыл бұрын
That's great. I'm glad it's insipiring. Alot more build videos to come and hopefully tutoriasl too , if there's demand for it
@salh2665
@salh2665 Жыл бұрын
❤❤❤😮😮واوو هذا هدا مدهش شكرا 😅😅😊😊
@LIGIENCE
@LIGIENCE Жыл бұрын
You're welcome. Definitely more to come
@BertHeideveld
@BertHeideveld Жыл бұрын
The supply voltage for the servos does not have to come from the Arduino as you can see. You have to give them separate food. The Aerduino now keeps resetting itself and your Robot Arm starts making strange movements. The peak currents (Amp.) of a servo can be up to 1 amp. increase. So a 5 volt 2 amp power supply is needed for smooth arm movement. 2 amp is even better if you want to make multiple movements at the same time.
@LIGIENCE
@LIGIENCE Жыл бұрын
Yes, i agree. I usually separate the power supply for the servos, but the project was made in a rush . THANK YOU FOR THE ADVICE. In my newer projects I'll definitely be implementing the appropriate power supply
@Yinksman
@Yinksman Жыл бұрын
Impressive work ✨✨
@LIGIENCE
@LIGIENCE Жыл бұрын
Thanks alot man
@duckmug1490
@duckmug1490 Жыл бұрын
10/10 ima try it out
@LIGIENCE
@LIGIENCE Жыл бұрын
You definitely can👍
@LIGIENCE
@LIGIENCE Жыл бұрын
Check the video description for the drive link with the schematics and the code if you need them. Have a nice one
@princessbamigboye
@princessbamigboye Жыл бұрын
Celeb 😭😭😭😭 This is why I follow you 🤧 Weldone Chief Thank you for this
@LIGIENCE
@LIGIENCE Жыл бұрын
You're Welcome. More to come
@FuelFactorX-Nigeria
@FuelFactorX-Nigeria Жыл бұрын
Great work.
@kpieceemmry3387
@kpieceemmry3387 8 ай бұрын
Talking about the power did you mention you use 2Lithium battery and another external 5volt? I need clarity on the stable 5volt cos I didn’t see more than the lithium batteries as your power source in this video project
@LIGIENCE
@LIGIENCE 8 ай бұрын
In that video, i used just the 2 lipo batteries, which went to the breadboard power supply module that has a 5v regulator on board. I would advise a much more robust 5v power supply system to ensure the motors get enough power. As my robotic arms jittered a lot
@LIGIENCE
@LIGIENCE 8 ай бұрын
I just checked again, and i ised a buck boost converter module to supply 5v for the system. Looking back at it, a lot of improvement should have been done, and i would be able to do much better now compared to then.
@kpieceemmry3387
@kpieceemmry3387 8 ай бұрын
⁠@@LIGIENCEdo you mind dropping the link to the picture of this boost converter and that means you won’t be using the 2 lipo battery again?
@LIGIENCE
@LIGIENCE Ай бұрын
I'll be redoing this video in a few weeks where I'll explain more with a better robotic arm but for this one the power configuration is this. 2 18650 lipo batteries attached to the input of a buck converter capable of outputting anywhere from 3 to 4 A Because the motors drow about 700mA when stalling from a quick search
@ArchonLicht
@ArchonLicht Жыл бұрын
Good job!
@LIGIENCE
@LIGIENCE Жыл бұрын
Thank you. More to come!
@domeoblaseolmo6558
@domeoblaseolmo6558 Жыл бұрын
How do you make a six joint robotic arm?
@LIGIENCE
@LIGIENCE Жыл бұрын
I'll be doing one in a few weeks. Stick around to find out
@jumbo999614
@jumbo999614 Жыл бұрын
I get 6 donut shape pieces. Where to use them?
@LIGIENCE
@LIGIENCE Жыл бұрын
If they're the pieces i think you're talking about, i think they were used on some of the joints.
@GohGoh123
@GohGoh123 8 ай бұрын
can you please public the entire code
@LIGIENCE
@LIGIENCE 8 ай бұрын
Check the video description for the google drive link
@wonteclanka8585
@wonteclanka8585 Жыл бұрын
Can you send me the code please
@LIGIENCE
@LIGIENCE Жыл бұрын
Sure thing. I'll upload the link in the description of the video very soon. Sorry about that
@LIGIENCE
@LIGIENCE Жыл бұрын
Check the video description for the drive link with the schematics and the code
@taotenHung
@taotenHung Жыл бұрын
làm hết bnh
1% vs 100% #beatbox #tiktok
01:10
BeatboxJCOP
Рет қаралды 67 МЛН
She made herself an ear of corn from his marmalade candies🌽🌽🌽
00:38
Valja & Maxim Family
Рет қаралды 18 МЛН
小丑教训坏蛋 #小丑 #天使 #shorts
00:49
好人小丑
Рет қаралды 54 МЛН
I Built a Mini Mars Rover
11:14
Nikodem Bartnik
Рет қаралды 307 М.
All the RC Planes I Crafted in 2024
3:02
Ray craft
Рет қаралды 1,6 М.
How Robots Use Maths to Move
15:54
James Bruton
Рет қаралды 470 М.
Robotic Arm Motor Selection
14:18
Sichun Xu
Рет қаралды 42 М.
Popsicle Stick Robotic Arm with Arduino | Science Project
13:59
Science Buddies
Рет қаралды 52 М.
1% vs 100% #beatbox #tiktok
01:10
BeatboxJCOP
Рет қаралды 67 МЛН