How I Made My Dream Desk - Office Build Series | Workshop Republic

[@adrianamogames2955]

Awesome build! That desk looks so good

[@starbucks1971]

desk size depth 600 VS 800 your choice ?

[@WorkshopRepublic]

800 as I like my table deep to be able to have my keyboard and monitor and still be able to use it to write stuff

[@Vivicloud01]

So you had to cut the pipe down to sizes you needed?

[@WorkshopRepublic]

Vivicloud01 yes, I had Lowes cut it into rough sizes for what I needed and after testing the best height for me, I was able to adjust using the screws on the threadless pipe fittings. The pieces didn’t have to be exact as you can adjust when adding the fittings.

[@Vivicloud01]

Ok, do you remeber what sizes. I'm looking at getting the ikea gerton butcher counter top with a grey Alex drawer. But still undecided on what leg support I want for the other side. I've seen other youtube videos where people use another Alex drawer, trestle legs, or table legs.

[@Vivicloud01]

If you get a chance could you let me know what sizes you had each pipe cut. I think I'm going to do the same setup bit with the gerton counter top. :)

[@WorkshopRepublic]

Vivicloud01 so the Alex cabinet is around 27,5 in tall with the small feet, so i had four pipes cut at 13.5in and the cross one at 18.5in. You can then use a hack saw or grinder with a cutting wheel to cut it smaller if you need, but those sizes should be good

[@Vivicloud01]

@@WorkshopRepublic Awesome thanks so much. Going to start tmrw in picking up the pecies. :)