How I made this super cool Freddy Fazbear costume! |Part 3.7|

[@SuperChase64]

I’ve never used EVA foam. But hopefully I’ll think about using it for my next cosplay

[@chickenbroscosplays]

Excellent Freddy cosplay! You did a really good job explaining how you built him.👍

[@GraviTNT]

I kinda wanna see all the designing behind the scenes stuff in your journal with the schematics and whatnot

[@protomechanics]

Just made a community post of more of the designs for ya, hope you enjoy!

[@GraviTNT]

@@protomechanics thanks!

[@Tyhxs]

❤😊

[@Thekidwithadream016]

With the FNAF movie getting closer and closer, I think this is an amazing way to make tribute to the hard work that Jim Henson’s creature shop has put into making the main four & golden freddy 😎👌

[@-BONNIE-DUDE-]

And the Yellow rabbit, and shadow freddy, and sparky, and Ella, and Tina, AND that other endoskeleton, and balloon boy

[@fadedoffense]

I saw you at the AMC theatre! That costume was so impressive!

[@ekindle40]

That is beyond amazing

[@protomechanics]

Thank you! I saw your spring Bonnie costume and it looks incredible!

[@ekindle40]

@@protomechanics Oh my gosh that is awesome! Thank you so much ☺️

[@loganprops6818]

if you have a 3d printer i would recommend printing it out. the reasons i would say to use plastics is because the foam holds a lot of heat while you are wearing it. I have built one when I was younger with foam and it was a cold Halloween night, but the foam insulated the heat and made me sweat a lot, it was not the best. the plastics could make it breathable and won't make you heat up too much. it is an expensive option but i would say it would be better, you can choose which approach i personally would print them to make it more comfortable.

[@GIitchie]

not sure why no one (besides me) does this, but you should definitely tape down the paper formats (un cut) onto the foam, then cut with a box cutter instead of drawing the outlines. its just a faster option.

[@BonBon-FN4F]

Amazing Freddy! I love it so much. I’m making Withered Foxy and I hope it turns out this good.

[@Axestil]

This is crazyyy, thank you so much for explaining!! The overall look of Freddy and his electronics as well are very impressive!! I can’t wait to see what you make next, you’re honestly rlly talented

[@veyronツ]

Hey, are you the girl who made the springbonnie suit? It's really cool

[@veyronツ]

Also, do you think that is better to do a BIG costume or something like "human shaped"?

[@Iclearlydontknow]

@@veyronツ I know I’m not the same person you’re talking to, but I would recommend making it big and bulky. When it’s big and bulky makes it look more animatronic than human. I also did the same thing with my Bonnie cosplay and it worked perfectly

[@veyronツ]

@@Iclearlydontknow thanks for the tip

[@Iclearlydontknow]

@@veyronツ No problem

[@yarharfnaf]

i love this, especially your presence in the suit. keep it up!

[@technofurs]

Oh my! This looks so good!

[@Malory-Malicious]

I wanna make a spring Bonnie suit

[@Professorbon]

Same

[@Foxythepirateoffical8800]

I want foxy

[@beckhamgrimes5298]

@@Foxythepirateoffical8800 foxy is definitely gonna be the hardest since his parts sometimes don’t have a shell and are just endo skeletons I’ve seen costumes that use the blackest paint to make it look like there’s nothing in the sides and just the skeleton but it’s still very hard

[@SalvoZer0]

Les go he’s back🔥🔥🔥

[@17amza_]

i have to build this for the fnaf movie, thank you for making this video.

[@ComicsByCris]

Dang dude that's really cool!

[@jackobonniecreations2732]

Brilliant suite! Excellent work! ♥️

[@protomechanics]

Thank you!

[@treykellypodcast]

This is legendary

[@laksananthanandarajah1477]

Incredibly underrated.

[@MoonStarDusk]

yoooooo this us amazing and helpful , this will certainly work to upgrade my roxy. awesome video and thank you for sharing your process!

[@protomechanics]

Thanks! I love your Roxanne costume too!

[@ILIKEMONEH2]

when i make a freddy fazbear cosplay im gonna stick two poles together and recreate the fnaf 3 statue

[@JohnnyMarstonl.0.l]

dude, this is great! besides the tiny hands this is awesome. im thinking of being withered freddy this halloween

[@protomechanics]

TINY HANDS HAVE NO CORRELATION TO ANYTHING ELSE Thanks for the comment though! I’m reworking the whole costume right now and I’m making sure to make the hands bigger and more accurate!

[@JohnnyMarstonl.0.l]

that great! cant wait to see a new versionince this version is already good!@@protomechanics

[@piaintext1264]

What was the foam density and thickness for the mask?

[@protomechanics]

I used 10mm foam for the head, I was still able to get a nice shape and have it sturdy at the same time! Though the ears were made with 5mm foam because it was easier to get that nice curved shape with the thinner foam.

[@SGF4.]

Wow. Anyone making a real fnaf location, hire this guy in

[@Nightmareshadowfnaf102]

you could have strung a wire for the whole suit and had to be under the nose so you can put the button at honks the nose in there, so if you just press down on the nose at honks, like, supposedly, it works in the real game

[@leethememerwolf]

great cosplay Proto!!!!!!

[@bhuvanlolabhattu9574]

can you do a video on how you made the eyes move that would help a lot

[@tater_tot7236]

This is just amazing! Also what size EVA foam did you use?

[@protomechanics]

Thanks! I used mainly 10mm foam, but I also used some 5mm foam here and there.

[@tater_tot7236]

@@protomechanics Thank you 😁

[@ThatRaid]

can u leave the name of the person who gave u the templates I'm very interested in them. And good work

[@lilagordon6389]

About how many yards of fabric did you end up using for the full build? Looks awesome btw! I plan on making a Freddy using the same templates

[@nicklal7611]

I want a suit so bad. Looks awesome!

[@jackfish2706]

Wowzers!😎 this is a very cool video🎉😊😮. I’ll be sure to show my grandson this😇🙂😎

[@BlissfullyEvil]

Do you have any footage of you scaring people on Halloween, or out in public? I would looove to see your suit in action!! Great stuff!

[@protomechanics]

Thanks! I don't have much footage of me scaring kids, but I do plan on doing another outing sometime soon!

[@BlissfullyEvil]

@@protomechanics Awesome!!!

[@Kak37]

Optimus: that is a great Freddy cosplay

[@cynthiaserrano919]

Can you transfer the templates onto a cricket and have the cricket cut it for you?

[@CalfoxThefoxOfficial]

this is what i did for my springbonnie suit but i had create the template

[@Roman-real]

Or did you buy the eyes and all the electrical system that goes with it?

[@treykellypodcast]

Was that a hint of the next costume at the end ??

[@protomechanics]

I would take it a ‘face’ value…

[@cadencase5216]

@@protomechanics *Withered Bo-*

[@LEONARDOMOCMANN]

good video and cosplay!!! But I have a question, where to get that thick foam?

[@peterhamsterhotdog613]

Im looking into making a costume for each character from fnaf 1 for a fnaf movie im working on

[@Rxbin64]

Bro how does nobody know about this. this is insanely good, the only really accurate freddy costume i know so far. only daregularsauces freddy will be able to look as good as yours Keep it up mate!

[@protomechanics]

Thank you so much! I aspire to be as good as Daregularsauce so it's incredible to be compared to the same level as him!

[@ParrotsAccount]

Dang someone hasn’t seen regular sauce freddy

[@Rxbin64]

@@ParrotsAccount I don't think you understand my comment

[@BoxedByCharlie13]

What size paper

[@hangphan9537]

Can you make a vid are a short that makes the Freddy’s eyes seeable?

[@Jant-u3k]

I recommend 3d printing

[@QUIETKIDGT]

He doesn’t have one stupid

[@ohbarsam]

what size paper did you use for this, looks awesome!

[@elspethkirk765]

That’s impressive

[@Vobius]

the mack is amazing i just have a question how do you control the direction of the eyes

[@protomechanics]

Great question! Right now the eyes are just programmed on a loop so I don’t control them. Though I plan on upgrading it to where I’ll be able to control the eyes with a joystick on the inside of the left hand.

[@elminecrafteano2876]

te quedo epico papu una duda para hacer un golden freddy como es

[@maximuswolverine6812]

This guy is underrated

[@blueberryman9765]

What’s the name of the circuit board you used I want to make something like this with the sound and everything but I just don’t know if i can use any circuit board or just the one you showed but if you can’t reply to my comment I just might make it without sound

[@radicalracing09]

got a link to where you got your fabric?

[@ismaelvillegas1251]

Cool Freddy cosplay how do made the servo move on the eye?

[@XayGaming56]

Can I ask what circuit board you used?

[@sanjuanagutierrez3350]

Yeah let's see the behind the scenes 🙂👍

[@sonnybautista9174]

How did you do the ears and how do you print the parts for the eyes

what paper size did you use to print those patterns?! Thanks!

[@tomythebear]

Can u show use how u program the eyes cause I’m making a Freddy costume

[@cinamaticverse1274]

Can you describe how you made the jaw move with the servo or maybe link a video where they show you how?

[@pacoburguete2002]

How did you build the soundbox??!?

[@Tarnished-v3n]

What size paper did you use ? Is it A3?

[@Mrsquid74]

Freddy in the background be like: looking in your soul

[@Fnaf-VHS-Horror]

I have a question so i am trying to make a freddy costume but i want to make it to where the front of his face comes off and shows the indo skeleton like withered bonnie

[@kaitheraccoon20]

are you going to make bonnie and maybe chica next?

[@protomechanics]

I'm going to do a withered bonnie next. Though Chica does seem like a good character to do too!

[@leathaplank1358]

how do you only have 1.58k you should have 100k and thank you you make it ezey

[@WubblesVR]

How do you know what templates to put together? Please reply if you see this😢

[@DanielMuresan-wc9qj]

Can you please cole to my house with the freddy fazbear costume?

[@darkempire4182]

Very cool man!

[@spliccsgames7187]

Hey I’m planning to make my own Freddy suit do you have any tips

[@natsukianimation]

I’m going to make a Bonnie cosplay but I have a question: is Etsy and that guy trustable?

[@protomechanics]

Its awesome to hear your going to be making your own Bonnie costume! To answer your question: I would say that the patterns that unfold wizard makes are very accurate but that comes at the cost of it being a little tedious to make. I would recommend watching some videos on how to work with pepakura models before you start anything. I can’t wait to see how the costume comes out and let me know if you need help with anything else!

[@natsukianimation]

thanks! When I start to making the cosplay I’ll sent you the link of the YT channel I’ll create for it :)

[@natsukianimation]

@@protomechanics I made the channel! In a few days I'll start uploading videos: kzbin.info/door/S0VOm5sMek8UhM1PVCTANw

[@protomechanics]

@@natsukianimation awesome! Can’t wait to see what you have in store!

[@SLUSHATRON]

Looks great

[@GreenPotreal]

You should make costumes for the Fnaf movie

[@protomechanics]

THERE'S A FNAF MOVIE???!!

[@Marksy72]

This is insaneee

[@bleuuujayyentertainment7095]

I wish there was a video on the Bonnie suit by unfoldwizard

[@protomechanics]

I have something very similar coming soon!

[@bleuuujayyentertainment7095]

@@protomechanics omg I'll definitely check it out when it's ready

[@sheliannab-d9776]

I know this is an older video but how did you make the head please

[@Ha3lyrockss]

This a pretty awesome cosplay. How much would you sell these cosplays cause I really want one

[@Mental1987]

How Much Fabric Do You Need For The Head?

[@protomechanics]

I would say about a yard and a half

[@Mental1987]

@@protomechanicsThanks!

[@Robinhoodwest22]

How long did the head take to make?

[@Landon.Adams30]

5:44 what mother board did you use

[@Oceanic-Ball]

THIS IS SO COOL! I am trying to make a Fnaf costume too. But cheap. How much was all of this?

[@69420heheha]

Can you put in the link for the models pls? I wanna make a Freddy head

[@Dlp_Toon]

When u posting a new video?

[@Unbeatable-Toast]

How did you do the eye movement

[@ASideFried]

One question, could I do it at home based on your tutorial?

[@Toastrobotix]

I wish I had a dad that nice,

[@IGoldenFireI]

How much you want to buy it? XD

[@veronicahoglund1278]

how did u make the eyes move? is it possible for a person with zero ide with electronics make moving eyes/ blinking? do u have any tutorial?

[@WheezyThePenguinYT]

Lots and lots of coding

[@aRanposimp]

I hope my bro does not get springlocked bc yknow

[@toytails6]

Freddy look like fnaf Help W.. Freddy.

[@newgwg]

I’m your 1,000 sub lol

[@protomechanics]

Wooooo! Thank you so much!!

[@Ha3lyrockss]

How much would you sell it for?!!❤

[@KTXleader]

It looks amazing. Keep up the great work, but the microphones in the wrong hand.

[@protomechanics]

Thank you! The microphone is in the other hand because I wanted to use my dominant hand freely.

[@KTXleader]

@@protomechanics oh, sorry

[@KTXleader]

@@protomechanics but I love the shoot

[@KTXleader]

@@protomechanics sorry suit, stupid auto, correct

[@protomechanics]

@@KTXleader lol your good

[@gamercool92]

BREAKING NEWS: Guy springlocked in bear suit

[@SkullyWormy]

THIS IS SO COOL!!! Oh my GOD, I would love to chat with ya more about your work this is PHENOMENAL, ALSO WOULD LOVE if you would join me and trey in the Sauce Server, others would love to see your updates and progress on this and future work, it's INCREDIBLE!!

[@protomechanics]

That would be awesome! I would love to work with all of you!

[@protomechanics]

You should be able to reach me on my channel's about page

[@SkullyWormy]

@@protomechanics awesome! ^^

[@zirobk]

do more vids bro, you could be like a big KZbinr for sure

[@protomechanics]

I’m trying 😭

[@novato1174]

Are there templates?

[@Big_Slgma]

You could make a little tube from your nose to the top of the hat so you can breathe better, like a snorkel.

[@tylersanimations8993]

7:32 I always come back

[@alexsssi1848]

It's time to deploy Freddy Fazbear

[@protomechanics]

I’m currently working with the Ukrainian military to mass produce these and deploy them against Russia

[@Elevator_Maintence]

How to fred.

[@protomechanics]

Fred is how

[@GlitchCableYt]

Withered Bonnie is Next.. Obviously.

[@Eevee_-wz1uo]

I have been looking for an hour how to wire eyes, someone have any tutorial 😭