How I Recreated Over 1000 Sounds

[@Bthelick]

Glad to see a fellow creator championing vital. great video 👊

[@MyshkoMusic]

This video literally changed my life in 15 minutes. Thank you.

[@josealejandrogarciarojas1115]

your channel is great

[@xSaintxSmithx]

I never subbed to someone so fast. I FINALLY FOUND THE CHANNEL I'VE BEEN SEARCHING FOR!!! THIS is what I've been trying to learn about sound design

[@bx2mikii]

Eric, just wanted to say, you are a godsend. Your videos are the most articulate explainations on the internet, and have seriously stopped me from just grabbing sample packs and taking things into my own hands and figuring it out. Thanks for the great tutorials as always

[@Goodmonson1]

Eric, some of the presets you've made over the years came from requests I sent. Genuinely every time, they always sounded AMAZING. Like, perfect. You're a master at what you do, thank you for sharing your knowledge and skills with us!

[@poochcatthebiter]

These videos are amazing. I am so glad to be part of the Bowmania!

[@chopov11]

Awesome vid, can’t wait for the next one

[@BUKAYOSAKA_7]

this is the first video of yours that i have watched. Very cool! I will watch more videos from you for sure

[@YoureNowOnTV]

For all you share, and give to people, thank you 😊👍🙏

[@Ashernu]

Amazing video, love these steps!

[@ptootie5657]

i feel like it has some noise but im not gonna critique THE eric bowman lmao. Its actually crazy how much you simplified this stuff!

[@radiofloyd2359]

I think what it has is some post processing distortion, as well as it being blended in with a light noise atmosphere. It's not really valuable, IMO, for the actual lead synth sound in this occasion to itself have the noise baked in. Hearing it again, I think it probably has some tape processing for a flutter and wow effect, as well as the distortion. It might also be used for compression. The heavy compression on the bus that includes the piano, the synth and the vocal sighs (that I'm guessing are phone recordigs because Fred again) is what makes the noise, specifically how the heavy compression brings the noise floor very high (though the dynamics are still there enough that the noise is near imperceptible with some louder exceptions).

[@russellholloway7465]

Thanks so much , really clear explanations , so helpful

[@JuniorTlhape]

Pretty much the best sound design channel on KZbin.

[@micahcurtis5333]

this is incredible

[@triaixeta]

wow great work!! waiting for another video. usually i’m recreating sounds only aurally, it was interesting to know new methods using some theory and analysing, ty!!

[@BigRasProd]

Thanks Maestro ! 🙏 Real Content, Great knowledge ... So rare (also precious) on YT in 2024 ;)

[@АнтипПопов]

The free VirtualDJ can also extract stems by saving them to a USB drive (I used the OSFMount as USB drive emulator)

[@-adc]

Dude Eric, your content is top notch. Thank you for putting this stuff out here.

[@sounds-and-samples]

This was nothing but excellent! Thank you, Sir!

[@0Human1]

Wow dude amazing video, I've been looking for a channel like this for a while. Can't wait to see more from you.

[@iamxenobyte]

Can you explain what you did at 9:39? I know you are in the wavetable editor, and are raising harmonics, but what are those bars that you are raising and how do i know which ones to raise?

[@EricBowman]

Those bars are harmonics and I'm raising the 1st and 3rd ones because I noticed they were louder in the reference track. I explain using wavetables for "additive" synthesis in this video if you're interested: kzbin.info/www/bejne/aqG4ZpiEort2rrMsi=jsjbzseeRY4sHmlU I also explain a little more in my steel drum tutorial.

[@iamxenobyte]

@@EricBowman ty!!

[@iamxenobyte]

You actually have explained this so fucking well you have no idea the bar you just raised for sound design tutorials easy sub

[@steamer2k319]

If you temporarily enabled both tracks, you could side-chain one of them into SPAN and have the two distributions overlayed in the same plot. 🫡

[@darioparisi6863]

Didn't know this, thanks

[@christopherlicata6617]

AWESOME!!!

[@billrazor6591]

Very informative, thanks. I love Vital

[@JadeEyeland]

this is the greatest sound design video on youtube

[@skyborax5159]

Ten has been on repeat for me lately!! Love Jim Legxcy

[@UKBassTutorials]

This has some really useful techniques for recreating sounds, even for someone like me who does this type of work regularly!

[@footfalcon]

Awesome, as always!

[@thejoelovely]

Really useful video. Many thanks.

[@Albertmars32]

Looking forward to the next video. Thanks for the lessons

[@MOONARCH420]

Broooo this vid is elite

[@LuanBermudez]

N I C E . Thanks a lot!!!!

[@ash3r01]

My goat

[@poochcatthebiter]

The GOAT!

[@anicca3179]

Impressive! Thanks for uploading!

[@DeanKennyMusic]

Brilliant information, well done

[@VelenZaiga]

Earlier I tried to make a recreation of a triangle sample in FL Studio for practice and followed your steps, but found the harmonic series didn't match up with any note: The highest points were G#6, G7, F8 and C9. This sample's base note is C5, and the pattern is consistent. However, no notes I seem to play, even accounting for the proper dynamics, seem to correspond to this pattern. Is there something I'm misunderstanding here?

[@EricBowman]

Check out my physical modeling tutorial I just released. I would use the spectral compressor to separate the tone and transient. Then make a wavetable out of the tone. If it has inharmonics, you’ll need to set the wavetable size extremely big, then pitch down the oscillator. I’ll make a video about it sometime soon.

[@agustinbene]

Really intresting to see your process. Have you tried SynthPlant?

[@Marc_Angel]

Merci, toujours pertinent.

[@makeshiftsavant]

For stem splitters, Have you tried stemroller yet? Requires a cuda GPU but it's fast and good

[@myFreeMickey]

3:16 Pirate's calling

[@OfficialGOTCHA33]

Omg I’ve found the production Guga 😂

[@rabmccudden683]

How to make a sizzle

[@rabmccudden683]

I wonder what Wagu sounds like

[@alfiekovacs]

Sick viedo

[@elijahjflowers]

Thank you!

[@tobyw3635]

thank you so much for this eric i will be watching it over and over again to wrap my head around it, is it possible to recreate drum sounds using this method aswell? thanks

[@EricBowman]

It can apply to drum sounds too. Though an acoustic drum sound is a lot trickier to synthesize. It can be easier to find a similar-sounding drum sample and process that to sound more similar.

[@SpeedRacerx89]

Thank you Eric. Way too smart for me lol.

[@koncreteto2758]

Very interesting 👌

[@XantuxNepomuk]

Amazing 🔥🔥

[@jeremybowden3134]

Have you got a Tagelharpa preset in there? 🙏

[@franklopez4028]

This is the best

[@VelenZaiga]

Is the highest spike you see in SPAN the actual note being played, usually?

[@VelenZaiga]

I suppose I have one more question. How do you pick out what is the best base wavetable (or sound type/wave type) to use to recreate a sound. I listen to sounds and I find I have a hard time picking out the base wave...

[@VelenZaiga]

One other, does Gaudio and Spleeter work with songs that do not have lyrics?

[@EricBowman]

If the sound is harmonically rich, I start with a saw wave and subtract from there. If it’s more simple or has lots of inharmonics, I may start with a sine wave and add from there. Square and triangle waves are useful for synthesized sounds with only/mostly odd-ordered harmonics.

[@sparerodinog3760]

hi eric hope you answer my question, im a serum user maybe you know this, when you put an envelope on the filter does it automatically enable a key tracking in the note you play?

[@EricBowman]

No, in Serum you have to click the little keyboard icon near the filter.

[@megamatt1915]

a vital video for us sound designers. pun intended

[@loganschockelt]

@EricBowman Question friend. What's the easiest way to get tracks like Fred Agains into your DAW so you can compare it? Does that system also work for sounds that aren't on standard media platforms. E.g. a video game

[@loganschockelt]

Thanks Eric for doing what you do!

[@EricBowman]

I just record my computer audio using Audacity and Windows WASAPI

[@loganschockelt]

@EricBowman the simple solution is the best! I sincerely hadn't thought about that. I figured out how to record my mic I should be able to figure out how to change the source. Thankyou

[@brintewilan9599]

Hello Please can you create the argy aria bass sound design please

[@BestTop-tj3kx]

Very very good

[@davidasher22]

Sweet!

[@averyintelligence]

10:42 reminds me of stormzy - shut up

[@jsonslim]

I started from making the 1st one, then i made 2nd and so on))

[@TheNovaProjectGaming]

Would this method work for heavily fistorted/saturated sounds like synths from Bring Me The Horizon?

[@EricBowman]

Yeah it works for any sound. It can be harder to pinpoint what the waveform was before heavy distortion but if you listen for certain harmonics popping out, that can help.

[@TierHarribel]

Okay but I am asking the hard questions here though, which did you prefer Pepsi or Coke?

[@EricBowman]

Coke!

[@kerzxxv467]

🤯

[@Will-qx9vm]

American English is really annoying at times... ''Timber'' is not pronounced timber. Oh no no no... TAMBER. But, timber is however pronounced ''timber''. FFS. STOP THIS MADNESS

[@finnorra]

Painfully basic. Dunno why I expected something actually advanced.

[@maddietourmaline46]

Don't act smug, this is for the rest of us

[@finnorra]

@@maddietourmaline46 I'm just honest, who made the rule that you can only spread positivity on the internet? I just got clickbaited and then disappointed and I'm expressing my disappointment.

[@sashimi879]

​@@finnorragood luck with your chemo treatment next week

[@sparerodinog3760]

​@@finnorrarecommend something advanced im trying to improve too