How I setup my 5000 watt powmr inverter and solar panels

5000 Watt Powmr solar inverter settings,

[@rongray4118]

You are definitely someone I would appreciate speaking to - we are looking into the EG4 and CALPHA MPPT Charge Controller(s) 100A/48volt. We will be charging an Absolyte GX 2,000ah/48volt VRLA battery bank. Subscribing in the hope that you put up more videos like this explaining you system and performance. Thank you!

[@lawrencedavidson6195]

Nice setup. Greetings from Jamaica.

[@scottfree8726]

Greetings, Thank you. This system could probably run a 4000 square foot home with air conditioning, in sunny Jamaica

[@fueledbytacos218]

Ty brother I got the new low frequency inverter from powermr

[@hstorysalie]

I'm about to buy the LF model too. Just can't decide, powemr or sungold power

[@GmanfromTexas]

I have a portable 400W solar panel hooked up to my 24v 3000 PowMr. I have 36 volts coming in at the solar terminals but the PowMr does not show thew solar on the screen

[@bimmers323ci]

Cool

[@vinotec4136]

am planning on buying a powermr but i have very litte ingo on the split phase function so i get 110 220 volts any help and it can work without battery

[@triplextriplexxx8225]

hey i have powmr 12kw inverter and 9kw of solar panels . is it normal on cloudy day i get like 700 volts from panels but amps are so low like 0.5a or 1a . today we connected them and it was heavy cloudy day . voltage from panels is coming like full almost 700volts but amps are so low as it is so cloudy . i wonder is that normal or there is something wrong ?

[@dibeerwolf1645]

how do the battery communictes with the inverters ? via DC voltage Kabel or via LAN-cables ? could you show the setting at Inverter piont by point for the Voltages for the battery ( V battery point, back to grid / V battery charged point, back to battery / Bulk-Voltage of battery / keep charge Voltage of bttery / Low DC voltage to cut off voltage of battery) ? pls show us thanks

[@scottfree8726]

Solar inverter charger PowMr 1 SbU 2 60.0Hz 3 APL 4 46.v 5 55.2v 6 SnU 7 50A 8 L16 9 56.8 10 120min 11 56.8 12 48.8 13 30s 14 49.6 15 46.4 22 dIS 23 EnA 24 EnA 25 dIS 26 dIS 27 dIS 28 40A 29 dIS 30 1 35 44.8v 37 53.2v 38 120v Battery input 54.3 1.2 over float Float is 13.6 x4 = 54.4 Absorption 14.4X4= 57.6

[@adibra7239]

I have a 200ah lifepo4 battery and 12v powmr solar charger inverter 1500w . Can i use these settings?

[@jazzil7887]

Struggle with my brand new 5600W PowMr., which I try to use without battery .PV gives around 170 VDC, and the unit stays on bypass no matter what parameters I change. It gives me error 03 (no battery). On/ Off switch does nothing, like it is in ön"position all the time. WiFi module shows that the power flow is not coming from the PV. Am I doing anything wrong?

[@scottfree8726]

Maybe just get 4 deep cycle car batteries until you can afford something better.

[@potsandmiguelplayground9799]

I have 10.2kw hybrid on/off, how can we stop the back flow of electricity to grid without switching to hybrid?

[@scottfree8726]

I don’t know I’m off grid

[@runneryg]

@@scottfree8726 YOU NEED TO UPS THE SETTING IN SITTING NO 3 I THINK I DON'T KNOW ABOUT GRID BUT IT MIGHT ME THE SAM,E TRY IT NO HARM. MIGHT WORK.

[@capitale274]

What are your wat on your solar panels

[@skimowhite586]

Mine is crazy i could plain day light and i only get 400w max. Not sure what im doing wrong

[@scottfree8726]

I don’t know mine is working excellent

[@ralphyc81]

I just bought a 10000w and the same thing I have max. .5 kw with 14 panels in series

[@firssasa3009]

Is it still working fine?

[@scottfree8726]

Yes working great

[@nizamersoft]

Can this inverter work without batteries?

[@scottfree8726]

They have to have 48 volt battery. But if the battery is turned off (breaker switch) it runs off solar alone.

[@nizamersoft]

​@@scottfree8726 What I have just learned is for grid tie, off grid and hybrid inverters... you either have grid or battery. If you do not have one of them, solar panels are of no use. I guess dc to dc step down coupled with pure sine wave inverter is the only way to run ac load from dc of solar panels without having to buy battery and grid.

[@scottfree8726]

@@nizamersoft yes you can. Or run cheaper car or golf cart batteries

[@carlbrrt]

Is your charge controller still working? On the forum people say the charge controller gets stuck.

[@scottfree8726]

Shut down twice on really sunny cold days, said (08) AC bus over voltage. So I reduced from 11 panels down to 10 in series

[@Powells-Off-Grid]

If your SOK are 12.8 lifepo4 batteries, you should be on L16 not on 14. Your charge choice of CUB is also wrong. It should be on SNU.

[@scottfree8726]

Yes I already switched it back to SNU, you are correct L16. I do not know why I put it on L14. Solar inverter charger PowMr 1 SbU 2 60.0Hz 3 APL 4 46.v 5 55.2v 6 SnU 7 50A 8 L16 9 56.8 10 120min 11 56.8 12 48.8 13 30s 14 49.6 15 46.4 22 dIS 23 EnA 24 EnA 25 dIS 26 dIS 27 dIS 28 40A 29 dIS 30 1 35 44.8v 37 53.2v 38 120v Battery input 54.3 1.2 over float Float is 13.6 x4 = 54.4 Absorption 14.4X4= 57.6

[@scottfree8726]

I made some mistakes, but here is my setting now. Solar inverter charger PowMr 1 SbU 2 60.0Hz 3 APL 4 46.v 5 55.2v 6 SnU 7 50A 8 L16 9 56.8 10 120min 11 56.8 12 48.8 13 30s 14 49.6 15 46.4 22 dIS 23 EnA 24 EnA 25 dIS 26 dIS 27 dIS 28 40A 29 dIS 30 1 35 44.8v 37 53.2v 38 120v Battery input 54.3 1.2 over float Float is 13.6 x4 = 54.4 Absorption 14.4X4= 57.6

[@davidohara7669]

Jesus Christ? Where?

[@scottfree8726]

What do you mean?