How I Straighten my Cutting Plates for my Big Shot!

  Рет қаралды 25,709

Angela Kerr

Angela Kerr

Күн бұрын

Пікірлер: 298
@bella-bee
@bella-bee Жыл бұрын
I’ve recently found a similar video. A lady heating her plates in a tray in the sink with boiling water for 20 mins. Soaking. She weighted it down with more boiling water to keep the heat going. It worked. Her husband (engineer, scientist ) said please don’t do it in the over at higher temperatures because Perspex plastic will release toxic fumes! Maybe not at 170 degrees C, I don’t know, but listen, it could. Also listen because it works at only boiling point, 100deg C, so it’s not necessary to heat up your whole oven, just boil some water. Getting the plates wet also releases all the bits into the water, as if by magic! As the plastic relaxes. She didn’t wrap them in foil either.
@hp77
@hp77 10 ай бұрын
I will try that, thanks I think we should all get together N inform the company they NEED to improve the cutting plates this is ridiculous each time we have to either try and straighten it out ourselves from boiling water or put it in the oven or just buying new ones. This is so unacceptable. What do U think.
@jl4643
@jl4643 9 ай бұрын
I am new to this. Got my big shot foldaway for Christmas & already it’s warped. I tried using a blow dryer which didn’t help. I wonder if this is partly why it’s being discontinued. @@hp77
@fatima-zahrakajji4821
@fatima-zahrakajji4821 9 ай бұрын
Can you post the video link?
@vickygarris6150
@vickygarris6150 8 ай бұрын
​@@fatima-zahrakajji4821kzbin.info/www/bejne/mWG9fKuHgblmfcksi=fEekIwU4Tc66J8EY
@DonnaJo3452
@DonnaJo3452 8 ай бұрын
I haven’t used any directions on straightening my plates, I haven’t found that need to except for one set, and I already had extra ones so I guess in the future I’ll be using directions to straighten them! The KZbin creator’s name that the lady below mentioned is Jennifer McGuire. If you search warped plates in her channel you’ll find her video. An interesting tidbit is her husband was on the team that invented Press and Seal! Thanks to Angela for letting us know how she straightens her plates!
@the_nerdy_np
@the_nerdy_np 2 жыл бұрын
This is brilliant! One thing that I also do to prolong the life of the plates is I always put a piece of that super thick, hard craft paper between the cutting part of the die and the plate. Not only does it significantly reduce where on the cutting plate, but then whatever paper I am actually cutting doesn’t end up getting embossed with scratches from the cutting plate.
@AngelaKerrDesigns
@AngelaKerrDesigns 2 жыл бұрын
That is a great tip!! Thank you so much for sharing it with me. I will give it a go. Hugs and smiles 🌸☺️🌷💗🦋
@createwithpamela
@createwithpamela Жыл бұрын
I don't know how I missed this one, Angela, but I'm glad I found it! I once broke a plate in half while using it -- it was very bent (I have the normal-sized Bit Shot). So I had to buy a new set. But now, hopefully, I won't have to do that again! I have one very bent plate now, so I'm off to beat it into submission ... but I will use your method instead! (I should've known you'd have a solution to this problem!) Hugs from Ireland!
@ontwaaktgijdieslaapt9322
@ontwaaktgijdieslaapt9322 Ай бұрын
I saw another video where they used self healing mat instead of the cutting plate, just cut it the right size. I tried that and it works perfectly! Never have to buy new plates again,huge money saving on that!
@catharinabellekom2013
@catharinabellekom2013 Жыл бұрын
Thank you Angela from an 88-year young woman in New Zealand. You'r a life saver. xx
@shirleypugh4177
@shirleypugh4177 Жыл бұрын
Wow! I was about to buy some new plates Thank you so much
@mudtea
@mudtea Жыл бұрын
Hello, thank you so much for sharing this video! I just tired it with my Spellbinders cutting plate and it worked like magic!! For me, this works so much better than using boiling water!
@magselliott7319
@magselliott7319 Жыл бұрын
Oh my gosh, you have no idea how this drives me crazy and how many plates I have gone thru with my die cut machine! Thank you SO MUCH for doing this video for us!! You are a life saver $$$$
@carolync9992
@carolync9992 Ай бұрын
Thanks for your video tip. All my plates are warped. Will try your oven method. Best wishes.
@jessicaeiss2541
@jessicaeiss2541 3 жыл бұрын
I have never seen this done this way. Good to know!
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
I am glad you have found this useful, Jessica! Thank you so much for watching lovely lady! 🌸☺️💗
@christineburas3487
@christineburas3487 3 жыл бұрын
Excellent. No idea how much money I have spent on new, replacement cutting plates! Thank you!!
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
Glad I could help! Than you so much for watching. I am so pleased you have found it helpful xxx
@lindadow5319
@lindadow5319 3 жыл бұрын
Wow oh wow! That works like magic. I bought new plates through Wish, and one broke the first time I used it. They were rubbish. I'll be definitely trying this to revamp my old plates. I have both the big shot and big shot plus, so this will save a lot of money on new plates. Thank you for sharing Angela xxx
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
I am so pleased you tried it and it has been useful. I do hope it saves you lots of money on plates, Linda. Great news. Hugs and smiles xxx
@carolward6833
@carolward6833 4 ай бұрын
Well done
@caroleEvans2020
@caroleEvans2020 3 жыл бұрын
Ty so much Angela for such a great tip.xxx
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
You are so welcome, Carole, I am so pleased you found this helpful. Thank you so much for watching. Hugs and smiles 🌸☺️💗🦋
@mimsie732
@mimsie732 3 жыл бұрын
Excellent tip, thanks. That will save a lot of money. Xx
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
Thank you so much! I am so glad you have found it helpful. Hugs and smiles 🌸☺️💗🦋
@carolbeeding4270
@carolbeeding4270 3 жыл бұрын
Thanks for the great tip,
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
You are so welcome, Carol! I am so pleased you found this helpful. Thank you so much for watching. Hugs and smiles 🌸☺️💗🦋
@monaes-u3f
@monaes-u3f 6 ай бұрын
Amazing! Thank you so much! ❤
@quirkycottagesandwattnots380
@quirkycottagesandwattnots380 3 жыл бұрын
Oh my goodness .... Thank you so much for sharing this. Really great 🥰
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
You are so welcome! I am so pleased you found this helpful. Thank you so much for watching. Hugs and smiles 🌸☺️💗🦋
@ilderkira6196
@ilderkira6196 3 жыл бұрын
Wow, I have never seen this before. I just got my new big shot a week ago and will keep this tip in mind for when the plates gets really bent :) thank you for sharing this tip Angela.
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
You are welcome Ilder. So pleased you have found it helpful. Hugs and smiles xxx
@pauletteburk3176
@pauletteburk3176 Жыл бұрын
I got my new sizzix hot shot electric just today and I have already warped it and scratched it. I warped it I think when I used the 3d embossing folder with the incorrect plates. I was sick over this. I will try your idea but my husband recommends I use my heat press. Has anyone done that?😊
@annariginalmake
@annariginalmake 3 жыл бұрын
FAB top tip- this vid is going straight in to my "important videos to refer back to" playlist!! Thank you so much
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
You are most welcome, Anna. So pleased you have found it helpful. xx
@SHAHASPEPA
@SHAHASPEPA 3 жыл бұрын
Great tip
@veraluciavalentini2729
@veraluciavalentini2729 3 жыл бұрын
thank you very much for the tip, it was very valuable 👏🏼👏🏼👏🏼😉
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
I am so pleased you have found it all helpful, Vera. Thank you! xx
@ceciliajimenez7927
@ceciliajimenez7927 3 жыл бұрын
Thanks for sharing your ideas
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
You are most welcome, Cecilia. SO pleased you are enjoying them. xx
@lorigordon1970
@lorigordon1970 3 жыл бұрын
Great tip. I will have to try that. Thank you for sharing
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
Wow, so pleased you found this useful! 🌸🦋☺️
@deeannafreshwaters3282
@deeannafreshwaters3282 3 жыл бұрын
I am thrilled to have this information. I use heat to flatten my "magic mat" but did not know that the acrylic mats could be saved, amazing.
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
I am so pleased you have found this helpful, Dee Anna! Thank you so much for watching xx
@AngelroseDesings
@AngelroseDesings 3 жыл бұрын
Thanks for sharing. Happy crafting on a budget 💲. Happy everything on a budget💲. See👁 you in the next 🎥 and on the flipside. 👼🌹
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
Thank you so much Vanessa! So pleased to hear that you have enjoyed this 🌸☺️💗
@michelemrich1598
@michelemrich1598 3 жыл бұрын
I’ve never seen this method before. Wow! Works great!
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
Thank you Michel! So glad you have enjoyed this! I hope you consider giving it a try. 🌸☺️💗
@shulaney4639
@shulaney4639 3 жыл бұрын
Good to know - thank you!!!
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
You are welcome Shu! Thank you so much for watching. 🌸☺️🦋
@lori88ish
@lori88ish 3 жыл бұрын
I think this is the best solution out of all the ones I have seen. Thanks a bunch!! TFS Hugs and Smiles
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
You are so welcome! I am so pleased you have found this helpful, Lori. Thank you so much for watching and your kind words. Hugs and smiles xx
@andreaherrmann5776
@andreaherrmann5776 3 жыл бұрын
Thanks for the tip I only have a small die cutter machine but the plates are expensive so i am going to try this.
@mariaelenagalan6178
@mariaelenagalan6178 3 жыл бұрын
Gracias Angela.
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
Muchas gracias. Estoy muy contento de que lo hayas disfrutado. Abrazos xx
@pamstikkelman8069
@pamstikkelman8069 3 жыл бұрын
thank you wondered how i was going to fix my bent plates
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
There you go then, Pam! Perfect timing. Hugs and smiles 🌸☺️💗
@TLMarzewski
@TLMarzewski 3 жыл бұрын
Thank you for sharing your tip!
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
You are most welcome! 🌸☺️🦋
@Fit_Kitty
@Fit_Kitty 3 жыл бұрын
I have not seen this before and I have been die-cutting for about 15 years. I can't wait to try this! I have thrown away several plates over the years, now feeling sad about that. Thank you!!!
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
You are welcome. So glad you have found this tip useful! Hugs and smiles 🦋☺️🌷
@andreawenkebrauner2350
@andreawenkebrauner2350 3 жыл бұрын
Wonderful. I’ll try this right away. Thank you so much ♥️
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
You are welcome! I am so pleased you have found it helpful! 🌸☺️💗
@cindyrhodenizer7199
@cindyrhodenizer7199 3 жыл бұрын
WOW that's fantastic! I have 4 plates I need to do. Thanks for sharing Angela! ❤🌹😃
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
That’s fab, Cindy! You are welcome! So glad you found it helpful! 🌸😋💗
@lilynz.l3
@lilynz.l3 3 жыл бұрын
Wow, this is such a wonderful tip, dear Angela! Thank you so much for sharing!!! 🤗👍💕🌸💕
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
You are welcome Lily! So pleased you found this helpful! 🌸☺️💗
@jetleg60
@jetleg60 3 жыл бұрын
Angela this is so helpful. I have a couple of sets of plates to do. Thank you, Jeanette
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
You are so welcome, Jeanette! xx
@cindycindy2266
@cindycindy2266 3 жыл бұрын
Wow! Thank you for sharing this great tip! 🙏😃
@maungl
@maungl Жыл бұрын
Thank you!🙂
@rosemarietsutsumi1029
@rosemarietsutsumi1029 3 жыл бұрын
Thanks for sharing this idea..🌞🦋🇺🇸
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
You are welcome, Rosemarie xx
@barbsterling4913
@barbsterling4913 3 жыл бұрын
I never knew you could put them in the oven! Gotta give it a whirl. Thanks for sharing this tip!
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
Give it a whirl Barb! It works a treat. You are welcome xx
@odettepeters7493
@odettepeters7493 3 жыл бұрын
Thanks this was a great demo!
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
You are most welcome! So glad you found it helpful, Odette 🌸☺️🦋
@mrsmcphate
@mrsmcphate 2 жыл бұрын
TFS Angela. I've been using my heat gun to flatten mine. It takes FOREVER because I have several die cutters and lots of plates. I was wondering about using the oven! So there you go! I CAN use the oven and do a couple at a time. Thank you so much!
@AngelaKerrDesigns
@AngelaKerrDesigns 2 жыл бұрын
Absolutely. Give it a try. I am sure you will love this technique. Thank you so much for your fabulous comment. Hugs and smiles 🌸🌷🦋🐰🎀🌼
@hildadavidson6559
@hildadavidson6559 3 жыл бұрын
MAGIC!!! M sooooo happy you showed us how to do this before I went out to buy new plates for my Big Shot. Thanks so very much Angela! XOX
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
You are welcome dear Hilda. Thank you so much for your kind compliments. I can feel your excitement! 🌸☺️💗🦋
@rebeccagreen2219
@rebeccagreen2219 3 жыл бұрын
You clever clever girl well done 😊👍
@diannebaldwin3667
@diannebaldwin3667 Жыл бұрын
Hi Angela, Thanks for the great tip. I did buy new ones before I saw you video but will now try this with the old ones as I haven't yet thrown them !!!!
@AngelaKerrDesigns
@AngelaKerrDesigns Жыл бұрын
You are so welcome! I am so pleased you are keen to try this out. It worked very well for me. Hugs xxoo
@MissDaisyParsley
@MissDaisyParsley 3 жыл бұрын
Oh, thanks for sharing this! My plates get so warped up and I’ve tried lots of things to straighten them out! Can’t wait to give this a go!
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
You are so welcome! I am so pleased you have found this useful, Susan! xx
@cathismith2624
@cathismith2624 Жыл бұрын
Hi Angela , I came across this absolutely amazing, lifesaving video this afternoon when I was desperately looking for a way to help my plates - because I actually can't afford new ones!! You're an absolute legend for discovering this 🥰❤️❤️ Now I'm off to 'stalk' your journals that others are raving about in the comments!! Much love Cathi in Australia xx
@AngelaKerrDesigns
@AngelaKerrDesigns Жыл бұрын
I am so pleased that you found this too useful Cathi! It does work a treat. Thank you so much for your amazing support! I hope you enjoy the journal videos too. Hugs and smiles to you in Australia!! 🌸🌷☺️💗😘
@prettybee30
@prettybee30 3 жыл бұрын
Neat idea, i have a plate or two that i need to straighten. Tfs
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
You are so welcome! Give it a go. You are going to be pleasantly surprised. xx
@alritawagner5841
@alritawagner5841 3 жыл бұрын
Thank you.
@jacquiliddell1811
@jacquiliddell1811 3 жыл бұрын
Brilliant it worked Wow!
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
Yay, I am so pleased you tried it, Jacqui! 🌸☺️💗🦋
@debbieboddy4201
@debbieboddy4201 Жыл бұрын
I did it yout amazing lady keep giving us your amazing support ❤️
@AngelaKerrDesigns
@AngelaKerrDesigns Жыл бұрын
You’re most welcome, Debbie! So pleased you have found this helpful!! Hugs and smiles 🌸☺️💗🦋
@jeangreen1810
@jeangreen1810 3 жыл бұрын
Great tips Angela. Thank you so much for sharing with us. 😘🌺🤗💖
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
You are so welcome dear Jean! So glad you found this too helpful dear lady. Hugs and smiles 🌸☺️💗🦋😘
@lauradavey9467
@lauradavey9467 3 жыл бұрын
wow great idea thanks for sharing
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
You are welcome Laura! So glad you found it helpful! 🌸😋💗
@vickibusybee
@vickibusybee 3 жыл бұрын
Thank you Angela. 🌸You are a marvel. 💐 I’ve never thought of doing this. Xx 🌸
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
You are welcome Vicki! It was not my original idea, but one I read about long ago. The plates work so much better when straightened. 🌸☺️🦋
@susantabone1570
@susantabone1570 3 жыл бұрын
Thanks for the great tip
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
You are most welcome Susan! Glad you found it helpful. 🌸☺️🦋
@lindastewart5630
@lindastewart5630 3 жыл бұрын
Thanks for sharing Angela🌸 you’re a little gem💎💖X
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
You are most welcome Linda. SO pleased you have found it helpful. Hugs and smiles xx
@liettelafontaine7936
@liettelafontaine7936 3 жыл бұрын
Thank you Angela!!!That's a great tip ,next time i will try it!!!
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
Thank you so much Liette! So pleased you have enjoyed this! 🌸☺️💗🦋
@nancynorris9822
@nancynorris9822 3 жыл бұрын
Awesome! Interesting! Practical! I don't have one, but still... TFS🤗
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
Thank you dear Nancy! You are so sweet! 🌸☺️💗🦋
@denisejames855
@denisejames855 3 жыл бұрын
Thank you Angela. I usually submerge the plate in a bath of hot water, in the oven, with another container filled with water on top, to achieve much the same result. I think your method may generate more direct heat so will give it a go.
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
I like your idea too, Denise. Thank you so much for sharing it with us. Hugs and smiles 🌸☺️💗
@shirleythornton910
@shirleythornton910 2 жыл бұрын
Thank you for saving me £30!! I was just on the point of ordering new plates.
@AngelaKerrDesigns
@AngelaKerrDesigns 2 жыл бұрын
Glad I could help! So pleased for you! Hugs and smiles xxx
@patversteeg1667
@patversteeg1667 2 жыл бұрын
Boy did I need this info. Thanks so much
@AngelaKerrDesigns
@AngelaKerrDesigns 2 жыл бұрын
You’re welcome, Pat! Hugs and smiles 🌸🌷💗☺️🐰
@anniesews
@anniesews 3 жыл бұрын
I hadn't seen this method of straightening cutting mats before. Seems fairly easy to do. Thank you for a great video.
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
You are welcome. It really was easy. So glad you found it helpful. 🌸☺️💗
@loke-art7383
@loke-art7383 3 жыл бұрын
Wow, absolutely fantastic tip🥰
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
So pleased you have found this helpful, Look. Thank you so much for watching, Hugs and smiles ☺️🌷🦋🌸🍁
@karenegan1688
@karenegan1688 3 жыл бұрын
Remarkable result, Angela. Thanks for the tip.🌸
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
You are welcome, Karen! So glad you found it helpful 🌸☺️💗🦋
@daphnefowler9344
@daphnefowler9344 2 жыл бұрын
Just did my plates whoop whoop thanks angie it worked xxxx
@AngelaKerrDesigns
@AngelaKerrDesigns 2 жыл бұрын
Yay! That’s great Daphne!! ☺️🌷🌸💗
@daphnefowler9344
@daphnefowler9344 2 жыл бұрын
@@AngelaKerrDesigns sooo you never answered my south africa question angie
@karlakoykka-walker
@karlakoykka-walker 3 жыл бұрын
Amazing how that worked. Thanks for sharing this great tip!
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
You are welcome, Karla! So glad you found it helpful! 🌸☺️💗🦋
@carolrigby186
@carolrigby186 3 жыл бұрын
Wow! What a great tip. Thanks for sharing ❤
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
You are welcome, Carol! So glad you have found it helpful. 🌸☺️💗🦋
@debbiesmith6293
@debbiesmith6293 Жыл бұрын
Thank you for sharing this.
@carmelinasaunders9681
@carmelinasaunders9681 3 жыл бұрын
What a great tip. Thanks for sharing.🤗
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
You are so welcome, Carmelina. I am so pleased you enjoyed it all. Hugs and smiles xx
@Thegrungyrose
@Thegrungyrose 3 жыл бұрын
Brilliant!! Thx for sharing.
@irismoles9369
@irismoles9369 3 жыл бұрын
Thankyou for sharing this great tip
@samanthasutherland2969
@samanthasutherland2969 Жыл бұрын
Wow, thats awesome - thanks for sharing!
@AngelaKerrDesigns
@AngelaKerrDesigns Жыл бұрын
You’re welcome Samantha!! Thank you for watching! Hugs 🌸💗☺️
@donnacarraway9182
@donnacarraway9182 Жыл бұрын
Thank you Angela!!
@MG54321-a
@MG54321-a 3 жыл бұрын
Amazing but simple. Thanks.
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
You are welcome Michelle! 🌸☺️🦋💗
@ozjan7927
@ozjan7927 3 жыл бұрын
What a great idea hon! Thankyou so much! 😊❤️🇦🇺xxx
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
You are welcome, Jan! xx
@beverlybuford9055
@beverlybuford9055 Жыл бұрын
Thank you! I really need to do this!
@Angela-rj4dm
@Angela-rj4dm 2 жыл бұрын
That's amazing 👏 thank youuuuu
@AngelaKerrDesigns
@AngelaKerrDesigns 2 жыл бұрын
You’re most welcome! Thank you so much for watching! 🌷🧵✂️🌸☺️💗🦋
@cindyinaz2357
@cindyinaz2357 3 жыл бұрын
WOW what a great idea… i’m definitely going to do this tomorrow! Thank you
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
I hope it all went well with your plate baking, Cindy. Glad you found it helpful. Hugs and smiles xx
@cindyinaz2357
@cindyinaz2357 3 жыл бұрын
@@AngelaKerrDesigns my husband was not feeling well, unfortunately plate baking got delayed… i am definitely going to try it for sure, soon!
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
@@cindyinaz2357 I hope he is doing a lot better Cindy. 🌸🦋🌷
@cindyinaz2357
@cindyinaz2357 3 жыл бұрын
@@AngelaKerrDesigns he is thank you for asking 💕
@heidishaw2175
@heidishaw2175 3 жыл бұрын
Wow!!!!
@bethtobin5312
@bethtobin5312 3 жыл бұрын
Oh my gosh this is an awesome trick. Thank you so much for sharing. Hugs and smiles!
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
You are welcome! So glad you found it helpful! 🌸😋💗
@NettieTPapercrafter
@NettieTPapercrafter 3 жыл бұрын
Thanks Angela!
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
You are so welcome, Nettie! I am so pleased you found this helpful. Thank you so much for watching. Hugs and smiles 🌸☺️💗🦋
@1janhelene
@1janhelene 3 жыл бұрын
Angela, from your 83 year old viewer in Northern California - you never disappoint. These practical tips are so VERY helpful. Since I'm a newbie I still watch earlier tutorials because they are so important, basics like gluing for journal parts and which glue to use. I would like to hear what started you in Journaling, since you are accomplished in other of the "home arts", and I think others will also. Even though my printer went kaput I found a place to print out the purple passion series 💜👌. Are you still pleased with your printer listed on Amazon? I am considering what to buy. Keep presenting your envelope ideas. No matter how many, because they're delightful. Wish I had a DVD with all the ones so far. Have a great week.
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
Dear Janice, so pleased to hear that you are still enjoying all the tutorials. So lovely to hear that. I am just delighted to hear that you find them useful. I will try to remember to share some more of my crafting histories just for you. On the printer front, I am very happy with my HP Envy. I have had two in 8 years. I only bought a second one to print on thicker card. The first one is still going strong. I passed it into my son and it runs as well as the day I bought it. Stay safe and sound, lovely lady. Hugs and smiles 🌸☺️💗🦋
@daffodilangel8724
@daffodilangel8724 3 жыл бұрын
Hi Angela, re your HP envy photo printer, is this suitable for printing digitals rather than photos? And how do you find the cartridges - someone who reviewed the printer mentioned 4 months of instant ink included. Best wishes and thank you for your delightful videos. 👍🇦🇺
@elizabethcherris5382
@elizabethcherris5382 3 жыл бұрын
That is amazing! Thanks for sharing, I will definitely use this 😊 💗🌸🌼🌷🌹🌻
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
You are so welcome Elizabeth. I am so pleased you have enjoyed this xx
@fibergoddess1
@fibergoddess1 3 жыл бұрын
JUST WOW!!!!!! I was planning to order new plates this week. THANK YOU, THANK YOU!!! 👏🏽🙌🏽💜
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
You are welcome! So glad you found this helpful! 🌸☺️💗
@helengough4599
@helengough4599 3 жыл бұрын
Excellent great idea tfs 😊🤗
@mandy.austin
@mandy.austin 8 ай бұрын
Good idea!
@pammipayne3334
@pammipayne3334 3 жыл бұрын
Firstly, you're nails are beautiful. Thank you so very much for the tip on the plates. I have the smaller version of the big shot, I don't see why it would not work. I will need to buy more foil and then give it a go. I looked on Amazon £11.99/$16.51 for new plates. Or for the A4 it is £19.99 /$27.52 Which means I can buy more card and some embossing powders. Thank you once again :) :) :)
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
WOW, Thank you so much Pammi! My daughter does my nails for me. She is studying to be a Beautician, so I am very fortunate. I am the guinea pig, LOL. So pleased you found this helpful. Hugs and smiles xxx
@pammipayne3334
@pammipayne3334 3 жыл бұрын
@@AngelaKerrDesigns that is the best guinea pig ever job. It costs £40 in the uk to have great nails. I wish your daughter all the best with her studies. I used my Sizzix today. :) :and my card arrived. What a great day. I love to smile but extras are always welcome. xxx
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
@@pammipayne3334 thank you Pammi! So lovely of you to say so! She really enjoys it. We live in the UK, so I know you are right about the price there. I am very blessed. She does a mean paraffin wax pedicure as well. I love that too. ☺️🌸💗🌻
@pammipayne3334
@pammipayne3334 3 жыл бұрын
@@AngelaKerrDesigns Happiness is a key element. My Uni Tutor used to say if you get a career that you love, that you look forwards to getting to work the next day then you will never work again. He was so right. Ahh yes but your girl is also blessed to have such a up for it mum. Perfect combination. My girl is a fully trained mechanic but recently went into nursing. Baffling but I am always super proud of her. As I am sure you are of yours. xx :)
@jacquelineteague3545
@jacquelineteague3545 Жыл бұрын
I love this idea
@labradoodledandies4697
@labradoodledandies4697 3 жыл бұрын
I will certainly give this a try. I tried another method that didn't help, but this looks much more promising. Thanks!
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
I am so pleased you are keen to give this a go. It worked very well for me and the plates are still straight. xxx
@debbieboddy4201
@debbieboddy4201 Жыл бұрын
thankyou so much its saved me so much 💓
@AngelaKerrDesigns
@AngelaKerrDesigns Жыл бұрын
That’s awesome!! So happy for you. 🌸☺️💗🦋
@tinatarr6735
@tinatarr6735 3 жыл бұрын
I have the big shot plus and my plates are bent. mainly one because I try and use the same one for the top to better protect one. I love this idea Angela and I will be using it.. My husband works in glass and they have plexie glass and I was going to see if they could cut me some providing I can get the exact thickness. Its worth a shot. You are truly amazing with your great Ideas.
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
I would love to hear how that works out, Tina. It is most definitely worth a shot.So pleased you have enjoyed this idea, lovely. Hugs and smiles 🌸☺️🎄💗
@kathyzorn9186
@kathyzorn9186 3 жыл бұрын
Thank you Angela💜💜😘
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
You are welcome, Kathy! Thank you for watching xx
@jennyburnett2098
@jennyburnett2098 7 ай бұрын
Thank you so much will try
@karengordon64
@karengordon64 3 жыл бұрын
Definately trying this Angela. Mine is a Spellbinder. Thank you so much.
@denisejames855
@denisejames855 3 жыл бұрын
Karen see my comment above as I have a Spellbinder 6 and I've never purchased new plates.
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
I am sure it should work too. Similar type of plates. Thank you so much for watching Karen. 🌸☺️💗🦋
@dorothyandrews8872
@dorothyandrews8872 2 жыл бұрын
Wow, this is a great tip. I still have been reversing them and turning them often, but going to try this next time they need it. Thank you so much.
@AngelaKerrDesigns
@AngelaKerrDesigns 2 жыл бұрын
You are so welcome, Dorothy! I am so pleased you have found this helpful. It does work. Hugs and smiles xxx
@chaspelu
@chaspelu 3 жыл бұрын
Many thanks for sharing such a great idea!!!! Will try it I
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
Thank you so much for saying so, I am so pleased you have found this helpful. xx
@Mommyoffive4Him
@Mommyoffive4Him 3 жыл бұрын
Genius!! I will have to keep this in mind when I get mine! Thanks for sharing, Angela!
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
You are so welcome Kerri! So glad you found this helpful! 🌸☺️💗
@gayemiller7643
@gayemiller7643 3 жыл бұрын
How timely! I was just dealing with a warped plate (Cuttlebug) last night.
@AngelaKerrDesigns
@AngelaKerrDesigns 3 жыл бұрын
That’s fabulous! Thank you so much for watching, glad you found this helpful! 🌸☺️💗
Fixing & Avoiding Warped Die Cutting Plates
20:14
Jennifer McGuire Ink
Рет қаралды 249 М.
DIY Replacement Die Cutting Machine Plate from Dollar Tree
16:40
Crafting For Almost Everyone
Рет қаралды 12 М.
Мама у нас строгая
00:20
VAVAN
Рет қаралды 12 МЛН
coco在求救? #小丑 #天使 #shorts
00:29
好人小丑
Рет қаралды 70 МЛН
From Small To Giant 0%🍫 VS 100%🍫 #katebrush #shorts #gummy
00:19
how to clean and straighten die cutter plates
6:19
thefrugalcrafter Lindsay Weirich
Рет қаралды 235 М.
Dollar Tree Cutting Mat Hack for Sizzix/other cutting machines
4:43
Donna's CreArtive Life
Рет қаралды 84 М.
Friday Quickie: Keeping Your Big Shot Plates from Warping!
9:37
The Creativity Cave
Рет қаралды 137 М.
How To Flatten Your Die Cutting Plates
9:05
Tina Guigui Dornbaum
Рет қаралды 25 М.
Self healing cutting Mat and your bigshot machine
20:11
Stamp with Joy
Рет қаралды 71 М.
Must-Have Craft Tools for 2024: Unleash Your Creativity 🎉🎉🎉
20:20
Little Bit of Calm and Crazy
Рет қаралды 37 М.
Is your Magic Mat Warped?  FIX IT in less than 5 minutes!
9:24
Debbie J's Crafting Corner
Рет қаралды 16 М.
Week 38 - Which Die-Cutting Machine is Best?
15:16
Annette Green
Рет қаралды 8 М.
Annoying Lines On Your Die Cuts?! Do This!
8:43
Handmake With Love with Anna Helman
Рет қаралды 66 М.
Мама у нас строгая
00:20
VAVAN
Рет қаралды 12 МЛН