How much copper is inside a 70-foot extension cord? - Junk to Treasure - ASMR - Casting Bronze

  Рет қаралды 2,021

Scrap2Cast

Scrap2Cast

Күн бұрын

Пікірлер: 47
@aidinlayne
@aidinlayne Жыл бұрын
That was dope. I dont mind getting recommended these videos at all. Keep it up!!
@Scrap2Cast
@Scrap2Cast Жыл бұрын
Thanks brother! 🙂👊🏼🍻
@JsStack
@JsStack Жыл бұрын
Great melt and pour. The bars look awesome. Can’t wait to see what you make with them.
@Scrap2Cast
@Scrap2Cast Жыл бұрын
Thanks brother! I’m going to cast new crucible tongs😁👊🏼🍻
@JsStack
@JsStack Жыл бұрын
@@Scrap2Cast Nice! Can’t wait to see them.
@Scrap2Cast
@Scrap2Cast Жыл бұрын
🙂👊🏼🍻
@sesch629
@sesch629 Жыл бұрын
Before this channel gets massive, I'd just like to leave my mark to prove that I was here since the beginning.
@Scrap2Cast
@Scrap2Cast Жыл бұрын
Hahaha awesome brother! I’d love to see the channel get huge, I’ll keep my fingers crossed 😁👊🏼🍻
@sesch629
@sesch629 Жыл бұрын
​@@Scrap2Cast Give it time. I have a feeling it'll blow up before the end of the year.
@Scrap2Cast
@Scrap2Cast Жыл бұрын
That would be awesome if it did! Thanks for the encouragement bro!
@quantumfoam2843
@quantumfoam2843 Жыл бұрын
I don't know why this fascinates me. Keep up the good work!
@Scrap2Cast
@Scrap2Cast Жыл бұрын
Thanks brother! After 4 years of casting under my belt, it still fascinates me as to how much junk I scrapped to get that pile on the table. Looking at 200 lbs of recovered copper that was destined to rot in landfill is a good feeling 🙂. Thanks for watching! 👊🏼🍻
@saschakonze6867
@saschakonze6867 Жыл бұрын
these AL-Bronze Bars came out really nice. looking forward to your next video.
@Scrap2Cast
@Scrap2Cast Жыл бұрын
Thanks a bunch my friend! I’ll be melting those bars down again in the near future 😉👊🏼🍻
@timsmith9645
@timsmith9645 Жыл бұрын
Awesome aluminum brass bar's thanks for sharing s2c
@Scrap2Cast
@Scrap2Cast Жыл бұрын
Thanks brother much appreciated! 🙂👊🏼🍻
@timsmith9645
@timsmith9645 Жыл бұрын
You're welcome friend anytime
@Scrap2Cast
@Scrap2Cast Жыл бұрын
🙂👊🏼🍻
@RLWolf80
@RLWolf80 Жыл бұрын
That twist with the cardboard flip was funny. completely caught off guard with that bit of..;SQUIRREL.
@Scrap2Cast
@Scrap2Cast Жыл бұрын
Hehehe I love the cardboard flip 😁
@ellyej
@ellyej Жыл бұрын
That’s cool, i’m gonna go cut every cord in my house now 😎
@Scrap2Cast
@Scrap2Cast Жыл бұрын
Lmao awesome brother! Just make sure the cords are unplugged when you do or you’ll get a helluva zap 🤣👊🏼🍻
@pauljcohen2007
@pauljcohen2007 Жыл бұрын
Love it - that was so cool!
@Scrap2Cast
@Scrap2Cast Жыл бұрын
Thank you bro! 🙂👊🏼🍻
@royalgaming7216
@royalgaming7216 Жыл бұрын
Good looking bars looks great also pro tip if your upcoming project is something that needs strength when you remelt the aluminum bronze add a few pieces of cast iron from breaking up an old cast iron pan or something and that will give it the ability to quench Harden and add to the strength but if you just going for something artistic the color looks perfect
@Scrap2Cast
@Scrap2Cast Жыл бұрын
Thanks a bunch brother and thanks for the tip! I plan on making new crucible tongs out of Aluminum bronze. Pretty much copy ArtbyAdrock and BigstackD’s tongs that they use. I know ArtbyAdrock only used copper and aluminum to make his but I’m definitely willing to toss in a few pieces of cast iron for strength. 🙂👊🏼🍻
@royalgaming7216
@royalgaming7216 Жыл бұрын
​​@@Scrap2Cast glad I could be of help and no problem but with anything I would recommend doing some research before jumping into it but you basically just want to put in anywhere from 2 to 5 % in weight of cast iron you melt it and some of the cast-iron will dissolve due to the aluminum and because of the iron it allows it to quench harden and is stronger in general but careful with too much aluminum or too much iron it will cause it become brittle and if you try and quench it it'll crack and if you ever have any questions or concerns about an alloy or anything you can always go to r/Metalfoundry
@CandSMINING
@CandSMINING 11 ай бұрын
Another great video brother. Very interesting aluminum Bronze make. I have been going to try this also. Thanks for sharing.😎😎⛏⛏🔥🔥
@Scrap2Cast
@Scrap2Cast 11 ай бұрын
Thanks brother! If memory serves me correctly I think I did an 88% copper, 12% aluminum mix on this one. Love that brownish gold color. Besides ingots the only other casting I’ve done in aluminum-bronze was a 12” long cannon. Thanks for watching brother 🙂🍻👊🏼
@KrakenCasting
@KrakenCasting Жыл бұрын
You know, for just guessing on that aluminum ingot, the color looks pretty spot on! Not bad!
@Scrap2Cast
@Scrap2Cast Жыл бұрын
I estimated it was about 12-15% of the weight but it did have a bit of slag in it which I’m pretty sure got scooped out beforehand so yeah, not too bad huh? 😁 Thanks for watching brother! 👊🏼🍻
@PhilipRomeo69
@PhilipRomeo69 Жыл бұрын
Great job I like making aluminum bronze I think I am going to make different items from holiday baking molds
@Scrap2Cast
@Scrap2Cast Жыл бұрын
Thanks brother! I definitely liked making aluminum bronze and will be doing it more and more on the channel 😁 Those baking molds sure come in handy! Every time I visit the thrift store I always keep an eye out for different molds. Thanks for watching brother! 🙂👊🏼🍻
@redrum2612
@redrum2612 Жыл бұрын
There it is! 🎰
@Scrap2Cast
@Scrap2Cast Жыл бұрын
Heck yeah brother! Now I can get my fix and not go broke! Now where did I leave those keys to the money box…
@redrum2612
@redrum2612 Жыл бұрын
@@Scrap2Cast 😆 🤣 😂
@Scrap2Cast
@Scrap2Cast Жыл бұрын
@@redrum2612 easy way to save money. Downside is I’ll always be fake broke 🤣
@donl4914
@donl4914 Жыл бұрын
Great Job Scrap2Cast!!!! The first time I did Bronze it came out as a mix of Aluminum and Copper separating at the top of the pour. I still have it and you can see the Copper on top. First-time failures work to your advantage as well. Maybe I'll remelt it later, but it's interesting looking...lol Keep it coming Bro!!!! Always a good day to melt!!! 🔥🔥💯💯🔥🔥😎😎
@Scrap2Cast
@Scrap2Cast Жыл бұрын
Thanks brother! Out of curiosity did you give the material a good stir? I must’ve stirred it for a good solid minute, although the camera footage shows a “quick stir” 😉 I’d love to see a picture of the bar you made
@johnpeterpaul8869
@johnpeterpaul8869 Жыл бұрын
I was wondering what filters you feel are the safest to use for your respirator.I been using M3 6006. Niosh.
@Scrap2Cast
@Scrap2Cast Жыл бұрын
I’ll be honest with you, I use the respirators that HF sells. They work okay but if I cast into Petrobond sand I can smell the burnt sand even with the respirator on. If I had my choice I’d try to buy a breathing apparatus like firemen use.
@bonnienklyde7423
@bonnienklyde7423 Жыл бұрын
👍🔥🔥
@Scrap2Cast
@Scrap2Cast Жыл бұрын
🙂👍🏼👊🏼🍻
@МарияГрек-ц4э
@МарияГрек-ц4э Жыл бұрын
I am don't understand weight in pounds. I need it in kilograms. Please!!!
@Scrap2Cast
@Scrap2Cast Жыл бұрын
I gave weights in pounds and grams every time in this video
@hoaaoxuan8234
@hoaaoxuan8234 Жыл бұрын
Hay lắm em
@Scrap2Cast
@Scrap2Cast Жыл бұрын
🙂👍🏼🍻
БАБУШКА ШАРИТ #shorts
0:16
Паша Осадчий
Рет қаралды 4,1 МЛН
OCCUPIED #shortssprintbrasil
0:37
Natan por Aí
Рет қаралды 131 МЛН
Melting Brass locks and fixtures into bars and coins! Awesome process! 
9:36
Carters Coin Roll Hunting
Рет қаралды 1,9 М.