Gonna be doing a very similar setup but with a sidewinder manifold. Lucky for me I tig weld for a living so all the fab work I can do at home. Clean build though man Enjoy it
@bobbydelamar606 Жыл бұрын
I lost track. What was the total? I'd love to turbo my K24A2 CRX.
@jgc00642 жыл бұрын
Absolutely amazing build bro!!🔥🔥🔥
@angelsanchezjr84802 жыл бұрын
Great build. Car looks amazing.
@lavrentievv2 жыл бұрын
None of those parts are budget. Can easily get a full set up for 3-4000$
@rxtoy232 жыл бұрын
Where??
@edgardogaray74268 ай бұрын
Absolutely agree this is in no way a budget turbo kit supper clean but not budget
@apollonitro48026 ай бұрын
Budgets are relative bro
@adamyang88152 жыл бұрын
Yo I love your content so much keep it uppp 🔥🔥
@oemworx41472 жыл бұрын
Thank you!
@risingmoon1480Ай бұрын
How much did the car make ?
@awd_pirate19462 жыл бұрын
Its clean but why not ceracoat all the exhaust hot side? Or at least wrap/turbo blanket?
@oemworx41472 жыл бұрын
Thanks. Stay tuned for next update video.
@simplyklean5 ай бұрын
Could you let me know where you got those steel lines and fittings going from wastegate to controller?
@farrinmccahill69204 ай бұрын
I want that in my mine and go bye bye and just go slow to, our you have to keep it wond up, no time for turb lag ,its just wanted to go in the launch mode!?
@markanthony50112 жыл бұрын
Are you still using the stock K24A pistons and rods in your turbocharged engine?
@smokeandmirrors-pk6ic7 ай бұрын
He didn’t mention a rebuild so, yes. Not sure why he dropped 2k on turbo but left stock intervals smh
@CarolinaTunerCultureCTC2 жыл бұрын
Very informative!!! Good job
@Hello_its_me_mario2 жыл бұрын
Umm. That drain tho. How is it holding up?
@adamloveshondas31224 ай бұрын
But did you put rods and pistons …. turbo is sucking all that hot engine bay heat 🤦🏼 but overall looks nice just don’t understand why people build a time bomb 🧐
@gregorykirchner6327 Жыл бұрын
What fuel regulator is that
@Dfwrich2 жыл бұрын
what size cold side piping? 2.5"?
@oemworx41472 жыл бұрын
Yes.
@bluegizmo19838 ай бұрын
Just a note for people doing builds in the future: oversized injectors (i.e. buying larger injector than you need for your planned build just so you can go bigger in the future like he did in this video) is a BAD idea! Any tuner worth their salt should know that. Going with bigger injectors that you need makes tuning down low, especially idle, very inaccurate. This is because the larger your injectors are (when you can't use all the injector yet because their oversized for your current build) you have to turn the injector duty cycle down so low at idle and low speed that they are either barely opening or open too long, as no injector likes to be ran and super low or super high duty cycle, i.e. not above 90% duty cycle because they can stick open, and not below 2% to 5% duty cycle because they may never open, and if they are too big for your build you will get real close to the minimum never opening duty cycle so you'll be forced to run too rich down low and idle. Stick with injectors that are JUST big enough for your planned build plus maybe 5% to 10% overhead, and upgrade the injectors in the future if you change your build or boost levels.
@davidmorris-fz6ts5 ай бұрын
if you're getting tuned on k pro yes, not if you're getting tuned on a haltech ecu or anything that runs ve maps
@simonkim0321 Жыл бұрын
Clean!
@user-hh4hc2lt6e2 жыл бұрын
What’s that sensor on the side of the intake manifold, by the serpentine belt
@jgc00642 жыл бұрын
MAP sensor
@RoadsterAlex2 жыл бұрын
6000-10000 a budget ? Dude you can do this for 2k 😆😆😆
@rxtoy232 жыл бұрын
Where??
@RoadsterAlex Жыл бұрын
@@rxtoy23 by taking different products :) pulsar turbo etc
@rxtoy23 Жыл бұрын
Noo, I’m asking who did your build ? What shop ?
@RoadsterAlex Жыл бұрын
@@rxtoy23 shop? Diy obviously who gets their car build by a shop
@akuroakum89558 ай бұрын
Yes but will it look this clean?
@LTR450black6 ай бұрын
How is anything on this engine build a budget Garrett turbo turbo smart wastegate turbo smart blow valve fuel system I’m in the list goes on wire harness I don’t think it’s all 100% a budget build
@vangtk10Ай бұрын
You guys… 🤦♂️ Please look up what budget means. A budget is a price you set to not exceed. If your budget is $2000, then your price should not exceed $2000. If your budget is $10k, your price should not exceed $10k. Does that mean your $2k build is cheap? No. It means your build was based on a maximum $2k price. To someone with a $1k budget, your $2k budget is expensive. Does that mean your $10k build is expensive? No. It means your build was based on a maximum $10k price. To someone with a $2k budget, your $10k build is expensive. Don’t expect to get a $10k build by only investing $2k. That is a 80% discrepency. The math doesn’t math that way. Different parts, different labor, different prices.
@boosted__demon6852 Жыл бұрын
I haven't finished the video, I had to stop when you mentioned the price of the turbo. This is not a budget build, this is way overpriced.
@Cloudyy649 ай бұрын
😂
@k9deine3512 жыл бұрын
You call that a budget
@JavaughnDawkins19974 ай бұрын
He said it multiple times, when he said budget build it’s whatever your budget is, everyone budget is different. He literally said it at the beginning.
@k9deine3512 жыл бұрын
You could've got a used mustang for that much
@garyphloyngam7148 Жыл бұрын
Bro nice setup man I salute 🫡 i cant wait to get my eg