HOW MUCH SILVERFOX G37 BUILD COST (ALL MODS)

Thank you for watching! I really do hope the you guys enjoyed the video! Leave a comment down below for any suggestions on what you all would like to see on Chicago Lane Changers! Also be sure to like, subscribe and turn on our push notifications so you don’t miss out on another video! We really are growing in the Chicago car scene and we appreciate everyone that joined and supported the CLC Nation! We hope you enjoy your stay and like always.... We will see you in the next video!
Sponsors:
Auto Enhancement Pros
Bull Boost Performance
Star Auto Repair
KZbin channels 👇🏽
Chicago lane Changers : / chicagolanechangers
SilverFox Racing: / @wacko_5.0
Instagrams 👇🏽
Chicago Lane Changers: chicagolanechan...
Moogy : mahmoudhiresh?u...
Current build : Camaro SS 1LE
Mods ⬇️
BMR rear cradle chasis brace
BMR Rear cradle Front brace
BMR drive shaft tunnel brace
BMR twin Tube Strut Tower
MBRP axle back exhaust
BullBoost Performance Catch can
GM performance intake
Skip shift eliminator for TR6060
OLD BUILD AND MODS DOWN BELOW
Bolt on G37 Sedan
Q50 Carbon fiber shifter with (Q50 Boot)
Full Paddle Shifter Kit with Sport Bezel
Black 1 piece Front splitter / Lip
Carbon Fiber Duckbill Spoiler
Full Catback Exhaust (MotorDyne Y-Pipe) (Top speed pro mufflers)
Swift Sport Lowering springs (4N907)
Khumo 255/35/20 Super Ecsta PA51
19 inch XXR 599 GunMetal wheels
Stillen Gen 3 long tube high flow Twin Cold Air Intakes
Diode Dynamics Turn Signal Tail-light Rings
Akkon GT-R style L.E.D headlights with sequential turn signals
KSP Red Hub Centric Spacers (1 inch)
AKEBONO Brakes (Rotors and pads)
Carbon Red Steering wheel
AdminTune with 4 different maps. Including aggressive burbles ( Map 1 - Race ) (Map 2 - Burble) (Map 3 - Fuel saving economy )
(Map 4 - Kill switch)
Kinetix HighFlow Cats
Cipher Racing seats with TANAKA 4 point race harness
Sparco Harness bar
Fully custom engine bay
Full custom wrap
Equipment:
- 2 Canon EOS M50 with RODE GO MIC
- Canon EOS 90D
- GoPro Hero 5
- GoPro Hero 6
- 2 GoPro Hero 8
- GoPro Hero 9
- iPhone 11 Pro Max
Editing Software:
- Final Cut Pro
- Lumafusion
- iMovie
(All stunts, races, actions done on this channel are recorded in Mexico by trained professionals. It’s recommended that you not to try this at home.)
About us:
Chicago Lane Changers is a Entertainment Group founded on August 30th 2019 by Mahmoud Hiresh also known as MOOGY . He always had a passion for the automotive industry and thought why not mix the two and create his own brand known as Chicago Lane Changers (CLC). Mahmoud always says “if you work hard enough and grind your a** off anything is possible.” His vision is to bring different cars and different people and make them one in the car community.
January of 2022, Chicago Lane Changers has officially added a race team known as Chicago Lane Changers Racing & Performance. We have added 3 cars to the lineup. One being our Sprint / Track car, 1/4 Mile car, and lastly our Street car. We are really excited to race this season and we can’t wait to grow as a brand and as a team
#1le #camaro #camaross #camaross1le #camarosix #camaro1le #v8 #musclecar #tremec #savethemanuals #trackcar #chevy #chevrolet #chevyfamily #camarofamily #camaroworldwide #camaroclub #race #youtuber #subscribe #carguy #cargirl #cars #musclecars #sportcar #fast #track #race #Savethemanuals #g37sedan #g37x #g37nation #g37s #g37coupe #VQ #vqfamily #vqnation #fbo #twinturbo #

[@markmartin4720]

I watched this video about 10 months ago. Always a wanted a G and this video made me pull the trigger. Just brought mines 2 months ago. This is by FARRR the cleanest G on YT! I was holding my comment till I got one and I inspire to make mines jus a clean.

[@kayy_sowavyy2054]

Clean build bro fire video 🔥🔥

[@Savage-gi6fo]

I’m glad I went with headers install of just test pipes can’t wait how it sounds once I’m done installing them

[@darnel320]

I love this build bro . I model 2 of my Gs after this one w a couple tweaks

[@almightystevn4849]

Looking forward to starting my g37 build I just got mine a couple months ago, im also from the chi area

[@Fiftyshadesofgene]

Hi! Just curious if you still have the links for your duckbill spoiler and rear roof spoiler? Loving the whole look! 🔥🔥🔥

[@ezkoshows7136]

Yo brother, what size extension did you need for the 02 sensors when putting the headers? & where did you get them from?

[@louischeney3166]

This is one sweet ass ride I see a couple people ask we’re you got the front sport bumper can you tell us please

[@racova3663]

What 3” intakes sis you end up swapping to? Or thinking to get.

[@Cesar14mx]

I feel you in the start bottom lol

[@MrTrevorblack1977]

I have test pipe’s on my g35 Bahrain but it’s throwing a check engine light, I also have the extended bang but it throwing a code saying bad cats, the test pipe is 2.5 what do you think that I should do because I don’t want to take of the other test pipes because they sound good and the car feels quicker

[@Being_A_JOAT]

Hey How many miles did you buy the g37 when you first got it?

[@markslabrador6565]

Live in Chicago area and I have a 11 g37x. Can you recommend a good shop. Diagnostics and repairs. CEL issue, bluetooth, among others. Thanks in advance

[@internationalthing7490]

Where did you get the h7 high beam bulb?💡 can’t find none

[@smoogeezy22]

What kind of acura did you have... im thinking about getting rid of my type s

[@T4nku0ut]

So badass how you're into the DIY- esp with the headlights, that takes dedication How hard was the lip install? I've read of time estimates from 10 min to 3 hours lol

[@Wacko_5.0]

Appreciate it my guy. If I know I can do it, and it saves me a lot of cash, I take the effort to do it. The lip took me 5 minutes 💀💀💀 Drilled some holes in the bottom, lined it up, clicked the clips into place and that was it

[@TennisWorldSetPoint]

Only like 4 to 6 bolts for a lip install the main part in the middle my guy put it in using his tape. But call me 37 cus I went invidia cat back but I'm not trying to make stupid amount big noise as I pass my neibors and there expensive cars. I even took iorn wool scuffed up the cans the high heat matte black bbq paint covered the tips and painted my cans black using a high heat gun to warm up the muffler ad it takes the paint expand the metal when painting. 3 coats over 3days then I took rustoleums matte clear to go over it just once. So far several years and that paint is on there nicely and it actually looks OEM to anyone not in the know. Sounds like the coupe a bit more throat but the noise level gets that high in low rpm high RPM it is louder but I have the takeda cold air so it's hard to really hear but I'm not trying to wake the neibors when I auto start it vibrated the house. Noticed huge gains with my cold air. Not so much the cat but that flies nice at 60mph and up feels like there's so much more power to give abd I do t want to jan to gas down or it will just down shift then up shift violently when I can feel more out of just giving it more at gradual these cars are exilarating when going fast. I did it in my untefracsbd My rsx and my vigor abd jt felt like it was gonna blow I knew i had a tuned up motor gsr built fir every amount of punishment. But the stage 3csns sounded like the world was grinding to a halt these cars are like European cars the feel great going fast. I wish there was another gear. I messed the tsx fast one and that felt very good going fast but the intake on this u feel the air getting damned up that way as u go faster abd in a non humid night oh boy does it feel great handing is amazing. Suspension is fine car just liked to go fast. I once got 25mpg at 79mph

[@TennisWorldSetPoint]

Please I dyi everything so I learn rifles abd cars abd homes. KZbincis the university I attend. Abd when j ask a guy like questions I know it's ling but if u read my thing I'd appreciate u answering something's and I gave so e things I know that can help. I build ar*s and other carbines from parts because it's fun. I build bullet proof vests from different armours cus I know I can get the best results I have a shot gun ks7 video with 40k views. Cars us my second hobby. I used to work on cars more when it was Hondas and do Chevys. Now it's alot I never learned. So I really just tinker with the G. Anyone know where I can get a battery cover I lost mine installing a voltage regulator.

[@dashwave2610]

I have a 2015 3.7 Q50. I was thinking about doing a ls2 swap but before doing so I wanted to know how reliable it would be?l

[@justinkhayse5863]

Dope bro!! 🔥 🔥 🔥 U in Chicago bro!?

[@MOOGY1LE]

Grew up 63rd south Kedzie 💪🏽💪🏽💪🏽💪🏽

[@UncleWes]

My recommendation to stop the bleeding buy a project G to bring the life back to the channel

[@cooldaddyslick6869]

Assuming your front wheels are 8.5 inches wide then 225 is the correct width.

[@JustinBirdMusic]

Did you talk about cost at some point in the video? I can't find it

[@TECkHNOz]

Hey bro where did you Bought the bumper?

[@Wacko_5.0]

I said the grille is a satin finish. I meant to say matte finish.

[@j.chenmuas]

If gas prices weren't so high right now, I'd daily one!

[@louissmith1501]

Could u add links to all the parts u put on ur g

[@johnfarias7230]

Spent the last month and all the Infinity forms Has anybody seen power mirrors power seats and memory seats not working I have bought two modulus so far and they have not helped and a BCM

[@alihiresh5259]

This is hareeka on baby boy

[@officialyette7139]

New here is this the x ??

[@akixiii2235]

what year is the g37?

[@notaustinnmber1074]

Probably 2008-10

[@MAHDI-vz8pr]

let’s see the g vs the ss

[@SwervooShiestyYt]

No links🥺

[@blahblahblah607]

you installed the rotors wrong , left is on the right and right is on the left , rear ones are correct though

[@RyeCarter]

I feel like you need better stickers on the right side

[@rorodeoro4591]

Where can I find that sport looking front bumper ?

[@rorodeoro4591]

^^^ or lip added*^^

[@nedajuh]

Z1 motorsports

[@prestonarmy1]

@@nedajuh all they got is the IPL bumper

[@TennisWorldSetPoint]

I been watching u for awhile. There's another guy with a beard like u with a ,4 door he's all performance. I have a few stupid questions. At the end of this I'll list the questions so u can easily answer. I want headers but I'm fearing demon bolts don't have ling extensions. I want a tune but it's automatic. Also I really hate paying my price 93 grade for gas. So what tune is best. Joe can I get a few extra Miles this is a reason I never got big rims. I have invidia cat back because I am 37. So it sounds like a coupe. I have the takeada cold air with the same sorta carbon fiberglass grill and right I could have searched for a matte look. But I decided to go get the mirrors and gin to match fin got stolen so I just ordered a cheaper 90 dollar one it's not real carbon fiber Luke the one the someone tilled off that was 320. Custom made in Japan. So after that I'm done I just got a nice lip not too long so I dont hit the ground but after having it painted it makes the car look amazing. So in ur opinion I want the chrome delete should I glossy matte or satin. It's a slate blue car so I have to really find the best color and sun is a factor. I'm leaning at satin. Please tell me any trucks to do the job. I know u can think what u would have done differently. Heat guns rubber tools to push it down ????. Sorry I'm getting the fsmr crap the desk crap got taken and I. Not gonna keep getting something someone can easily steel. Don't judge it can be returned if it's that bad. I have the gtr style tails too with the double blinkers. U did a great job. They sell a jdm clear red. I bought it fir my gsr back in the day. I'm in NY so I can't slam this car the way I did with an integra and my 3 series. The most important thing is the coils or what u choose. So I want a ride about 1.5 inches lower with the same ride. I dont want to bounce I don't want to feel the struts bottoming out. So please suggestions. I literally busted to cut them inch my inch untill it settles that's ok with a gsr it's light comes with strong coils and great struts. How long did it take for the shift knob can h give sine instructions in his to do it. Agree with t10 leds and u do have to buy better quality ones if u plan on doing the corners which u won't but for OEM headlights u can't use the cheap ones that are square the rounded edge is better. I love people who are dedicated vti caring for this car. So if u were me and u had an issue with the seat leather the leather has come apart from the seat very center where you sit. And u have no idea who can help me repair this seat. Just like u I've dive alit I've installed extra lighting in the truck I've installed cameras. I have a voltage regulator which made the headlight brighter chrome is coming off door panels I might take them off then do a charcoal black spray then go over with Rust-Oleum matte clear. I already sprayed the shift knob but that was stupid I only did the chrome part but it just don't look right. If u have a 200 real duckbill I'll buy that. I'm just not spending 35O again. Custom Japan made. Took him 2 weeks then be had to mail it. So I thought it was a great deal then I saw his work and I couldn't comain I had him do the grill. After I sprayed it with 2m gloss to pretect it. Question. I heard carbon fiber ceramic pads are best. I really have tried so many. I've tried so many rotors what I can tell u is custom made ones that are just cross drilled and filled in geomet. Then I painted the hub part black then 2k gloss over it. Never rust also saves the brake pads. The slotted chewed up my pads never again. Study shows that cross drill will cool down the rotor u do not need to slot it. They have Bosch blue pads 45 bucks. 70 for the front in carbon fiber ceramic by power stops evolution. That's alot for just the front so are they worth it? We I do high speed flying and then I like to come down from high speeds so we're talking best for heat not noise not dust. Less heat upon braking will stop a heavy car going 140 down to 60 quick. What's ur opinion on pads. Abd if u had stock calibers because it actually stops well with these rotors and new soft organic pads. But they don't have that anymore it's a ceramic carbon fiber semi Metallic so which pads do I get?. Also lastly u can get a bigger interstate battery in that comp I've done it. If u answer me I can tell u the battery to get. Also I lost the battery cover u know where I can grab another hold job on ur videos ur one of the best. The one guy with the turbo he's crazy see this isn't the car to do all that. But u work on what u have abd be has a few cars. But. True enthusiasm. Like I just need a leather guy and help picking those right pads. Last week my entire light bulb housing on the rear plate just broke off. Rust. So I did a few things with black wood and double sided Velcro and it's holding in wrong. But rust is a factor as these cars start to age out. The biggest was the exhaust and the hangers. Next I should do headers it's getting them in man u need two people and very strong long shafts. I just have no idea if I can do this. I don't even know anyone with that equipment but maybe I go to speedworld or Unique or the famous one by Nassau college Colleseum. I know they used to film a show here with xibit. question: which color chrome delete gloss matte satin. Which tube gets best gas mileage and maybe a bit faster of the line I know that's not how it works so how bought what's ur fav tube and why. Gas is insane, which leads me to another question. Ok the tank is a quarter full more then enough had to do anything less weight. But the second I add new 93 fill up it feels like it's got more power. Why. Does the fuel rail need pressure with more in the tank? What break pads on OEM brakes should I buy with the fact that I like high speed slowing down. I've had them all I don't believe I've had the carbon fiber evolution. What's the best drop coil or coil over if I want to only drop an inch but maintain the feel of a normal gold car. No bouncy crap. Will u explain how to do that shifted thing I might just build one but I need a shifter that work to start off as and one without a button I heard can damage the transmission. I like that u think out the box so he'll me the middle of my first the leather came loose and now it's just under me not tight. Remember u can fit a bigger battery and u should get a good Japanese ⚡regulator it def helped me I noticed the lights get brighter claims it can get u better gas have no idea how. Have u ever had to do the ignition coils. There's so plug wires ignition plugs. There's a KZbin video by the other guy doing it. Have u done which brand vdjd u get? Can u get a 200 real fin. I'll return my 100 dollar phony. Last my own advice. Buy the best lug nuts u can. I had idiots at Mavis and speed word over torque then and if there just a hair off u have to the replace the studs. So I always take a but if clear gun oil and I bought the best mag lug nuts I could find. If u buy Chinese metal u will regret it's they don't care they use high power air guns and over torque it they have break bars. But they cover to it. Last the tpms. Light went on went to Mavis they were supposed to give me new stems seems like the didn't and plus these I heard are individual sensors so does it draw power from one slit it is there a battery waiting to die per sensor? And I heard u have to replace the sensors. I wish I knew more other cars have a central thing that is in the glove box u just put a better battery in that. Check the 4 valve stems for leaks. Did they clear it on me so I dont ever know u have a nail in my tire no light. What's ur knowledge in the matter? 🙏 Thank you

[@speeddistrictnyc]

Didnt he go boosted what Happend

[@framefragsgaming2942]

thats weird that you said stocka it did 6 seconds 0-60, because mine is stock and does 0-60 in low 5s.

[@Wacko_5.0]

Yea it’s really weird. I think it’s something to do with the fact that my stock cats had 123K on them and the stock cats are known to fail. As soon as I got the high flow cats I had before it got it into the 5s right away. That was also without a tune

[@framefragsgaming2942]

@@Wacko_5.0 Oh really thats interesting cause I have stock cats and my car has 130k miles on it... would doing high flow cats be super worth it and how much are those typically?

[@Wacko_5.0]

@@framefragsgaming2942 For power, it's not worth it because they cost a shit load of money and make some power. Test pipes are way more worth it because they make way more power and don't cost much. If you want to go nuts, get ISR long tube headers like I did.

[@framefragsgaming2942]

@@Wacko_5.0 ah very interesting I did not know test pipes added more power, will my car sound rice with test pipes i hear people say test pipes cause excessive pops even without a tune so.

[@Abood_311-]

Cuz his is awd

[@PLP357]

F the 5.0 get a Q60 s red