How Strong is a Pass-Thru Ratchet vs Standard Ratchet? Let's Find out

Today we will test if a standard 3/8" driver ratchet is stronger than a pass-thru ratchet. We will also show in the beginning the innovative pass-through design where a Pass-Through Socket Wrench Set allows you to tackle jobs that standard socket sets can't. The hollow sockets and ratchet heads enable threaded rod and bolts to pass completely through the tool for unbeatable access, virtually eliminating the need for deep sockets. This set is a must-have for your home workshop and comes backed by most manufacturers with a limited lifetime warranty for peace of mind.
Enjoy the ratchet torture test and may the best tool always win!
TEQ Correct Professional 3/8" Drive Teardrop Ratchet Part # TP81211F $24.99
shop.advanceautoparts.com/p/t...
84 tooth gear offers a 4.3 Deg. swing arc for easy access, Meets or exceeds ASME specifications, LIMITED LIFETIME REPLACEMENT
HART 16-Piece 3/8-inch Drive Pass-Thru Socket Set, Chrome $21.97
www.walmart.com/ip/HART-16-Pi...
The HART 3/8-inch pass-through socket set is an amazing addition to any DIYer’s toolset. This set includes an innovative pass-through design ratchet with a low-profile head that makes tackling jobs in those tight, hard-to-reach fasteners a breeze. This pass-through design makes getting to fasteners that deep well sockets cannot reach possible. The ratchet and sockets in this set all come with a full chrome finish to provide durability and rust resistance. This set includes (1) 3/8-inch drive pass-through ratchet and (7) SAE sockets with sizes from 3/8-inch to 11/16-inch and (8) MM sockets from 10mm to 17mm. All tools in this set come in a compact, organizing storage for easy storage and portability. All tools included in this set are covered under HART’s Limited Lifetime Warranty.
Pass-thru design allows for access to fasteners that deep sockets cannot reach
Low profile head for more access in tight spaces
Chrome finish for rust resistance
Comfort grip with non-slip grip
Includes: (1) Case (1) 3/8"DRIVE PASS-THRU RATCHET SAE SOCKETS (7) 3/8 7/16 1/2 9/16 5/8 11/16 3/4 MM SOCKETS (8) 10 mm 11 mm 12 mm 13 mm 14 mm 15 mm 16 mm 17 mm
Specs: Drive Size: 3/8" Point: 6 Point Type: Pass-Thru Finish: Chrome Measure Type: SAE and Metric
STANLEY STMT74900 16-Piece Pass-Thru Socket Set
Take on your next DIY home improvement project or repair like the pros with the Stanley Pass-Thru Socket Set. This set includes a range of 15 socket sizes, so you?ll never be left in the lurch midway through a project again. The ratchet?s ergonomic grip is designed to give you maximum control as you move and maneuver the sockets. Whatever your skill level, the Stanley Pass-Thru Socket Set will help to make quick work of your next project.
Stanley 16-Piece Pass Thru Set
Great tools

[@SebastianLong]

I bought a Craftsman pass through ratchet when they first came out. I've broken many ratchets by putting a breaker bar on it but never had the handle itself bend till I used the pass through. Needless to say I knew right away how strong they are. I still use my pass through set of ratchets nearly every time I need a hand tool.

[@matthewasteele]

Yup my craftsman max access, has lasted me 8 years one of the best tools I ever bought!

[@NeasYellek]

Would like to see compared to harbor freight and snap on pass through ratchets. High end vs low end

[@michaelb2226]

Hart is Walmart. Can't get any lower than that besides hyper tough another Walmart brand.

[@richardhinton4232]

I can't speak about their pass through ratchets but I had a family member buy me a huge collection of hart tools from Walmart a bunch of sockets ratchets and misc tools I can say for a fact their ratchets and sockets are nowhere near snap on or mac ive pulled on hart sockets barely at full strength and had the head of the socket just spread open untill it can no longer continue to grip the bolt

[@outdeparture]

Shoot project farm the idea!

[@randombuilds8336]

The hyper tough pry bars are good. Made in the US and other than branding the same thing other companies sell.

[@JTB128650]

Hart is garbage. It belongs in the garbage. 🤣😂

[@msiig6476]

Dude, rule 1 in using pipe extension, is put pip all the way to rachet head.

[@casparv]

Not if you also want to see when the handle will break off

[@msiig6476]

@@casparv well it dosnt show that either, if you do it like that, you are putting All the force on one point, and thats why the handle starts to bend. Thats also hos a bending machine Works.

[@Momentaryghost]

This was my thought to he seems to grab by hand at weird spot also on a few tests I've seen, maybe to make a certain brand look better or worse idk

[@nicholaswood105]

@@msiig6476 to the point of failure means any failure

[@msiig6476]

@@nicholaswood105 Again, the way he is using the pipe, he is creating a bend with only 2 contact points, it's not the way to do it, and shows nothing, the force on the second point of contact, is HUGE, and evere handle where the ratchet is not total crap, WILL bend. He is creating the failure point, by doing it this way.

[@chevalierdeloccident5949]

I like how the pass thru ratchet holding mechanism wraps around the socket firmly as opposed to a regular ratchet putting all its faith on a small anvil. It's crazy to me how the anvil ratchet is the "regular" one when you realize this tiny little detailed contrasting the two.

[@EDUARDCORE7159]

I never thought that socket would survive lol. Didn't expect this results

[@ClientGraphics]

The pawl usually wedges in the sidewall and lets you lay some serious torque down and self destructs. Ratcheting wrenches will usually do the same, one and done with too much torque.

[@travisdaniel1880]

This guys video quality and how he explains everything is great. Usually when you see smaller channels like this are very low quality and low budget but this couldn’t be any further from that

[@ClientGraphics]

Thanks man! I always try to bring something different to the table as the channel continues to grow so do the possibilities👍

[@Sjackson2369]

Another application for these, is using it on struts where you have to turn a bit and hold the threaded rod at the same time.

[@shawn7889]

I totally imagine a couple of buddies seeing who can get "the highest score" with that device you're using to measure torque

[@ClientGraphics]

Maybe.....

[@RickyX64]

I knew these were as tough as regular ratchets. I've been using the Pittsburgh one since it came out. It's made in Taiwan and has a comfort grip. Excellent quality.

[@mikefinto4048]

Lifetime warranty best thing about them

[@user-xe9ue2jr2w]

Which level is it? Is it the Pittsburgh Pro or is it just the 1st level Pittsburgh ?

[@mikefinto4048]

@@user-xe9ue2jr2w imma say first since its been forever ago, they just came out with the newer version

[@user-xe9ue2jr2w]

@@mikefinto4048 thanks ,when you said Taiwan 🇹🇼 that's usually the Pittsburgh Pro. I like the idea that it was made in Taiwan and not the ccp.

[@RickyX64]

@@user-xe9ue2jr2w It is just branded Pittsburgh, but the chrome finish, fitment, are the same quality as the pro. It has the Snap-On style comfort grip, but in green and black. look up some KZbin reviews, it is actually one of Harbor Freight's best ratchets even though it is not Pro or Icon.

[@wim0104]

Please do this again with Crescent and Gearwrench Pass-Thru :-)

[@CPthetooladdict]

Very cool video man would have never thought they would be that though!! Pretty frickin amazing!! I'd like to see what the gearwrench one does

[@brotherbrian1]

I picked up the Hart set. I figure you can't go wrong for $22, as little as I need it. Seems pretty solid.

[@colinmckim4515]

I have a Crescent pass through set in the handle of an adjustable wrench. It's been handy to keep in my vehicle or toolbag for unexpected repairs

[@JuanCruz-mj3cu]

just the vid i needed,Two days ago I needed one which I didn't have. Now I'm looking for a good set and I think I just found it.thanks for the video👍🏻

[@gmanchurch]

Really great video and thanks so very much for sharing that with us!

[@MCEngineeringInc]

Great video! Love that socket with the real time torque output. 👍🏻👍🏻

[@ClientGraphics]

It’s honestly the best and sets the bar really high. It continues to take the tool abuse and definitely works well.

[@SimanSlivar]

Not going to lie Ive been fairly impressed with the new walmart tools

[@jimeagle1155]

Hart is made by TTI Tools, they also.make Milwaukee, Ryobi and Ridid.

[@bengkelbawahpokok6753]

I don't think there will be any situation where you will really need a pass through ratchet. A box end will do just fine in your example situation, and if you need ratcheting action, you can always grab the ratcheting wrench

[@brianfischer5609]

I used mine for my tensioner pulley, because it was too tight of a space for a normal ratchet to fit. They do have their uses. I only bought it because it was on sale for $12

[@joshuaclark3926]

I use my Cobalt set on the pipeline to do tighten up dresser couplings for gas pipe a normal deep well is not deep enough for the long bolts

[@joshdane5657]

I use mine to adjust the valves on my honda lol it's perfect for putting a flat head through although a wrench works fine but busts my knuckles everytime. And I'm too cheap to spend 40dlr on a valve adjustment tool

[@j031drumr]

Recessed nut on a long stud with no clearance for box end wrenches

[@machscga6238]

You must not do any automotive work on trucks or heavy equipment

[@georgedobbs9216]

Personally, I would have preferred to see a better pass through ratchet. These are pretty much the cheapest possible versions of pass through ratchets. Gearwrench makes great pass thru ratchets. My old craftsman pass through ratchets are super heavy and heavy duty. I could be wrong, but I can't imagine Hart tools and Stanley are the best examples out there.

[@ClientGraphics]

Future video maybe..... Just depends on if this video does well enough to buy more pass-thru ratchets😉

[@donotrobme9295]

If those r the cheap o pass thrus then buy those. If u want a name brand u should be able to buy any and do better. Amazing video!

[@wim0104]

@@ClientGraphics try the half inch Gearwrench set, especially the flex head!

[@0002CJ]

You should try the Gearwrench pass through ratchets

[@9HighFlyer9]

I bought a gearwrench passthrough set about 20 years ago when I worked at NAPA. I couldn't really afford it but had charged to my employee account. That was my go-to ratchet until it got stolen a coupe years back. So for at least 15 maybe 17 years it survived heavy diy/neighborhood mechanic duty.

[@TheWriterforhire]

I owned one of the Stanley sets and really liked the six-point ratchet, sockets, and great handle. I was only able to find more socket options with Bostich. Stanley's warranty is great but you do have to mail it in (maybe Walmart if you bought it there?). The packaging for this pass-through ratchet is only good for the store, not the user and I recommend the way Kobalt did its pass-through sockets with the removable trays; but add some small magnets to the bottom and the Kobalt trays are perfect. Great video!

[@jodyrolandconstruction6577]

I own the gear wrench 1/2” bolt through. I’ve actually stood on it before to break a 1” bolt and nut. Been using it for several years with no issues. Also it’s the floppy head ratchet.

[@theTrend7]

Thank you for the video, pretty helpful

[@poptya]

I still have my Kobalt pass-throughs from when they were sold at Lowe's, Never had any issues.

[@user-so7dj3tw4d]

I got that Stanley and it's awesome love that I can use the sockets with a 15mm or 17mm i forget which but i can use them with my torque wrench too.

[@CorvetteTrev]

I have the crecent one, and the Gearwrench one for a belt tensioner kit. lol everyone's luck when watching failure tests. I love this channel 🎉

[@bazkeen]

You seemed very proud of "the nice clean break of the anvil'"🤣🤣 Enjoyed that👍🏻

[@ClientGraphics]

In my head I was thinking this tool just did as good or better than the similar GearWrench and produced a sweet spark on destruction😱

[@bazkeen]

@@ClientGraphics 🤣🤣🤣🤣

[@mrmyorky5634]

Many many years ago I was lucky enough to be taken on a school trip to visit Stanley Tools Engineering in Halifax. Apart from being impressed by the beauty of the tools, my abiding memory is of the man with a wonderful Yorkshire accent who had been showing us around then asking us all to turn out our pockets on leaving. The teacher that was with us looked horrified, but we all thought it was great. For my 21st birthday I was given a set of Stanley Chisels which are still in use today some 65 years later.

[@michelhadid]

Love this videos! Keep It Up!

[@melgross]

I recently bought the Gearwrench pass through 1/4” and 3/8” sets, and the set of Allen, torx, flat and Phillips bits for them, metric and inch in the set. The wrench sets also have inch and metric. They both come with adapters for standard 1/4” or 3/8” depending on the wrench kit size. I much prefer the heavy duty cases of the Gearwrench. I don’t test my tools, but I’ve never had one break. I know some guys take no care of their tools, and over torque them, then they break. I’d just rather just get the proper tool.

[@dummkompf]

@ 10:30 lol I'm cracking up at the thought of you showing that to someone who doesn't know much about tools and telling them you bent it by hand when you had to get a bolt REALLY tight

[@jacksmith2315]

Ive had the cornwell pass thru set for like 10yrs now. I actually have 2 of them since i found a second set really cheap. I love my cornwell pass thru sets. Smoothest and least backlash ratchet ive ever used. Its not a flip switch to reverse, you flip the whole ratchet/put the socket through the other side so i imagine that has a lot to do with how smooth it is and probably gearless

[@Landry_Houston]

that teq ratchet is literally an exact replica of the gearwrench 84t ratchet

[@Knifeaddictdillon]

Glad to see you do another video like this. Haven't seen you break any ratchets in awhile. Do you warranty them after you break them?

[@ClientGraphics]

My wife told me it was time and that I needed to break some things so I didn’t forget how to. It was like riding a bike 🥰

[@Max_Arjona]

Just found your channel, subbed after checking out a few videos, I like your content! Definitely an odd name for a channel of this nature though.

[@woodworkerroyer8497]

You should get ahold of the Crescent pass thru. The one that is also a crescent wrench and pipe wrench (this last but is the movable wrench jaw with teeth on the back and supposedly can be used in a pinch for a pipe wrench.

[@ClientGraphics]

I saw them and they seemed slightly gimmicky to me, but could be useful to someone that wants a multi-tool to attempt to replace a few tools in one.

[@marioman971]

They will in fact work as a pipe wrench, tested and confirmed lol. If you don't like the multi tool aspect they make the X6 in regular pass thru ratchet form as well

[@woodworkerroyer8497]

@@ClientGraphics I have one BECAUSE it claimed to be a multitool design. My problem with it was not the "pipe wrench" or the odd handle that you get if you use the ratchet, but the fact that the coating of paint or die is absolutely the least rustproof coating I've ever seen. I had it get misted on once and it had 10 or 20 spots of rust on it... I just think it would be interesting to see how it works, if Stanley, of all the tool companies, can make a 325ft lb pass thru!

[@wim0104]

that combo thing is annyoing.

[@saturnmedia1]

Great video! It would have been great to have seen the internals of those ratchets after. I don’t know if those were sealed units though.

[@ClientGraphics]

The pass-thru are sealed with an internal snap ring. The Tech Correct Ratchet was flawless internally so nothing to see really. The Stanley was really deformed and I could probably knock the internals out on the vise with a few wacks on a punch.

[@amoscardoza5253]

Yo Chris! Great vid bro! Was wondering if you ever tested the Japanese Nepros ratchets? I guess there supposed to be fantastic. Hope all is well and have a great weekend

[@Mixwell1983]

Dont have a pass thru ratchet but i have double boxed end ratchet wrench set from HF.. they work well when the situation calls for it

[@whysoserious7014]

Same good saying I've been been saying for years "work smarter not harder".

[@YungSteambuns]

The gear wrench pass through ratchets are AWESOME I own the 1/4" and 3/8" sets, theyre xtra-long handle, locking flex head, very low profile and obviously pass through But what's also super sweet is the set comes with a locking adapter that allows you to use any of your normal sockets

[@wim0104]

their half inch flexhead is awesome too; great around trailers.

[@melgross]

I agree. I love mine.

[@YungSteambuns]

@@wim0104 yeah well the 1/2" costs more than the 3/8+1/4 combined 😂

[@miket7390]

Menards makes a 1/4 and 3/8 set that I think is the most complete I could find. It's masterforce but pretty sure it's made alongside the gearwrench.

[@williamgates4399]

I purchased a Kobalt pass-thru ratchet kit. It includes a 1/4 drive. 3/8 drive and 1/2 drive ratchet. Has both SAE and metric sockets with adapters for various applications. Had this kit for about 10 years ago and no issues. Nice case it comes in and I store it in the bottom drawer of my toolbox. Get it out and take it with me. Would like you to test the Kobalt pass-thru 3/8 ratchet.

[@168grhp]

Crazy how strong those passthrough ratchets are!

[@meagaindave2049]

Yo Chris! Thanks and God bless!😁

[@TJsVette]

What about the craftsman? I've had mine for several years and they still work great

[@csimet]

I have the Grearwrench Pass Thru 1/4 and 3/8" sets (still looking for the 1/2" set - hard to find). Well made, but I was really surprised pass thru sets can handle the load. Typically I would not try to use them under high stress situations, but it appears they may actually hold up just fine.

[@dreadswizzard9142]

the half inch set doesn't even show up on their website.

[@csimet]

@@dreadswizzard9142 It has been unavailable for a while... and very hard to find. I've been trying to get my hands on a 1/2" set for more than a year now. You can find some of the individual sockets, but the set and individual handle are next to impossible. Not sure why, since the 3/8 and 1/4 sets are popular.

[@deanbudgell6220]

Use my pass through all the time when changing struts and sway bar links. These things work awesome for those jobs. My only complaint with them is that the sockets come out of the ratchet quite easily.

[@kingsporttoolreview8703]

Interesting video Chris, (thumbs up as always) .....Personally, I've never owned a pass through ratchet set. I've looked at them several times but never bought one because I just can't see the value of one of these sets If you own a set of ratcheting wrenches that already accomplish the exact same task.

[@jonmeray713]

Kingsport Tool Review i find my matco ratchet wrenches thinness really hurts the hand when putting torque on em

[@garycorbin2789]

I love the flexibility of having both sets , you Cant have too many tools

[@qqslp]

Its pretty obvious.... These can do literally everything that a regular ratchet can plus they are more compact.

[@whatfreedom7]

I have a old Matco pass through ratchet and air ratchet set from over 20 years ago. I’ve never had any issues with slippage or strength but I did loose a retainer clip in the ratchet which is no longer available. I had this before I ever saw any type of ratcheting combination wrench that we have today,

[@seanwallace1972]

Hi are these suitable tonne used on like a shock absorber top mount where you’ll have a nut on a thread and on top of the thread you have a Torx or Allan key?hope you know what I mean

[@tishbrett]

Been using ratchet spanners for years sidcrome and kingcrome and some Stanley great for long threads

[@toolinhand]

I am shocked that those pass through ratchets did so well. I have the Stanley one, and I guess I can work on semi trucks with it? Haha.

[@UltraGamma25]

Gonna buy some Husky pass throughs for those annoying ball joints.

[@passion830217]

I have a gearwrench 3/8 pass through (the long handle set) and a 1/2 pass through set. Both of them claim 40% stronger than traditional ratchets by eliminating the drive tang. It is great if we can see how they will stand up to the test. I believe the 3/8 gearwrench one is stronger than the ones you tested.

[@donotrobme9295]

Great vid. Do u have one like this for ratchet wrenches? Very interested. Thanks!

[@ClientGraphics]

Only a very old one which is a 10mm standard vs 10mm ratcheting wrench. They are both not common brands so I should put that on the to do list sometime.

[@Zack-dk3pt]

stanley surprised me but not as much as the 3/8 inch bostitch ratchet i used with a cheater bar to take off a lug nut. it survived and worked as normal ever since.

[@oldguy2082]

Stanley has a come a long way in their ratchets. Used to be if you wanted a cheap set for your car or truck, you bought a Stanley set at Walmart, threw away the ratchets and replaced them with something else, i.e., Power Torque, GearWrench or something else. I've broken several Stanley ratchets, put some standard GearWrench in place of the Stanley and the work just great. The Stanley sockets seem fine, no problem with those, but it is good to see that the Stanley ratchets today have much improved build quality.

[@EXPENDABLE50]

Wow that stanley one is impressive

[@werksalot]

I have one of the first Stanley pass through ratchets I bought off the MAC tool truck back in early 2000's . The Torque rating was not as high as the one you showed . Not sure what the rating is though . I also have the Matco Pass-through ratchet sets . Both still work fine .

[@southerntommygun1353]

I have a Craftsman set that has served me well and I never expected it to take as much abuse as a standard set. But when you need one of these there is absolutely nothing else like it.

[@chevykamara2687]

Do the crescent pass through set

[@robertfrate9738]

Hi Chris, I got a blue plastic peace with a socket set, any ideas what it is?

[@pollydor07]

Thanks

[@joshuazick]

I have the kobalt version of this and I was wondering about this after seeing videos on another channel. It seems that the failure point for a normal ratchet is the square drive, the passthrough eliminates that.

[@adriant815]

Bought some Duralast pass through from autozone to remove shocks from struts and man when you need them you need them!

[@ClientGraphics]

The Duralast one’s are really similar to the Husky from Home Depot.

[@nickshowsstuff435]

Could a ratcheting wrench do the same job? Or was the size of the nut super big?

[@adriant815]

Nick Shows Stuff actually the nut was recessed where a normal wrench or ratcheting wouldn’t reach. Yes it would pass through but the top mount of the strut was in the way still

[@BlakeMcGuire]

I'm pretty impressed. I figure the 3/8 ratchet may be designed to shear though to protect the internals. Lots can be repaired fairly easily

[@donotrobme9295]

This is your best video in terms of results. The Stanley pass thru beating snap on ratchet. I have never met a Stanley fan boy but know several snap on fan boys. What say u

[@ClientGraphics]

I know a few Stanley fans but most of there stuff is older and I have a good amount of Stanley stuff myself. I can’t justify a SnapOn/Blue Point pass-thru ratchet set but a good set of reversible ratcheting wrenches to me are just as good. Some of the Astro stuff with the nano sockets would be very similar to a pass thru set.

[@donotrobme9295]

Marshall W thanks

[@richb2229]

I have the HF pass through. It isn’t as strong but the sockets work with an 19 mm wrench.

[@bsowhat]

Can you test Pittsburgh and Gearwrench pass through ratchets?

[@aterack833]

I was hoping you would test the Stanley after failure, it seemed like it was doing the mastercraft failure mode of switching to loosen automatically, you have to tighten something then switch it, and those mastercraft ones suck to switch modes from new even so there’s no telling if it got harder

[@carlseiler6441]

I wonder how they compare to a set of ratcheting wrenches. I have a set of metric and probably covers most of my use cases. However they are clearly not as comfortable. I wonder how strong they are. Have you tested them before?

[@xomnipresent]

Great for removing top hats off certain types of struts when air tools aren't accessible

[@TheJacjac129]

10:17 a metal shaving fell out. Is it from the socket or the internal mechanism?

[@22Platypus]

I keep a Pittsburg set in my car, so that way I don’t have to have a short and deep socket set. Very nice

[@kenyatta932]

Bro can u stress test the cresent pass thru ratchet?

[@asterios4888]

Can you do a comparison of Stanley pass thru ratchet and the gearwrench one. Pleaseeee!

[@travisnorton9288]

I would like to see you do a test on the pass though ratchet me and my family use most which is the titan exo-drive set

[@rmkscrambler]

If you can get a hold of one you should test the Micro-Tough Ratchet that was once sold under MAC, Stanley, Husky, and Proto brands. While they were one of the strongest and smallest ratchets you could buy they had one flaw that took them off the market. Dirt easily got into the works and made them free spin. This knocks them out as a daily driver but they are still great for tight spaces.

[@ClientGraphics]

I have both the Stanley and Husky versions and they worked great up until that first few lockup’s or slips and then you couldn’t fix it. I have another Micro-Tough ratchet without a handle that I may sacrifice one day.🤞

[@rmkscrambler]

@@ClientGraphics So if the issue is oil or dirt which is most common. They can be fixed. If you take a box cutter and pry up the front of the switch (opposite the handle) their is a hidden snap ring. Take a second box cutter and run it down the side of the thumb portion of the switch and you should be able to hook the snap ring and pull it out. Once you have the snap ring out you can carefully pry up on the front side of the switch until it comes out. Now you can pull the guts and clean them up and re-assemble This usually fixes the lockup and slip issue. Watch the de tent pin it will fall out. Also it has to be installed via the hole in the switch during re-assembly. I have a full set 1/4",3/8",&1/2" that I purchased from Mac 20 years ago the 3/8" is the only one that has given me trouble probably because its the most used. Every time it does I clean it and it works again.

[@boosted2.4_sky]

People have knocked Stanley Tools for years but I have always had success with them ....yeah the pliers are small the screwdrivers are chincy and the ratchets don't have very long handles on them... but they work! another reason why my hand tools sets that I keep in my vehicles are DeWalt because one thing that Stanley Black & Decker does do fairly well and my opinion is make good hand tools.... and bits...

[@ccadama]

@ClientGraphics. Thanks for the testing of these pass-thru ratchets. So Chris. Are you going to try and get warranty replacements for those two ratchets? Hope you and your family stay safe and well.

[@ClientGraphics]

Possibly the HART to see what the warranty process is like and let others know. Maybe I should do a warranty video.

[@whatisGodreallylike]

Good info; but a hardened 5/8 in. SAE J429 Grade 5 bolt's Tightening Torque is only 150 ft. lbs. for course thread and 170 for fine thread. The bolt should break before the ratchet.

[@oooooooo-bi5ih]

Do Gearwrench vs Pittsburgh pass-through

[@user-xe9ue2jr2w]

Do the warranty replacement on the tools 🔧 now for the Hart,Stanley and Teq .

[@tkskagen]

Yeah! Thank you for testing these two Pass-Through Ratchets, there are alot of Manufacturers that make these, but who made it FIRST? Take care, 🤓 -Thomas

[@boosted2.4_sky]

Chai Yu Chen filed for and received the first patent for the pass-through wrench in Taiwan.... when looking at the exploded drawings of the wrench it looks exactly like the Pittsburgh pass-through socket wrench and set

[@ssvirk12]

I broke 3/8 drive on my ratcheting breaker bar. Wonder if it can be replaced or repaired....?

[@sirkdopsah1081]

That Stanley pass thru ratchet may be the greatest thing ever made in China.

[@nitrous07me]

I’m gonna but that gearwrench pass through one, it’s got a better handle & locking flex head

[@ham7053]

These tests I guess are practical if all you care about is putting pipes on things and putting way more torque on them then they should have. But hey, gotta test everything about em. Including when they break lol

[@JD-mo4fv]

Gotta test Cresent tools pass through rachet

[@rockytoady5875]

Why didn't you test the harbor freight one I use it at my shop all the time and it's great

[@josesoto9099]

Pass threw sockets are life savers for belt tensioners on hondas

[@The3chordwonder]

If you think about it, many of the ratchets failed at the 3/8 neck, so I wasn't surprised that the ones that were not limited by that (e.g. passthrough) performed much better. I'll be honest though, I think I would just pay a little bit more and get a full set of ratcheting box end wrenches so they are as thin as possible, negating the socket completely. Keep up the great work! As silly as this sounds, it would be good to see some testing on #2 phillips screwdrivers. How much toruhe they can take before camming-out and slipping. Obviously, you would have to put a wrench on the neck - something that not all screwdrivers can do. I have some cheap harbor freight #2 bits for my impact driver and they cam out and/or crack fairly easily. I bought some makita ones that have a gritty coating on them, and they work way better, last a lot longer before they start camming-out and slipping (Happens when the gritty coating wears off). Most of my screwdrivers are older and don't have the gritty coating, so all of mine are pretty lousy.

[@jonmeray713]

T Chord thin wrenchs hurt like hell

[@The3chordwonder]

@@jonmeray713 Agreed, but if you only got half an inch of width to squeeze a wrench in there, you gotta do what you gotta do. Usually and thankfully those are M6/10mm head bolts that don't require a ton of torque.

[@HTES962]

Having less offset makes it stronger?

[@davefoc]

I carry an old craftsman ratchet set in my general purpose tool box. I do almost no work on cars and I don't use the ratchet set very often and then when I might use it many times there is a bolt that sticks out too far for it. These pass through ratchets look like they might be much more useful in a general purpose tool box than a standard ratchet set.

[@davidsteinfeld9123]

some years ago I bought my first pass through socket set at sears and then my 2nd at the home depot some some time later of the big troubles are both say on the packaging that they have a life time warranty that no one seems to honor to thise day I own 2 sets in my craftsmen branded set I broke a rachet and can't get it replaced with ther life time warranty now my home depot set still runs strong no problem with it yet but a very strong point is I can use parts from both kits to work with any parts of the other what I will like to know is who realy makes them for our would be tool sellers so we can get service on what they make like who is the company that is sending out sourced materials to be assembled in China or Taiwan so we can go about getting new if broken forever is a no longer thing I do like thes tools at a time I thought was a gimmic but they are quite practical can you help with this problem thank you in advance

[@muhammedaflah7920]

Is stanley is best brand in tools

[@huffingfarts]

I bought a kit from Harbor Freight for hanging unistrut with 1/2" threaded rod. Made life so much easier.

[@franstemel]

Can you test and compare with “wera" tools?

[@DevinShillingtonSkateboarding]

I got a pass through socket set for christmas. My simple review is "cool but unnecessary". While I definitely won't complain about having them, they aren't something I would ever buy myself. I do use them, but I have yet to use them on something that I couldn't have used a normal ratchet on.

[@ratchetwise440]

Cool . Souped up , superduty ratchet wrench !