How to : 2002 Ford Ranger Ball Joints

  Рет қаралды 50,260

David Reyes

David Reyes

Күн бұрын

Пікірлер: 39
@paulnicholson8524
@paulnicholson8524 4 ай бұрын
He can do this stuff blind folded. Way to go guys keep up the good work! All in all you tube rocks. Be safe out there and GOD bless all of y'all's families.
@KennyP88
@KennyP88 2 жыл бұрын
Really liked this video a lot. The guys having a good time messing with trucks. I'm going to do my own front end work on a 2004. Thanks guys.
@kenschnorbus5730
@kenschnorbus5730 4 жыл бұрын
Thx Backyardbeans, this is exactly what I will be doing tomorrow, and probably a little better than what I and my brothers will look like. Good video to understand how to do it yourself instead of paying $120 an hour to get it done.
@paulnicholson8524
@paulnicholson8524 4 ай бұрын
True you tube rocks.
@michaelcarletti766
@michaelcarletti766 4 жыл бұрын
great vid! and nice to see young people doing some hands-on stuff..not just older ones! good job to all of you
@polskikraj1
@polskikraj1 Жыл бұрын
Very Helpful 🔧
@denniswilkins4514
@denniswilkins4514 8 ай бұрын
Lived the vid.
@alsautner1732
@alsautner1732 4 жыл бұрын
Funny and good...you made it look easy...!
@kountzer
@kountzer 4 жыл бұрын
I bought a 2002 ranger about four months ago. It makes a rusty door hinge noise every time I sit down. I think it is the ball joints. I hope that's all. Probably need to rebuild the whole front suspension. Watching this video helps. Thanks.
@davidreyes8226
@davidreyes8226 4 жыл бұрын
Yeah could be the ball joints, but may also be the coil overs, when they get worn out and dirty they make noise. Atleast from my experience
@kountzer
@kountzer 4 жыл бұрын
@@davidreyes8226 Thanks.
@1Patient
@1Patient 3 жыл бұрын
😀😄😅🤣 Big Mike, focus here... we're gonna pull this shit out... 0:53 Remind me to not take any advise from you guys...
@korte1978
@korte1978 5 жыл бұрын
More Ranger how-to's from the Backyard Bros (I'm not typing Bean's) This is a good how-to video for real. Funny shit man... also convinced me to not do my ball joints at home.
@thatguythatdoesstuff7448
@thatguythatdoesstuff7448 5 жыл бұрын
Sometimes you gotta do what you gotta do. Gets the truck back on the road.
@andytaylor6781
@andytaylor6781 2 ай бұрын
Big love
@edp9517
@edp9517 Жыл бұрын
😂😂😂😂 fuvk yeah boys !! This helped perritos ❤
@israelguzman2622
@israelguzman2622 6 жыл бұрын
good video bro,
@kencromer1065
@kencromer1065 5 жыл бұрын
2006ford ranger ball joints are upside-down is that right?
@Denis-bo8ms
@Denis-bo8ms 6 жыл бұрын
Would 1999 ranger be the same parts bro?
@stonehenley2210
@stonehenley2210 5 жыл бұрын
Thanks for this video.
@paulnicholson8524
@paulnicholson8524 4 ай бұрын
I got a 2000 with 150,430 on it with the same problem.
@jimmydavis8009
@jimmydavis8009 4 жыл бұрын
Another reason why not to do meth. WIDE OPEN at 12:30 AM attempting to show how not to change ball joints on a ranger. Lol
@LetricShave
@LetricShave 5 жыл бұрын
You didn't show how to pop the lower ball joint out of the steering knuckle. They are usually frozen in there and don't magically pop out on their own.
@johnwhite192
@johnwhite192 5 жыл бұрын
Is upper ball joint removable?
@davidreyes8226
@davidreyes8226 5 жыл бұрын
Yes
@johnwhite192
@johnwhite192 5 жыл бұрын
@@davidreyes8226 do you happen to have the part number? I really don't want to waste my money on the whole are again if I don't have to. But every one looks at me like i got ten heads when i ask if its removable. Auto parts stores don't put that in the computer i guess. Very nice press u are using one day ill get one. But i did my lower joints with couple of big sockets and a c clamp and little creative thinking i had joint half way in with c clamp but it wasn't going any further so i put wood block under joint made sure straight lowered truck and let weight of truck press joint in. It worked took about day or so on each side but it got done no press. I wouldn't recommend it though. Fyi inner tie rods you don't need a special tool there is enough room for wrench i bought blue point iner tire rod tool and I really didn't have to. Next is snapon joint press. Please sent part number to the control arm with removable ball joints i really appreciate it. Great video.
@davidreyes8226
@davidreyes8226 5 жыл бұрын
I would need more info on your vehicle. but you can always just google it yourself. or look it up on the auto zone website. or even possibly on amazon @@johnwhite192
@toddbob55
@toddbob55 5 жыл бұрын
Should have bought Original/OEM parts... Aftermarket ball joints last 20k miles and OEM ball joints last 200,000 miles or more.
@jeffreyplumber1975
@jeffreyplumber1975 2 жыл бұрын
todd bob im kicking around which ones to get. my truck just hit 200k but the oem dosent have grease fitting but Ill find a good USA with grease fitting
@joetheman357
@joetheman357 6 жыл бұрын
The lack of vids on how to.do.this on a 4x4 ranger is irritating as hell
@simonammons5197
@simonammons5197 6 жыл бұрын
Joe DiCocco does the top ball joint come out the bottom also?
@577buttfan
@577buttfan 5 жыл бұрын
I think there pretty similar,the drive axle should just slide out after you remove the axle nut.
@1337penguinman
@1337penguinman 4 жыл бұрын
This is how these jobs ACTUALLY go. None of this clinical environment youtube nonsense.
@mikedavis9923
@mikedavis9923 5 жыл бұрын
Torque is 3 pumps on the impact.... Gives it 17 ??? Lol
@richmel6245
@richmel6245 6 жыл бұрын
Funny..what not to do vid..
@OscarMartinez-kg7tl
@OscarMartinez-kg7tl 5 жыл бұрын
Safety first No safety glasses???
@mikejarvis8732
@mikejarvis8732 6 жыл бұрын
That's called a snap ring dude.. smoke another before you torque another..... 3 pounds dude... I would call Cheech if he's not available call Chong 4 torque specs ..
How to change ball joints on a Ford Ranger
15:46
ZHP Garage
Рет қаралды 107 М.
How to: Ford Ranger 2wd Lower Ball Joint Replacement
11:24
4DIYers
Рет қаралды 148 М.
Sigma Kid Mistake #funny #sigma
00:17
CRAZY GREAPA
Рет қаралды 30 МЛН
“Don’t stop the chances.”
00:44
ISSEI / いっせい
Рет қаралды 62 МЛН
Contact Patch & Pinion Depth Explained
7:17
DrivelineMaster
Рет қаралды 614 М.
Top 5 reasons why the suspension knocks | AUTODOC tips
8:14
autodoc.co.uk
Рет қаралды 1,5 МЛН
2002 Ford Ranger Upper and Lower Ball Joints - Part 1
15:56
Charles And Cars
Рет қаралды 10 М.
Is Your Car or Truck Wheel Hub Stuck? Tips on Getting it Loose!
10:11
1A Auto: Repair Tips & Secrets Only Mechanics Know
Рет қаралды 1,7 МЛН
How Tire Repair Kits Work - With Internal Views
20:32
knobsdialsandbuttons
Рет қаралды 6 МЛН
How to Press a Ball Joint
8:25
ChrisFix
Рет қаралды 4,1 МЛН
1999-2012 4x4 Ford Ranger front End Rebuild
26:46
Ranger Shop
Рет қаралды 18 М.
FORD RANGER UPPER CONTROL ARM REPLACEMENT (4x4)
10:17
motoforlyfe
Рет қаралды 59 М.
How to REPLACE Lower BALL JOINT on a FORD RANGER
18:50
motoforlyfe
Рет қаралды 44 М.
Sigma Kid Mistake #funny #sigma
00:17
CRAZY GREAPA
Рет қаралды 30 МЛН