Hello ! I own a 530 EXC R '08, has now reached 200hrs and 9 thousands Kms, i decided to rebuild whole engine with brand new genuine parts. The known 530 '08 oil consumption issues have several causes. I read in a forum few weeks ago about this subject, now as my engine is "puzzle like" i am aware on verifying if my new parts package is including updated parts. For sure, the Dell'orto 100 oil jet in right bottom section has to be swapped by a bigger one (125), also must swap the O-ring of oil pump cover by a bit bigger section to avoid (supposedly) engine gearbox oil transfer. The pipe going down from valve cover to air filter box should also be removed or obstructed (??), causing oil burning issue, carbon deposit on valves, exhaust smoke after restarting in case of falldown. Oil pump shaft and plastic gears have been updated, it would be (??) a bit longer than the old one and stronger plastic gears. At this time, my engine is in spare parts, shock absorber and fork in servicing, new engine parts ready for assembly but i prefer making myself sure before beginning re-assembly and / or making mistakes. If you read my comment soon enough, perhaps you could give me some information or confirmation regarding these steps. I'm french, and am hoping you all will understand my english writing !! THX Cya
@user-mf1vj4bb3z9 ай бұрын
Did u put it together yet?
@ethostheone22677 жыл бұрын
Never believe what your told when you buy a bike then! I have been doing it wrong for the past 20 hours, and only putting 450-500ml max. -.- Stripping the bike now for a service. Thank you for this advice man.
@Avus9511 жыл бұрын
I used HondaBond® HT (gasket-in-a-tube) for any issues of that nature with my 2006 625 SMC. That stuff works great and lasts a long time, it also holds up to high heat extremely well. Best of luck with your bike.
@STEFAN2374411 жыл бұрын
Nice how yours starts so easy. I own the 08 and it is a nite mare to start off battery.
@tomj33711 жыл бұрын
Cheers buddy saved me a lot of time!
@flyinsquizz11 жыл бұрын
Thanks a lot for the Video, really helped me doing it
@danielepalladino8428 жыл бұрын
Amazing Clean Bike
@haknslash11 жыл бұрын
Yes the earlier 2008-09 had oil consumption issues. Thankfully you can buy the updated parts. The 2011's had all of the latest revision. You can check more on ktmtalk and search oil pump gear. You will find the how-to to upgrade you parts.
@jap338kx10 жыл бұрын
awesome bike ive never filled up the oil filter cavity like that though "oops"
@MrKmarita12 жыл бұрын
LOVE!
@krazed045111 жыл бұрын
It's a flat sealing surface, if the o ring replacement isn't helping, just add a little blue gasket maker for a good seal ;-)
@haknslash11 жыл бұрын
@tomj337 Glad it helped! Cheers
@ungeboxt13055 жыл бұрын
Which oil should i use for my 2008 excr 450? 10W40? 15W50
@trezzy85258 жыл бұрын
how often do you need to change oil? after every ride og after like 10 rides?
@LiftVector9 жыл бұрын
Thank you!
@haknslash9 жыл бұрын
Quantrius You're welcome!
@user-mf1vj4bb3z9 ай бұрын
I find just filling filter then crank bike few times with out starting works fine turn off gas run till stops be4 oil change
@LordBandit8 жыл бұрын
grazie :)
@rotadavide19 жыл бұрын
Thanks!!
@haknslash9 жыл бұрын
Davide Rota Glad to help
@simyboye9 жыл бұрын
Thanks. Appreciate it.
@haknslash9 жыл бұрын
james sims Glad it helped you!
@past1i512 жыл бұрын
When I change the oil I just drain it at the bottom screw first - then drain the filter room and change the filter, plug the bottom screw back in and fill it up. After that I just start it up and refill a couple of times as the engine/oil filter soaks up oil. Any cons about doing it that way instead of laying it down and soaking the filter manually and filling the filter room first? Seems like a little bit less hassle :) nice vid tho!
@haknslash11 жыл бұрын
Lol. That oil change was after the first couple of hours on a new bike. Very important to change it soon to get all thee new metal out of the crankcase.
@twilliamsusmc11 жыл бұрын
Is the bike on the kickstand. I put moto wheels on mine and hat to cut the kickstand an inch so it would lean.
@GamePlayShotz12 жыл бұрын
your ktm is very cleaned, how did u do????
@haknslash11 жыл бұрын
Nope I haven't had any leaking issue. Maybe your oil filter cover is slightly bent either from impact from a fall or over tightening by previous owners? Check on ktmtalk forums if anyone has had leaking oil filter covers. Best of luck man.
@Avus9511 жыл бұрын
Nice bike. I am leaning towards a 530 EXC-R. My last bike was a 625 SMC (2006). I loved the Lc4 and with full Akra's it was a very nice engine, but I have been wanting something a little more aggressive if you know what I mean :) Are there any things I should know about the bike before I make a decision? It would most likely end up in Supermoto trim and spend at least 90% of the time on asphalt, we have awesome backroads for SuMo action here in southeastern PA.
@haknslash11 жыл бұрын
Haha yes it is on stock kick stand. KTM really should of made it shorter and they also should if ditched the "auto-retract" function. Thankfully those are two simple mods to fix :)
@96F250Diesel11 жыл бұрын
Do you know of any fix for the oil issue on the 2008 KTM exc-r? any help would be appreciated. Possibly an aftermarket mod?
@user-mf1vj4bb3z9 ай бұрын
Dont know if any 1 has tryed it but castol power 1 full synthic works the best out off all oils i have try u can feel the diffirance try it bike likes it big time even takes twic as long to warm up so must be less frickshon
@insightdxb12 жыл бұрын
thanks
@TheDideroni10 жыл бұрын
Nice video. Only you can safe yourself the energy of filling up the oil filter. Just fill with 0,35, let run 30 sec without revving than wait a couple of minutes and top it of with 0,25l. I do always look at the indicator screen and top it just under the top. Why be smarter than the KTM manual?
@hectorramos80394 жыл бұрын
How many quartz ?
@twilliamsusmc10 жыл бұрын
When I change mine. I remove the fuel tank too. Fuel tank cap with vent hose is a perfect drain. Makes a mess.
@JR-vi2ll8 жыл бұрын
Auto correct got me.... I meant to say "uhhhhhh" an "ahhhh".
@haknslash11 жыл бұрын
Check it at operating temp. The glass window should not be used as a "fill level indicator". Always measure how much oil you get out of the motor and keep a log so you can tell what the motor is doing and make sure no oil is burning. Always measure exactly how much you add when you change the oil as well.
@danielepalladino8428 жыл бұрын
Which its the tube below the ignition cover?
@haknslash8 жыл бұрын
I don't have the bike anymore but it was vent tube if I recall. I don't have a shop manual with me any longer, so I'm sorry I can't tell you what the tube was.
@Aleksandermx112 жыл бұрын
U've forgot to remove the gear oil drain plug near the shifter
@eggarage1088 жыл бұрын
ktm exc-r 530 valve adjustment???
@haknslash8 жыл бұрын
I no longer have the bike so I wouldn't be able to make a video for you.
@eggarage1088 жыл бұрын
+haknslash ok
@justinity13 жыл бұрын
9:10 He saw a ghost
@vivalaphill11 жыл бұрын
so you say you had ridden that bike , cause it looks like bought two minutes ago :D nice bike btw.
@haknslash11 жыл бұрын
Changed it at 1.8 hours. You will see a (relative) ton of metal even at that few hours of use. I recommend changing with Dino oil first few times. I think I changed my oil 3 times within the first 6 miles or so. I'm anal like that lol
@haknslash12 жыл бұрын
Sigh. I guess that's why KTM's own enduro, HS and Erzberg competitions. The RMZ is not a enduro or woods machine, it's motox. You mean Beta 520. The same motor that is actually a old KTM RFS motor, yes it had to have the valves adj. This video has nothing to do with RFS motor. The XC4 motors only have one filter but do have seperate trans and engine oil sump. The NEWER KTM's use one filter but both engine and trans share the same oil sump. At least know what you're talking about b4 posting.
@user-mf1vj4bb3z9 ай бұрын
350ml thats it i put 500
@EngineSoldierEngineSoldier8 жыл бұрын
I habe two filters
@haknslash8 жыл бұрын
Do you have a RFS engine? I know the older KTM RFS engines had two oil filters.
@EngineSoldierEngineSoldier8 жыл бұрын
Ne, i think i have only one in my bike :D
@haknslash12 жыл бұрын
Oh and yes some of the earlier XC4 motors had oil pump and transfer issues. You're point being? Name me one motor made by anyone that hasn't had some sort of issue at one point or another. That's what I thought. Regardless of the fact, the 2011 bikes had all of the component upgrades (piston rings, oil pump gear, etc) so I'm not sure what your comment has anything to do relating to the 2011 EXC oil change. You're just a hater. an uneducated one at that.
@user-mf1vj4bb3z9 ай бұрын
350ml isnt much oil think ill stay at 500 hasnt hurt nothing
@thejamis0111 жыл бұрын
Do u even lift bro?
@JR-vi2ll8 жыл бұрын
I couldn't watch it due to all the maddening "shhhhhh" and " ahhhhhh"..... It made me crazy.. I know, I have a problem.
@MD-jp5oc6 жыл бұрын
You could shorten this video and make everyone's day better. We don't need you to film the tedious bit of screwing on and off every bolt, or filling the oil filter up.
@haknslash6 жыл бұрын
Guy F good thing there's a fast forward button huh 👌😄
@elenagruber59534 жыл бұрын
some people may consider it useful. nobody forces you to watch every second of the video.