How to 3D Model Using Blender - Easy Beginner Guide + Tips and Tricks

Рет қаралды 74,656

11 ай бұрын

Blender can be overwhelming at first, however, after watching this video, you will be able to easily design your own things using Blender. Comment any questions you have, and I'll do y best to answer all of them.
In this video you'll learn how to design practical things as well as sculpt organic models.
Interested in FDM 3D printing? Check out www.3dprinteracademy.com for complete courses, unique 3D models, blog articles, and more.
Happy printing!
-Steven
www.3dprinteracademy.com

Пікірлер: 44

@chasewalker3924 9 ай бұрын

I needed this! I had no idea where to begin. Definitely going to be watching the rest of your videos

@bartek2138 4 ай бұрын

Great tutorial, your pace is spot on, I pause and rewind when needed, while you video remains packed with information. Thanks.

@Dillan0.0 9 ай бұрын

Great job bud, is love to see more! Just starting my journey in blender and this has helped tons

@gamertames349 Ай бұрын

Honestly very easy to follow. I like that you didn't skip over anything while keeping the pace of the video high to keep attention. Thanks for the help!

@hey_how_are_ya 11 ай бұрын

Thank you so much for making this tutorial. There is so much in this tutorial I definitely will need to rewatch it a few times while using blender to get used to the interface.

@BakuLP 2 ай бұрын

For me as an absolute beginner in this program, I applaud you for this easy to understand tutorial! Thank you!

@EnDroid14 Ай бұрын

You dear Sir are the perfect teacher for everything I was looking for. I have seen A LOT of tutorial videos for blender, but this one explained literally EVERYTHING I had questions about.

@Leonardokite 3 ай бұрын

I have watched nearly an hour of Blender tutorials and unfortunately it led me down a path of artistic creation. I was interested in functional. In the first half for your video I learned everything I was looking for. And then after a brief interlude of more artistic Blender, kind of LOL, you added more in depth functionality. You have been bookmarked in my watch again list 😃

@BsrlinMAZ 8 ай бұрын

Thank you so very much for sharing your knowledge, advice and tips for using Blender. Recently purchased a 'starter' 3D filament printer (MINGDA Magician X) and now learning to create with Blender. Thank you for the time and effort you've put into making these videos.

@glmchn Ай бұрын

That was just the exact amount of what I needed to get started, thank you very much gentlemen

@LilGideon92 9 ай бұрын

Im getting a printer and i was scared of 3d modeling cus it sounded impossible but your videos shows that its not, Thanks Keep it up!

@uscitizen5656 Ай бұрын

What a Great Help this was for me. Trying to cut a hole with 2 known objects I already had. Thank you!

@swordcowfan 12 күн бұрын

Just starting and this is the best video I have found along with another of yours that I just watched. Time to play with it and feel like I even now have a clue. Thankyou.

@cropse1512 Ай бұрын

Really nice and easy tutorial for 3d printing, thanks :)

@janewestbrook8364 Ай бұрын

Thank you, Steven...very helpful.

@marksmanaz 5 ай бұрын

Awesome video, thank you

@communicationiskey- 5 ай бұрын

Great video, simply and very well explained! New Sub!

@FunFunZeroOne Ай бұрын

This tutorial is amazing! I am documenting my journey on my channel which turns out to be a ton of fun even though my designs are horrible xD

@ronnybovijn943 25 күн бұрын

Thanks real helpful .👍

@highdefinitionsound 5 күн бұрын

Simple and straight to the point. I use Shapr3D for modeling and it can be painful to fit myself in blender without proper measurements.

@markusdd5 9 ай бұрын

1: Great video! 2: There is actually an even more convenient way to see edge lengths while modelling. When in edit mode, go to the overlay menu in the top right and under Measurements select edge length. You can also enable edge angle when useful for your model. This is super nice when manually extruding and moving and scaling and much easier than the MeasureIt plugin.

@jhue73 9 ай бұрын

maybe im doing something wrong but its not showing the right measurement. its showing 2mm even though its a 60mm cube. what am i doing wrong?

@Spacegatestudio 10 ай бұрын

Thanks for this video. I am plugging away and learning it. I did notice that you say press "Shift-R" to bring up the Remesh: Voxelsize grid at 20:05, where I found that just pressing "R" did this. No biggie just wanted to let you know and others who maybe confused when trying to bring the grid up.

@kilimange8285 Ай бұрын

Thank you, its helped me

@vickisview Ай бұрын

thank you so much! this is exactly what i was looking for!! “Shift + R” wasn’t working for me 😅

@MarcLuscher Ай бұрын

@5.45 : the Art of Noise

@Ivan-Ko Ай бұрын

Hellow. Thank you for this video. I got a problem with bending my obgect, wich is not just a cube. Some 'faces' I can not 'loop cut' for a reason I dont know and a bending doesnt works like it have to. Could you please make a video to explane how to bend some obgects, and a especially some not filled in objects, with a steps up and down :-). Thanks forward to you and have a good day!!!

@jamesdenny4734 6 ай бұрын

Hello, I'm a model railroader, n I want to design a tender(n scale 1/160). I was told resin was the way to go. Is Blender a good app for designing this? Thanks for responding. 😊

@cuddlybear4524 2 ай бұрын

Is there a way to save the initial set up from meters to millimeters as a template or have Blender open with those settings each time instead of doing it manually for every new project?

@geo577-gb4gy 4 ай бұрын

Almost got setup, but about 2:15 I realized my cube's center origin is 1/2 into the grid. and not resting on top of the plane, where your's appears to be. Is there a way to adjust this setting for my template setup?

@marekeos 3 ай бұрын

Thanks for this! Excellent tutorial!

@CannabisCureTV 2 ай бұрын

I do not get the same options on the Transform panel when I press N. No dimensions. I get Median, Vertices Data and Edge Data. Any suggestions?

@nhartman7 Ай бұрын

Have you ran into the sculpture mode not working? Did some seraches and no results help my issues. The tool seem like they are working but you can't see what they are doing.

@jeremyswanson1108 3 ай бұрын

I followed along with the video and could not get the sculpting tools to work. They don't do anything. I tried to fix the scale to mm (in your earlier example) without any impact on getting the sculpting tools to work. Any advice? I've been googling and can't quite find the answer.

@indigophoenix37 3 ай бұрын

Will I need to manually set the units to mm every time I start a new project or is there a way to set it as the default units?

@jason_tarr 3 ай бұрын

After you set all your desired settings (units ect) go to File -> Defaults -> Save Startup File This will save all your settings (including the default starting scene)

@vickisview Ай бұрын

27:18 When I try to check the normals the option isn’t there. I’m using blender 4.1 if anyone knows how else I can check them! I tried playing around and looking at different settings and searching up on the menu search but it’s not working 😅

@lucutes2936 2 ай бұрын

11:30 useful adoon

@bluecali4na 20 күн бұрын

Transform isn't showing location, rotation, scale, or dimensions on mine

@CatGoodwin Ай бұрын

12 minutes in - when I’m clicking the 2 points it’s selecting the whole one side of the whole highlighting it in orange and then giving me 12000 different measurements for each point? What have I don’t wrong please!!!