How To Add and Install More Lights To Your LED Strip Lights

This amazing video tutorial on how to extend the length of you led strip lights with more strip lights was made by @glitteer.21 on TikTok. As an Amazon Associate I earn from qualifying purchases.
Need new video or movie making equipment: www.amazon.com/shop/jeromeq/l...
Get the LED Strip Light Connectors Here: linktr.ee/JeromeQ
The LED IR light strip controller for the lights: amzn.to/3wQWRfe
Need new video or movie making equipment: www.amazon.com/shop/jeromeq/l...
#ledstriplights #HowTo #ExtendYourStripLights

[@JeromeQ]

The 4 pin Led light extension connectors shown in this video: amzn.to/3ph6Y5t If you need the 3 pin version of the LED strip light connectors: amzn.to/3klGtKc Need new video or movie making equipment: www.amazon.com/shop/jeromeq/list/3OXSVEF8WPOQX Feel free to check out our Linktree bio link: linktr.ee/JeromeQ If you like LoFi relaxing study music, go here: www.youtube.com/@DukeOfLoFi Need new video or movie making equipment: www.amazon.com/shop/jeromeq/list/3OXSVEF8WPOQX

[@fenderstrat2202]

Why you got em hangin like christmas lights 😂😂

[@TheeRealChunkeMunke]

?? They’re were just showing them not

[@faithrogers4787]

😂😂😂

[@goblingangftw]

Best comment 😂😂🙏🙏

[@sunniiai]

Personally my parents think the adhesive will stick to my bed frame. Smh. I have them TIED to the inside of my bunk beds frame

[@Mizukie_xx]

@@sunniiaisame but I convinced my mum to put them on the wall

[@foybodyandsoul4499]

Wow , everything I needed to know in 30 seconds, I literally watched 10 videos before this, this was the only one that helped

[@JeromeQ]

I am very glad it was useful. I shall make more!

[@Random_edits.]

My question is why the companies gotta make it so complicated and cants just add connectors on each end

[@RealPronotfound]

It's pretty obvious why. Led strips are made from one huge roll and then cut in either 5m or less common 10m and it would require alot of precise manual labor instead

[@kingzionmusic]

Because they know majority won’t figure it out and just buy another box of strips more money for them if we don’t figure it out.

[@domesticautomationllc]

so true

[@jamesdunnjr.2518]

Just stop being lazy lmao

[@Cloudy__gaming]

@@jamesdunnjr.2518 stop being lazy? You wanna do all this work just to have some lights in your room go ahead but I guarantee you if somebody don’t wanna do all this work for lights then it’s not called being lazy

[@brooklynn6916]

You are an absolute life saver. I was about to start crying after putting mine up and they weren’t working. Turns out that sliding the stop into place is very useful lmao

[@JeromeQ]

I am so glad that it worked out, just by watching this video. This comment ( among others) made making this video so worth it. Thanks!!

[@brooklynn6916]

@@JeromeQ I now love my lights and actually know how to connect them in the future thanks to you

[@betiro1283]

Where can i but that adaptar so i can have more leds

[@JeromeQ]

amzn.to/3ph6Y5t

[@AxclesYT]

BROOO! ur a life saver ☺️ I thought my led lights are waste bcs i could not connect the led strip thanks bro keep uploading such video u deserve a sub

[@brooklynn6916]

Same

[@faithryan-xp1ql]

If u don't have the clip thing will it still work

[@AxclesYT]

@@faithryan-xp1ql You need to solder it

[@AxclesYT]

@@faithryan-xp1ql if u don't have the clips

[@faithryan-xp1ql]

Thx bro

[@jackgaming8522]

CAN U GIVE THE LINK OF THAT CLIP PLZ

[@JeromeQ]

The 4 pin Led light extension connectors shown in this video: amzn.to/3ph6Y5t If you need the 3 pin version of the LED strip light connectors: amzn.to/3klGtKc

[@marcohidalgoflores5272]

Can you use tape?

[@BlueMech]

​@@marcohidalgoflores5272 ? How will you be able to use tape to do that?

[@upnorthadventures9293]

@@BlueMech electrical tape

[@BlueMech]

@@upnorthadventures9293 the points of the lights won't be able to match as accurately as the clips

[@anazeus]

thanks I was struggling to think why the clip doesnt fit to the extension pin. Need to slide it harder to make it works!👍🏻

[@laurahanna369]

Lol me too 2 days ago I bought a package had no idea about cutting ends. Hm common sense

[@wendye1868]

Thank you for creating this bit where you will have to cut the plastic top piece to slide in the copper. That saved me from tearing my hair out. Side Tip: I used duct tape to hold the opposite ends of the wall strip while I patted the sticky side down to make it stay on its own down the wall. I was doing this solo without anyone to help hold down the other ends 😅

[@juu411]

thanks so much ! 💕 bout to do it rn bro

[@skit6]

thank you for making this review!

[@Just.Ari0]

THANK YOU SM I DIDNT KNOW HOW TO PLUG THEM IN

[@JeromeQ]

You are very welcome. 😁

[@Kst_101]

If you have less Budget you can also perform Soldering!!

[@deni-rh1jp]

What?

[@Kst_101]

@@deni-rh1jp search it up on Google bro

[@yanurtalukder69]

Can you make a tutorial on how to use these strip lights separately?

[@JeromeQ]

I need to understand your question. Please explain.

[@yanurtalukder69]

As I was saying that if you can make a video where you cut a strip light into two pieces. One piece is like 10 cm, and other is like 15 or 20 cm. Now, all you need to do is to control both pieces with 1 remote/controller. Pls send me the video link as soon as you make the video! Thanks☺

[@yanurtalukder69]

@I'd buy that for a dollar Thanks man! Just send me the link of your video!

[@yanurtalukder69]

@Wee chocolate bananas Wait...your name was "I did buy that for a dollar"?! You changed it?

[@suzy160]

Do you still need to plug in the new strip or does it run off the power of the original leds

[@JeromeQ]

Once you connect the light strips, they will run off the same power. No need for another power supply.

[@suzy160]

@@JeromeQ Ty!

[@djkadakamc1889]

It depends by the type of the power supply.

[@vucci8378]

is it better to run one power line and connect the two rolls together??

[@officialxehan427]

@@JeromeQ so the cut one turns into a bluethooth like it works with out the plug

[@Bunny__shorts]

TYSMMMM!❤ THIS DESERVES A SUB!

[@Itsbaddie_be]

Thank you so much for the tutorials 🙏🏾

[@JeromeQ]

You are very welcomed! I plan on making more.

[@maxpower2919]

Not advised with rgbic strips. It could work but the longevity and communication between chips can become compromised.

[@terminatedfornothing957]

govee m1 🎉🎉🎉

[@codymccaghren7397]

Yes sith rgbic yyour much better off if you solder.

[@smp3745]

Mind hecking blown the endless conundrum of making custom led strips has been thoroughly defeated.

[@Loy4eva]

Can you give me the link of these EXACT led stripes please ?

[@JeromeQ]

Thanks for asking. Here it is: amzn.to/3tQisie The same thing applies to the led lights with only 3 connectors as well. Just make show to buy the right led strip connector extender. Also check the description of this video for more information.

[@shohelkhan6498]

​@@JeromeQ

[@antanasxg1]

These 12v non addressable RGBs degrade color over long run. Not sure if there are voltage boosters for these. Otherwise if you don’t care about color degradation (its slight but noticeable) these are great if you like for it to be solder free

[@RedM100]

We getting electrocuted with this one!!!! 🔥🔥🔥🔥🔥💀💀

[@thekidrosa5323]

Wish I would of seen this earlier I have them in my kitchen but never new how to connect the other half of them and have no idea we’re they are now. So now I’m doing them months later in my room and tryna figure it out so there not wasted 😅

[@thebomcraft1827]

⚠️⚠️WRONG⚠️⚠️ NOT ANY LENGHT ....... BECAUSE THE POWERSUPLY IS NOT MADE FOR ANY LENGHT.... IF YOU WANT TO EXTENDT YOU NED TO MAKE SHURE YOU HSVE EXTRA POWER AFTER 10 TO 20M

[@smp3745]

make the power supply cord longer durrrrr its alot easier

[@alza3imm948]

@@smp3745he wasnt talking about the cord length

[@PlaidHiker]

Will this nuclear reactor I built be enough to power an extra 10 meters?

[@patriciagallacher2905]

​@@smp3745power supply can only work so many lights,l have over 30 meters so have a power supply on each end.

[@notimefortact9877]

If you make the tape longer you may need to also get a better power supply. Power supplies can only push the power so far. Check the stats of your power supply if you do this.

[@angelavelasquez9377]

U earned a subscriber ty

[@JeromeQ]

Thanks for subscribing! 😁 Feel free to share this channel with your friends. I will be making more videos. 😁

[@localfatty4364]

I don’t know why I have such a hard time with this 😂

[@alsstewart8583]

Gr8 but where do I get led connections from

[@JeromeQ]

The 4 pin Led light extension connectors shown in this video: amzn.to/3ph6Y5t. If you need the 3 pin version of the LED strip light connectors: amzn.to/3klGtKc

[@neslkid8707]

saved mines appreciate you

[@JeromeQ]

I am very glad it was useful. 😁

[@just_press_play_on_tape4401]

What if the plug 🔌 is to short?

[@MV_9090]

Which lights are these?

[@JeromeQ]

These are the lights featured in the video: amzn.to/3OMcFnJ The Led light extension connectors shown in this video: amzn.to/3ph6Y5t

[@kr1s_15]

Does the part that you cut off still work?

[@Shinssei]

The scissors 💀

[@zartilagul2098]

Where do you get the thing if you hold this I don’t know the name my one is broken and i was cry alt

[@Zoroaster4]

They sell them on Amazon and most bigger online marketplaces. Just make sure the ones you order have the same number of pins as your led strips pads. Just search led strip connecter x pins. Replace x with the number of pads your led strips have.

[@smokeydapot]

Thank you! 😁

[@JeromeQ]

Glad this was helpful 😃

[@drcyb3r]

There are also some clips that have sharp pins that go through the copper and the rubber on top. They make a perfect connection and you don't need to prepare the LED strip.

[@terminatedfornothing957]

whats i called i need

[@TreyWydLOLZ]

Thanks

[@JeromeQ]

You are very welcome! 😁

[@jelly_is_thicc4872]

Ohhhh my dumbass thought after you cut it it would be wireless, so I just have to buy an extension cord since I don’t want the LED lights all the way around the area I want them in

[@NyashiaLynette]

Me toooo lol I was so maddd

[@Yourfavv3irinii]

WHERE DID U FIND THAT CLIP

[@cathcartmagic]

Do the led lights have to be the same brand or can I use any that are similar

[@JeromeQ]

I would say use the same.

[@Sere1185]

Does this work with any led light or only a certain brand?

[@AvaxBloom]

Yeh bc i have sheins led light

[@ashvanbro9329]

Can i ask were do you get the led connectors to join led to led

[@JeromeQ]

Thanks for asking. You can find them here: amzn.to/3tNoCU8

[@keneil8505]

Can you also use the clip on the solder part of the led strip?

[@JeromeQ]

If you can find a way to get that solder off, the better.

[@martinramos9541]

Yey thanks! For this vid. Now i can finally extend my LED strip into 60 meters.😊😊😊

[@PlaidHiker]

Did that work?

[@martinramos9541]

@@PlaidHiker yeah

[@Owa24]

Where do you get the wee part that connects the strips are where are these lights from thanks

[@JeromeQ]

The 4 pin Led light extension connectors shown in this video: amzn.to/3ph6Y5t If you need the 3 pin version of the LED strip light connectors: amzn.to/3klGtKc

[@PalestineWiIIBeFree]

I slid them both in but the other side won’t light up

[@alanjones5959]

What are those exact clips called?

[@PlaidHiker]

Op likes the comment but doesn’t answer.

[@PalestineWiIIBeFree]

THANK YOU

[@orth-mar-03]

Where do I get that little thing that connects them to each other?

[@JeromeQ]

Thanks for asking. The links for the 3 and 4 pin connectors is in the description and comments sections of this video.

[@Zoe_92]

I got this piece but one strip looks brighter than the other is there’s anything i should know to make them both bright?

[@catlovers422]

Can it be different brands or does it have to be the same brand

[@lukedavis436]

Some LED strips have a maximum lengh so make sure you have a decent power supply

[@Hazel.x]

Quick question and please answer! Do I need to cut it?

[@mingzih]

i finally know how to use that 😅

[@vineticudoru333]

And be sure if controller and power supply suport the lenght of your ledstrip!

[@nellygirl]

where did you buy these?

[@JeromeQ]

The connectors or the led lights?

[@quinn_b4il3y]

Can u do it without the comnector??

[@davian00]

Why not solder it. It'll be much smaller and fit way more slim against something and not be as noticeable.

[@footballfusionmill5744]

U got it bro

[@raajan.draws.3254]

Will the colours fade if I accidentally cut my strips at around about 4 meters and I want to connect the other 6 meters back

[@MILlz0]

I love how he has a great tutorial but then the lights set up are just bad😂 (Not trying to be mean just being honest)

[@juniorh71]

I'm having trouble peeling off the plastic to make contact any suggestions.. Thank you

[@rachidboezit]

Where can I buy the clip to Connect the led

[@JeromeQ]

The 4 pin Led light extension connectors shown in this video: amzn.to/3ph6Y5t If you need the 3 pin version of the LED strip light connectors: amzn.to/3klGtKc

[@nafiacurtis9489]

what happens if you buy too long of a strip and you only want to use some of it is it ok to cut a piece off will the lights still work or I would have to buy a shorter length

[@JeromeQ]

As long as the led lights are like the ones featured in this video ( amzn.to/3sbBsY3 ) , you can cut them any length, per instructions in this video.

[@queengirldelacruz1047]

What we called that one to connect?

[@mikeox-small6865]

Connected mine but now only one side glows any color and the other side is only red. Looks cool ngl

[@planure4388]

А припаять не?

[@nirah4398]

I just can’t “pull it back”. Idk what to do

[@never_kw8nt_bpm646]

Nice but my lights are different soo not sure how to do that 😕 + I want to know how u make them short bcz if I cut them they will stop working yeah soo if u know how to make them short plz tell or make vid

[@rainnavarro7785]

how about neon strips rgb (with tube)?

[@GT_Sights]

How do I make one half one color and the other half another color?

[@asm_sannu]

What’s the name of the extender

[@lillyhopkins99]

I broke my lights thx

[@kokushibo6578]

do they work with normal govee? i dont want to ruin mine, i have a little to much led lights because i over estimated the size of my room

[@JeromeQ]

They should work. Just make sure you have the right number of pins to connect ( 3 pins to 3 pins, 4 pins to 4 pins )

[@kokushibo6578]

@@JeromeQ oh alright thanks!

[@nawpoe8087]

How do I connect my phone to my led light to change color?

[@JeromeQ]

Because of your question, I made a video to answer it. Here it is: kzbin.info0AEFgQWOPFc

[@Druzhh]

Do the led have adhesive?

[@JeromeQ]

Thanks for asking. Yes it does. It's on the back of the LEDs. Just careful peel off the back.

[@sohilaawaad8397]

how can we connect it (the app) ????

[@reidbergschnieder3946]

Yo I broke one of my lights and only a few work, does this method work

[@JeromeQ]

Get new lights, follow the video instructions, and you would be good to go.

[@stormclaw292]

Where did u buy the adapter

[@SenseiWolfe]

Could someone tell me the name of that clip used to attack the separate cut strips of led?

[@JeromeQ]

The 4 pin Led light extension connectors shown in this video: amzn.to/3ph6Y5t. If you need the 3 pin version of the LED strip light connectors: amzn.to/3klGtKc

[@K4YL4NNII]

where do u buythose

[@samattack970]

Where do I gettttt??

[@hakanandersson229]

tancks man

[@Footie_Clips_47]

please can anyone tell can it be connected to one adapter or will it need two adapter

[@darkbreed]

do not forget that there is a maximum length you can use with DC current, at 12V stip it is at near 14 meters.

[@Bandedegarantie]

What about amperes ?

[@TheSoldercreeper]

@@Bandedegarantie they are wired in series, meaning the current will be the same for al leds. Voltage drops in series, not the current

[@renegade_patriot]

Outside scope of this short video

[@darkbreed]

​@@TheSoldercreeper that is not true all LED's at LED stripes are wired parallel, this is why you reach at about 14 meters the point where it is getting dangerous because the wirering can not handle over more than this distance the current and will burn.

[@vanshika-tj2wp]

can you please elaborate? after my calculations i think I'd need around 12.5 metres of the strips but all ive seen is 5m and 10m available online, dk what im supposed to do

[@beckylucky6853]

Thanx

[@JeromeQ]

You are very welcome!

[@subyouwont]

Don’t forget to make sure your power source can hold that many lights. Voltage doesn’t change, but add watts

[@SaitamaTheBaldBoi]

You mean amps?

[@yogolee69]

Can we solder??

[@juniorwilliam]

Where can i get the thing to connect the lights together?😢

[@JeromeQ]

Thanks for asking. Here it is: amzn.to/3rQvBes

[@user-ji5gv6dc6r]

My power supply input is 12v and output is 6v is it enough to add new 5m leds

[@sabre5216]

Woah an inch! thats pretty huge if you ask me😞

[@tbanu9935]

Where did you get clip

[@JeromeQ]

Definitely check the description of this video to get them.

[@chadnad4370]

I did that but the extended led strip connection only turns on blue and does change colors according to the main led strips . Can anyone help ?

[@Dembesties312]

Do it really work?

[@Totally.not.valentina.]

Bro mine where litterally just a plug at the end of each roll lol

[@matthewmelo2247]

Does it matter if it’s a different brand

[@JeromeQ]

To be on the safe side, keep it the same brand that you bought.

[@matthewmelo2247]

@@JeromeQ thank you for helping

[@ShiotaSama]

This might be stupid but does anyone know if you can use a 4 pin adapter on a led with 3 pads?

[@jaycubbs6596]

Where can I get theses every other one has wires

[@WarfareAct]

Or you can solder