How to Add Magnets To your 3d Printed Models

I have put together one of my ways to put magnets into our models. There is a way with green stuff and another way with calculating hole depth and hollowing etc but this is one way and works fine for me so I made a video about it, almost as if that’s a thing I do on a weekly basis or something
Artist of the month: / 3d_printed2020
⭐️ Huge Thank You to My Patrons: / groundeffected
MERCH Now Available! - groundeffected.com/product-ca...
🔔 Find me on SOCIAL:
Instagram - / groundeffected
Facebook - / 548001063221083
TikTok - / groundeffected
Discord - Available through Patreon
Website - groundeffected.com/
🎨 Supplies: elementgames.co.uk/?d=10734
🖌️ LIST:
▪️ The Army Painter Wet Palette: amzn.to/3x1VmIN
▪️ Vallejo Black Primer: amzn.to/3PLtpMv
▪️ Bamboo Synthetic Kabuki Brush Set: amzn.to/3t09Ru5
▪️ Tenacious for Strengthening Prints: amzn.to/3CTSU6X
▪️ Bostik Blu Tack Mastic Adhesive: amzn.to/3a3233S
▪️ Vallejo Fairy Flesh Set: amzn.to/38pbUAT
📍 Check out ROXY ROSE!
_roxy_rose?utm_...
vm.tiktok.com/ZMLxUenru/
📌 Playlists to Watch!
Brush Control:
• Brush control
3D Printing:
• 3D printing
Painting:
• painting
📌 Other Videos You Might Be Interested In Watching:
What happens when you stroke your brush? Important knowledge!
• What Happens When You ...
I painted a 3d printed Djinn and her pet
• I Painted a 3d Printed...
Using powders to enhance your hobby?
• Using powders to enhan...
How to change FEP sheet for resin 3D printer
• How to change FEP shee...
#3dprint #3dprinter #3dprinted #3dprinting #acrylicpainting #paintingspiderman #resinfigures #resinfigurepainting #spidermanps4 #spidermanps5 #3dprinting #3dprinter #painting3dprints #miniaturepainting #howtopaint3dprints #3dprinted #howto #brushcontrol
Music by white bat audio
Technical mumbo-jumbo below:
---------------------------------------------------
Related Phrases:
How I painted my 3D print / Spiderman, 3D Print, 3D Printer, 3D Printed, 3D Printing, Acrylic Painting, Painting Spiderman, Resin Figures, Resin Figure Painting, Spider-Man Ps4, Spider-Man Ps5, 3D Printing, 3D Printer, Painting 3D Prints, Miniature Painting, How To Paint 3D Prints, 3D Printed, 3D Printed Miniatures, Mini Painting, Resin 3D Printer, 3D Printed Minis, 3D Print, Paint 3D Print,
Disclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of watching any of my publications. You acknowledge that you use the information I provide at your own risk. Do your own research.
Amazon: Groundeffected is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn commission fees. Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on [relevant Amazon Site(s), as applicable] at the time of purchase will apply to the purchase of this product.
Copyright Notice: This video and my KZbin channel contain dialogue, music and images that are property of “Groundeffected”. You are allowed to share the video link and channel, and embed this video in your website or others as long as a link back is provided.
© Groundeffected
Music by white bat audio

[@Groundeffected]

check out this video for painting model faces kzbin.info/www/bejne/lXWahKyidquLiNU

[@jordanfox3012]

You deserve more subs man. I'm currently waiting on a back payment from work which will get me my resin printer. BUT.. I've already learned so much from watching your vids.. my kind of humour.. keep it up my dude

[@Groundeffected]

Thanks dude. I’m still new to this so my video making skills need to get better first I think. Thanks for watching dude

[@SunWoodMC]

Your channel is criminaly underated.

[@Groundeffected]

Thank you so much dude. I appreciate it.

[@tjthompson7030]

I gotta try to add magnets to my models. Definitely gonna help with painting! Congrats to the to the artist of the month!

[@Groundeffected]

Man it’s a game changer. Get strong ones as big as can fit as thick as possible too then you can paint it together for overall composition and break it down to paint difficult to reach parts too

[@scooteroo1701]

If you find you have trouble with the magnets coming out attached to the tool you use to press them in switch to a non magnetic item. I use an aluminum xacto handle of popsicle sticks made of wood to press and adjust the magnets as needed. I've been adding more and more magnets to my models for swapping different heads or hands with weapons lately and its been fantastic! Great video on this!

[@Groundeffected]

Great rip. Yea magnets are the best!!!

[@nicwester1]

Thank you! This is what I needed to see!

[@Groundeffected]

Hope it helps ya bruh!!

[@leonardomacleod]

I did you tips to put in the magnets in a superman print I did and it worked perfect, but I did drop on magnet inside the model but I was able to get the peace back out (hehe).

[@Groundeffected]

Haha. It happens. Just shake it around and it’ll stick onto the next magnet and just be there inside like a secret present forever haha

[@spawn666reaper]

Super helpful dude!!! Going to get me some magnets!!

[@Groundeffected]

Heck yea. Dang I should’ve linked magnets in the description. Let me know if you can’t find any and I’ll try find some links

[@aberodriguez4149]

Great video informative and interesting.

[@jeremyposey3608]

I'm totally going to be friking fighting with my parts now.. lol nice vid, I love the tutorials.

[@Groundeffected]

I’ll do a video asap for making holes in lychee to make it easier.

[@mitchellkruszyna109]

Thanks for the video! Would be handy for models with multiple heads!

[@Groundeffected]

Oh heck yea it is!

[@TDSaber]

Awesome Video! I also noticed you put multiple holes to the hollowed model. I thought I was overdoing it...But I guess it works.

[@Groundeffected]

Nah dude as many holes as I can get away with helps to keep suction low and clean out the model inside!!

[@ThePlasticModeler]

Only question I have here is: how do you ensure the two holes are lined up properly when you add them in the slicer? Or isn't it a problem if they're a bit out of line?

[@stevecool7096]

Awesome.

[@c27ministerrain43]

Why you so smart brah

[@Groundeffected]

Lol cos my mamma told me so

[@jamescannon8632]

very helpful thx Sir

[@Groundeffected]

Thank you for watching bruh!

[@ashthundercliffe]

Super helpful video as always. i did wonder how you prevent the magnet falling in haha.

[@Groundeffected]

Sometimes they go in. Just a spare magnet for the inside model gods

[@ArkhamRed97]

i made a cylinder in zbrush and the sized it to the magnet in chhitubox pro or in lychee and use the boolean option so you wont have a hole all the way through my print. i also size it up to lets .3 mm so if i use 8mm magnets i'll size the hole 8.3 mm that way the magnet will fit and just glue

[@Groundeffected]

Good idea. I don’t mind opening the hole slightly. You can use lychee to do the same thing too during supporting. And you can adjust the depth if you want so that the hollow is just shy of the hole then it gives a tiny lip that can hold the magnet. I just live the big holes to help clean out the inside of the model! Thanks for watching and your idea for magnets holes too!

[@Amarand]

Fun video! Love Spirited Away!

[@Groundeffected]

Thanks dude

[@Backyard_props]

Yay!

[@tonik1222]

have you tried making fero-magnetic resin by adding iron dust?

[@nsrstudio7301]

Nice model...why i print some model not fit the hole..need more sand paper..

[@Groundeffected]

Maybe more sand paper ? Or the resin is shrinking?

[@kx4gamingandmodels123]

Just subbed and watched this, question, how do you deal with seams and using magnets?

[@Groundeffected]

You have to make sure that the join is perfect this means sanding filing cutting whatever you have to do to make that join perfect.

[@Ellery-USA]

I like it!

[@Groundeffected]

Thanks dude

[@sirdrakey]

"smashed on the floor" is that what "Groundeffected" means? 😆

[@Groundeffected]

Um. Maybe?

[@willienelsoncash]

this work is all done post-curing? I've found my models to be brittle when cutting before curing. If this is post-curing, any suggestions on the model thickness when hollowing?

[@Groundeffected]

It’s 2mm thick that I use for most hollowing unless it give random pockets but that’s the average I use and yea all after curing can be done before but the top layer doesn’t get bonded with the inner layers and it will pull the magnet out easily if you don’t get a good bond

[@viniciuzzgalo]

Awesome!

[@Groundeffected]

Congrats bro!

[@viniciuzzgalo]

@@Groundeffected thanx man!

[@paulhutchinsonjr5501]

Super helpful video !! lol Is the model you used??

[@Groundeffected]

I assume you mean waist is the model. It’s a private commission sculpted by TDSABER

[@Backyard_props]

Congrats to the winner! Decided not to give away the name lol 😂

[@Groundeffected]

Hahaha and you too dude. Fantastic mj for real!!

[@outlawfpv3792]

This is the way..

[@Groundeffected]

Indeed!

[@anthonyberg8395]

magnets rule😃

[@Groundeffected]

Indeed they do

[@georgeashcroft]

Beards are the way forward on youtube

[@Groundeffected]

It’s all about the face hair bruh

[@darren990]

nice

[@Groundeffected]

Thanks 🙏

[@dadoffour]

New viewers wondering what the instructions at the end are 😂

[@Groundeffected]

Hahahaha it is my favourite part of every video.

[@dadoffour]

@@Groundeffected haha wondering what brushes you use for your eye work aswell mate

[@Debunked421]

If I use magnets, I open the model in Meshmixer, make a hole in my area I need the magnet, then in whatever slicer I use I hollow the model then use the hole feature but make it a little less than the Meshmixer hole, gets me my magnet whole and my resin hole all in one. - I had a Bagel and Cream Cheese for Breakfast, OJ and a fruit smoothie!

[@Groundeffected]

If you use lychee you can do the same too in the app. And that is a breakfast of kings for real yo!!

[@hicontrast]

First