What a beautifully special gift for the Bride and Groom! 😍
@marinamakesart8 ай бұрын
❤️🙏❤️
@Babyface702410 ай бұрын
Oh my goodness! This is absolutely gorgeous. I love this! Also I've been wanting to see a video on immersing invitation or photos in resin.Thank you Marina!
@marinamakesart9 ай бұрын
That makes me so happy! Thank you my sweet friend 🥹❤️
@larizabush9 ай бұрын
It’s Such a beautiful piece!!! ❤❤❤
@MYLLLYY9 ай бұрын
Cea mai superbă invitație de nuntă pe care am văzut-o vreodată!!!!!!
@usherl2508 ай бұрын
Wow, that is so so pretty. It really adds a nice touch to have the invitation and photo
@jenbowes59089 ай бұрын
Absolutely stunning! Thank you so much for sharing your process! Do you have any tips/videos on doing inscriptions in the resin? Thank you Marina!
@marinamakesart9 ай бұрын
Thank you for your sweet words and for watching ❤️ I usually use my cricut joy for inscriptions. I don’t currently have any videos on KZbin, but I do share how I place an inscription in my flower blocks course on my website: marinamakesart.com/courses ❤️
@jenbowes59089 ай бұрын
@@marinamakesart awesome! I'll check it out. Thanks so much!
@subitchapuvaneswari1781Ай бұрын
உங்கள் வேலைப்பாடு மிகவும் அழகாக 😍🥰🤩 இருக்கிறது . நன்றாக விளக்கமாக சொல்லித் தந்தீர்கள் . ரொம்ப 🙏 நன்றி .
@0610wjh8 ай бұрын
What a lovely piece of art!! I would love to get into this as a hobby 😍
@couponingwithmarie86072 ай бұрын
Amazing piece ❤❤❤
@craftsbycarmen7 ай бұрын
This is so beautiful, thank you for sharing your project steps and tips.
@huynhthanhtruc46705 ай бұрын
It’s so beautiful and exactly I am looking for to do for my niece ‘s wedding on October 😍 Thanks for your tutorial !
@MultiLisa108 ай бұрын
Crimany that is so beautiful!
@belghalimalika83332 ай бұрын
I liked it very much, Mashallah
@chymoreno71665 ай бұрын
Very Beautiful❤
@chitaylor27757 ай бұрын
Beautiful!!
@ellas60874 ай бұрын
Beautiful
@rechellethackray8 ай бұрын
What a gorgeous result ❤ I was just wondering, from past research I had learnt that you had to pour the next layer when the previous one was firm but 'tacky' to prevent the layers from showing. Or if left to cure completely you need to sand down that layer so the new resin can make better adhesion and once again, prevent any layer lines from showing. Do you find with your end result that you see any layering at all or is your resin still a little tacky? I'm super curious to know. Thank you for sharing such a detailed tutorial, I love the idea of laminating your paper ❤ You certainly have a natural talent for floral arrangements, your finished piece is absolutely gorgeous 😍
@marinamakesart8 ай бұрын
Thank you so much for your kind words ❤️ Yes, if you want to minimize layer lines, it is best to pour before the previous layer is completely cured. However, if you do wait for the layer to cure completely, you don’t have to sand, you can just pour the next layer whenever you’re ready. The layers will adhere nicely either way. I personally don’t care about layer lines, so I usually wait until a layer is completely cured before pouring the next one. Good luck 🍀❤️
@andreamata22006 ай бұрын
I was hoping someone clarify this to me because I’m making for the first time an 8 by 8 picture frame but I was so scared how to do the layers
@JyS3872 ай бұрын
Muy hermoso ❤❤
@biancacastaneda616 ай бұрын
I WISH I HAD HEARD THIS HACK BEFORE. Oh how many molds I could have saved
@karishmabegum539913 күн бұрын
It's so beautiful sis, I have a doubt.. For each and every layer of resin, you waited a day?? How many days it took to complete this project...
@adeluxy2 ай бұрын
Hi Marina, please show is how you specifically clean up the edges or edge coat it too?
@TeeBoyd888 ай бұрын
Beautiful 😍
@marinamakesart8 ай бұрын
🥹❤️🙏
@fairydustnpeppersacksherzo77939 ай бұрын
Did you have to seal the ribbon or metal frame before pouring resin over it at all? Thank you! Your piece is lovely!
@marinamakesart9 ай бұрын
Thank you so much ❤️ I did not seal the ribbon or metal and just placed it as is, usually these items are okay without sealing
@alittlexen8 ай бұрын
I'm trying to do a DIY resin photo block, and this is exactly what I was looking for! I watched another one of your videos and you sanded it and used a top coat for one of the blocks. Why didn't you need a top coat for this one?
@marinamakesart7 ай бұрын
This is just my personal artistic style, I treat every block as it's own unique piece and only top coat if I feel like it'll elevate the piece. I find that I like larger blocks without the top coat and I like smaller blocks with the top coat, but there are always exceptions so I just do what feels right to me in the moment ❤
@BekbekE5 ай бұрын
I decided to preserve my daughter’s wedding bouquet but I didn’t think to do so until she dropped off the spray and bouquet after the wedding, so now flowers are dried with silica gel, some air dry and some pressed. (Silica the best) but I have no idea what I’m doing. I have an acrylic tray with handles. My first question is did you seal the area where you installed the handles? (From your other video) and 2nd I’ve invested so much money already so I purchased self laminating sheets for the invitation. Do you think that will seal it properly. I’m so nervous I’m going to ruin her bouquet even though we had no plans to keep it initially. Thank you for your videos and any advice is greatly appreciated.
@marinamakesart5 ай бұрын
Going to try to answer your questions here: (1) The tape on the tray is to protect the acrylic and handles from resin and I've never had to seal the area with the handles-- as long as the screws are on there snug, you'll be okay when it comes to that concern (2) I've never used self laminating sheets, so if you're worried, it's always best to do a small tester. Use a piece of paper to replicate the invite and try to put some resin on it and see if it seeps through. When it comes to laminated paper, the vulnerable areas are usually the air pockets closest to the invite since it creates an opening to the invite. If you look at the laminated sheet, and it's air tight, that's a good sign that it should be ok.
@NargisAthar4 ай бұрын
this is gorgeous. why would you not use a silicone mold?
@katlegonhlapo404011 күн бұрын
How do you measure since you Pour everyday till you get to the top?
@micaelaskyee7 ай бұрын
How long does this take to make?
@StarkCrystal4 ай бұрын
Have you ever added lights to these types of projects? I'm trying to figure out how to add the lights since the project is facing me instead of facing downwards, which would make it easier to place the light cord towards the back; however, I need to be able to see the front of the wedding invite, so I can ensure the flowers aren't blocking it! Any ideas/suggestions you may have?
@yadnyabagul89137 ай бұрын
Can you please tell me how much resin you need for this masterpiece?
@marinamakesart7 ай бұрын
About 1.2 gallons
@yadnyabagul89136 ай бұрын
Ok and how can I decide that how much resin I need for 1st layer or 2nd layer or 3rd layer?
@Epoxid_Geschenkideen3 ай бұрын
How much Resin did you need ?
@CeliaArribas-v2m9 ай бұрын
What resin are u using?
@marinamakesart9 ай бұрын
The materials are linked in the description box. This is KSRESIN liquid cast.
@CeliaArribas-v2m9 ай бұрын
thanks! @@marinamakesart
@veronicadensey56025 ай бұрын
How do you price an item like this as it seems like it took about a week. Im struggling with pricing.
@marinamakesart5 ай бұрын
A project like this usually takes me months, because flower drying takes several weeks + the pouring does as well, then I'm juggling this project amongst other projects that are coming in and being shipped out. How I calculate pricing is to estimate how much the materials cost for a piece, add on a overhead fee (to cover a portion of rent/utilities/shipping fees/transaction fees) and then add on how much I want to pay myself for the hours. Hope that helps!
@Kellykins19 ай бұрын
It looks lovely but you are showing your clients' details.
@MsDana-mo9fp9 ай бұрын
You said, " this is what I am do-ink". What is "do-ink"? Do you mean "doing"?