How to Adjust a Pilot Valve

This video will show you how to adjust a Pilot/Unloader Valve for your constant-run air compressor. This is a very co​mmon Conrader brand valve used on many types of air compressors. To purchase a replacement pilot valve visit mastertoolrepa...

[@blocktrowel]

thank you for getting back to me the model number on the compressor air compressor specification is TB - 5520 GP

[@MasterToolRepair]

Is it made by "Lofftol or "Emax""? The only match I get on Google anyway is the TB-5520P compressor that does use a Honda GX160 engine. This is the only model I can find that's similar to the model# you gave me (click on the .pdf link below to view it): lofftol.com/pdf/petrol-engine-driven-air-compressor.pdf If this isn't it, then you can certainly email us a photo of your original Pilot Valve to [e-mail] and we'll do our best to match one up for you. Thanks!

[@eldigitom9680]

excellent demonstration on adjusting this valve!

[@BrokenRRT]

Thanks for your time making and posting this.. Helped a bunch!

[@blocktrowel]

I bought a mega power honda gx160 20gal gas compressor.but pilot valve seems like it's not working.i tried adjusting it but no luck,the guy I bought it from said he used it for just a few minutes and that was it.It's basically in brand new condition.but want to buy a new pilot valve and want to get the right one.this is where I need help honda gx160 twin cylinder 20 gal tank great vids

[@MasterToolRepair]

Thanks Frankd! Well, it would be best to have the model# off of the compressor, do you see one somewhere on the main decal somewhere? If you don't have a model# we can still find you a replacement Pilot Valve I'm sure. Click on the below link to view the Valves on our website, first: www.mastertoolrepair.com/air-compressor-parts-pilot-unloader-valve-controls-c-25_3.html Does it look like the "RCB-style" Pilot Valve in this video or is it different? Hopefully you can tell which style it is by viewing them on our website at the above link; I'd be glad to help you from there.

[@antoniomancini8738]

thank you for the information very helpful some compressors also have a setting screw on the side that will adjust cable setting that goes to the carburetor so you can set the speed of the engine just thought I'd mention that

[@MasterToolRepair]

This is true, thank you for mentioning this! Depending on the type of Pilot Valve on the unit, you may have this throttle/idle adjustment.

[@blocktrowel]

thanks again for all the help if it makes it easier sending a picture I'll do that

[@MasterToolRepair]

I think the best thing to do would be to click on the below link where we list the full line of Conrader Pilot Valves and see which model looks most like yours, first: www.mastertoolrepair.com/pilot-unloader-valve-controls-conrader-pilot-valves-c-25_3_682.html If you can't locate it there, feel free to email a photo to [e-mail] (there is also an email link on our website). I'm sure one of our sales associates can match up a replacement for you. Hope this helps and thanks for the comments!

[@blocktrowel]

the tank says mega power by air solutions..says conrader on pilot valve also has the muffler on side of it.not with a screen vent but has a like wrap around sponge air filter..

[@kylew1192]

Great video worked great on my spartan equipment 6.5 hp compressor.

[@luigiprovencher]

If I were to buy a new one do they come pre-adjusted or would I still have to do this adjustment myself?

[@MasterToolRepair]

These Pilot Valves come pre-adjusted, or rather "pre-set" so you don't have to. You would simply choose the Pilot Valve with the correct pre-set pressures, and install it on the compressor (along with the unloader tube and throttle/idle control). You can view our selection of Pilot Valves by clicking on the below link: www.mastertoolrepair.com/rcb-style-pilot-valves-for-pumps-unloaders-emglodewalt-style-p-2.html

[@jjgfreel]

Master Tool Repair

[@roberthopkins4700]

well I was unable to find anything to do with wiring a older sullair air compressor and I needed this badly

[@blocktrowel]

Ng style combination pilot.check valve

[@MasterToolRepair]

Great, at least you've been able to narrow it down to the basic style of your original. Honestly at this point all you need to do is confirm the PSI settings you need (cut-on pressure and cut-out pressure) and what type of inlet and outlet thread you need. All of the Pilot Valves on that page on our website has this information in the description. Hopefully one matches up with what you need!

[@blocktrowel]

and unloader valve