How to adjust The FBL on the OMP Hobby M1/M2

  Рет қаралды 6,440

WestHobbiesRC

WestHobbiesRC

Күн бұрын

Пікірлер: 34
@alvintarrer6914
@alvintarrer6914 6 ай бұрын
Very,just purchased m1 with pocket radio,just turned it on crashed three times,ordered rotor blades this time thought I bind the two together flew it the second time seems like it had a mind of its own😢, damaged frame rails,feathering shaft rotor blades good,flying drone not like a heli. Appreciate tinkering on these heli, doing good...thank you sir
@alangrant7349
@alangrant7349 11 ай бұрын
Jeff, just found this video. I fly my M2 like I stole it. Throw it around, fast flight, big loops, rolls, flips, etc. But I do have a question, why do you slow down your agility? What is that really doing? I'm lost when it comes to all these adjustments. Trying to learn man! Thanks for all your videos.
@alangrant7349
@alangrant7349 11 ай бұрын
I have an M1 as well. Both are the newer EVO models. I don't fly my M1 as hard cause it's harder to see. I may actually work to slow it down some for lazy back yard flying.
@nfavor
@nfavor Жыл бұрын
Jeff, just bought an OMP M1. I watched the video a few times but wanted to make sure I have it right. For M1, change gyro for elevator and aliron to 3, change agility for boyj(?) elevator and alieron to 1? Thanks
@westhobbiesrc8051
@westhobbiesrc8051 Жыл бұрын
Hello! Yes, change Elevator and aileron gain to 3. I like 1 for Agility but that’s a user preference thing. Start at 5 and lower it till your liking.
@Thrashaero
@Thrashaero Жыл бұрын
Wouldn't the rate/speed dictate agility? what is agility adjusting?
@modelaircraft6576
@modelaircraft6576 3 жыл бұрын
Nice man 👍🏾 I’m actually considering on getting the OMP M1, you know something I can fly indoors without going to the field. I just got the align kit halfway done, the only issues I might have when I’m is trying to find the max RPM numbers to safely set my esc Govern-a, i will be using 60amp castle or hobbywing
@westhobbiesrc8051
@westhobbiesrc8051 3 жыл бұрын
Every one should have a M1 and M2! Both are incredible helis! Awesome man! It’s looking good! If your setting up govern with castle you have to put in your gear ratio and head speed you want and it tell you what percentages you put in your radio.
@petrbaxant
@petrbaxant 6 ай бұрын
Good video, but about neutral setting - how to sets the neutral position? it is same like other - by elevator on transmitter? I dont understand, how to sets the neutral for starts - to heli go up only by throttle like on simulator - my heli goes to front and fall after start, so I thing the neutrals for elevator and aileon are set bad.
@carvingfool
@carvingfool Жыл бұрын
Great video, how do I turn the pitch down to make it less sensitive? Thank you in advance!!
@westhobbiesrc8051
@westhobbiesrc8051 Жыл бұрын
Thank you! You would go into the FBL and go to pitch and adjust to your liking. Are you trying to slow down the rotation rate, or the overall cyclic pitch?
@carvingfool
@carvingfool Жыл бұрын
Just want it to be less sensitive, it seems to go up and down as a beginner it’s super sensitive, please advise. Thank you
@TheDesertraptor
@TheDesertraptor 3 жыл бұрын
Do these settings adjust the rescue/stability option. It feels very sluggish
@westhobbiesrc8051
@westhobbiesrc8051 3 жыл бұрын
No they do not adjust the rescue/stability option. Rescue adjustment is done in the TX meaning how fast it flips over and so on. Feeling sluggish as in while you were in rescue or just normal flying? Try speeding up the servos and turning down the agility
@TheDesertraptor
@TheDesertraptor 3 жыл бұрын
@@westhobbiesrc8051 in rescue/stability mode it takes a lot of stick to move. DR/throws are all at 100% I guess it's changed in the fbl system
@westhobbiesrc8051
@westhobbiesrc8051 3 жыл бұрын
@@TheDesertraptor So yes adjusting the servo speed and agility will also make a difference in stability mode
@jakelang4387
@jakelang4387 3 жыл бұрын
I should fool with mine but it seemed good to me out of the box..but this is good info man..I love my m2
@westhobbiesrc8051
@westhobbiesrc8051 3 жыл бұрын
The M2 is perfect out of t box but this for people who want to tune things and change it to there style. Like me I wanted the servo speed faster
@jakelang4387
@jakelang4387 3 жыл бұрын
@@westhobbiesrc8051 I need more servo speed ..I should watch your video slowly so my ADHD can comprehend lol for now I gave it negative expo..like my sticks tight
@westhobbiesrc8051
@westhobbiesrc8051 3 жыл бұрын
@@jakelang4387 negative expo will only take the stick dead band out. That’s not going to make the servo speed any faster. It’s super easy to speed the servos up. 5 blinks is stock and mine are set to 9 blinks
@jakelang4387
@jakelang4387 3 жыл бұрын
@@westhobbiesrc8051 I'm only usetoo flying micros ,so I do like fast response..maybe that's the answer. I try it out .thanks
@westhobbiesrc8051
@westhobbiesrc8051 3 жыл бұрын
I like my helis very fast and can’t stand expo or dead band so I try and get it all out. I would go up 1 blink at a time till you find your liking.
OMP M2 V2 : FBL Programming And Adjusting (FreddyCanFly)
18:33
Freddy Cordova
Рет қаралды 29 М.
OMP Hobby M2 Servo Arm Replacement
15:23
WestHobbiesRC
Рет қаралды 5 М.
VIP ACCESS
00:47
Natan por Aí
Рет қаралды 30 МЛН
Cat mode and a glass of water #family #humor #fun
00:22
Kotiki_Z
Рет қаралды 42 МЛН
HOW TO adjust the OMPHobby M2 Flight Controller
6:55
Buddy RC
Рет қаралды 32 М.
OMP M2 V2 - Fixing the self leveling issue.
7:43
ArcticRc
Рет қаралды 22 М.
OMPHobby Evo vs. Goosky S2 flight time comparison
17:31
Steve Bage (Smoggie)
Рет қаралды 10 М.
freddy can fly (throttle and pitch curves)
14:49
Freddy Cordova
Рет қаралды 103 М.
OMP M2 V2 : Is the swash plate actually level ??? (FreddyCanFly)
15:13
M1 & M2 Electronic servo trimming the OMP helicopters
4:00
Buddy RC
Рет қаралды 16 М.