How To Align the Pard NV008 LRF Laser Indicator

John Farbrother - 2018 BFTA & WFTC SPRINGER CHAMPION - from Optics Warehouse demonstrates how to quickly align the laser range finder on the PARD NV008 LRF.
CLICK LINK TO SHOP: bit.ly/2keEX0Z

[@Skullpain]

I have the newest version (NV008SP LRF) and I am able to adjust by following the below instructions. When you are in night vision mode and have activated the range finder, simply press the menu button. The menu will come up but disregard it. Just simply long press the + button. The adjustment screen will come up once you release the + button. *Instructions found on a random internet posting: “The laser is visible as a flashing vertical line If the targeting box is not aligned with the laser flash, the position of the targeting box can be adjusted as follows: 1. Select Night vision mode 2. Switch on range-finding 3. Open the main menu (no items need to be selected) 4. A long press on the + button will open the targeting box sub menu with X and Y values displayed. 5. Use the + and - buttons to change the values and move the targeting box to the desired position, and the OK button to move between X and Y. 6. When the targeting box is in the desired position, a short press on the MENU button will close the menu”

[@franktuin3809]

Great, thank you. Gr from Holland. 😃👌🏼

[@OpticsWarehouse1]

No problem, Frank. Glad you liked it!

[@sandyschupper8401]

Thank you for making this video. I hope I don't have any trouble and I doubt I will but I'll keep you posted. I have a NV008SLRF. So many people were telling me that you don't have to do that. And I'm really surprised that these instructions are absent from the manual or their website. Or am I missing something?

[@keithrowe99]

Can you alter the actual laser splash so it’s nearer to the actual cross hairs? I heard might be able to prise off LRF plastic cover and alter screws? Help! 👍

[@evgenyb8886]

What kind of sight can withstand the return of large-caliber rifled weapons, and is designed for cartridges, .30-06, .300, .375H & H, etc., can also be used on smooth-bore and pneumatic hunting weapons?

[@ellobo1326]

I just tried this procedure with my new NV008s and when I have the IR pulsing in my screen in night mode and long press the menu button, it turns my red laser on, but doesn’t bring up the menu shown in this video. My pulsing light is horizontal in the screen and not vertical. The indicator is almost centered, but slightly to the left of center.

[@liberospizzapastaborza2464]

hi iv just bought pard 008s lrf the instructions are not great.can somebody please explain to me how to line up mt rangefinder with my rectical mine is way off,step by step if possible please.thank you

[@musaedalqattan8976]

on the screen, as with your zero check moved it down and to the left of center. Or if you want to adjust the whole scope to get the cross hairs

[@Shooting-Up]

Awesome I never realise you could do this I always wondered how to range find in the daytime lol Thanks for this

[@VerminHuntersTV]

Will the cross in the box always be where the laser is pointing now no matter what range you are shooting at?

[@OpticsWarehouse1]

sorry we just realise we had made an error on the previous reply, the PARD 008 LRF will only be exactly on the cursor at the zeroed range, because of where the rangefinder is located on the side of the 008 it will have some degree of crossover because of the angle between the laser output and camera recording the image to display on the screen, this will only be a small amount but worth mentioning.

[@therodenthitman]

Any videos or tips on how to get the PIP to be centered on the crosshairs? Is it just a matter of shimming so the crosshairs are dead center on the screen?

[@OpticsWarehouse1]

Hi there. From we can tell you just have to slowly move the crosshairs across until you get it where you want. Thanks

[@alfadecor4541]

Hi can you help me to set up the Pard DS35 rangefinder

[@pistolpete938]

Do you have to manually turn the rangefinder on and off every time you locate a target or is it scanning constantly?

[@OpticsWarehouse1]

Hi, you can turn it on and off with a button push if you choose to but you can also leave it on and it will constantly update the range as you scan. Thanks.

[@MinggaangLejau]

Hard to find how to move the LRF laser indicator.. I think maybe this is secrets from the manufacturer, because I cant find at Menu.. I use pard NV 008 LRF from 2020 to 2024 and I never know.. I always try to find, push and hold all bottom but not work.. lmao.. 😂😂😂 Thanks for your video.. Now i know.. Thank you.. 😃😃

[@matthewtomlinson9128]

How do i get the yard or metre up not showing on mine

[@JoseGarcia-sy4hw]

Thank you for the information on that video I have a question though I tried everything you did and my light does not move what moves is a little square with the cross in it my light is kind of center to the cross of my radical I can’t see it in the day hopefully you can reply back to me and help me so I can move the light out of the way thanks

[@OpticsWarehouse1]

Hello Jose, unfortunately you are unable to adjust where the LRF laser points, you are only able to adjust the cursor so you can accurately tell the range you are shooting. Kind Regards OPW

[@ewanmacgregor3056]

Hi, Im fairly new to airgunning. I have just purchased the Pard nv008lrf. I have my fac rifle zeroed at 50yds for my conventional scope. Its a mill dot reticle and im used to hold under and hold over with it. The pard reticle doesn't seem to cater for milldots and in particular hold under. Am i just thick? Any advice would be welcomed by this novice, thanks. Ewan.

[@OpticsWarehouse1]

Hello Ewan The latest software update has a reticle that features both hold over and hold under points, however another way round this would be to zero at the highest point of the trajectory, and therefore you would only need to use hold over. i hope this helps with your question, please feel free to ask us about any other features on the pard 008LRF Cheers OPW Team

[@Peteecc1]

What external monitor are you using? And were are they avaliable from. Thank you

[@OpticsWarehouse1]

Hi there Peter. We are actually using a phone camera held up to the eye-piece! Unfortunately the NV008 doesn't record its own menu in recording mode so we had to improvise!

[@Peteecc1]

Optics Warehouse thank you

[@MrRavaneda]

Can I swap the colour the yellow to another colour ???

[@Ciara12234]

Do have to use hold over when u use the lrf or re set pard zero be fore the shot,

[@OpticsWarehouse1]

you do have to use hold over as the PARD 008LRF does not have ballistic software built in.

[@peewee007654321]

Optics Warehouse Is it a feature they’re going to add or is it not possible... I like the look and features of the pard008 but would be very impressed if it could do what the (hehem) atn 4K pro can do which is automatically adjust the reticle to the target 🤔

[@stuartkerr2205]

Hi, Do you know when these will be back in stock? Thanks

[@andyhargreaves5192]

Hi mate I’ve been asking same question myself lately but I’m hearing next week finally...😅👍🏻

[@normski262]

Something I have not thought of; If you store this away, for a few weeks or months, remove the 18650 battery, does it keep the setting, or is it, everytime Bat, runs out, its back the start again ?

[@OpticsWarehouse1]

Most units retain a memory -otherwise everything would have to be reset upon removing batterys for recharging etc each time

[@billholcombe2679]

Am impressed, simple, strait forward, why is this not explained in the manual?

[@OpticsWarehouse1]

Thank you for the review, we are not sure why this is not shown by Pard in the manual, but we are glad this helps you. Kind Regards John OPW

[@mickanderson3904]

My range on the pard 008lrf indicates on the left side and when using the rangfinder on a white piece of A4 cardboard at 15m this can go to 28 m same piece of board can you help please

[@mickanderson3904]

Sorry it's on the right side

[@OpticsWarehouse1]

Give us a call on 01803 611 895 Monday - Friday and someone should be able to help you out, thanks for watching!

[@exposure2297]

This isn't the same on the nv 0008s lrf, is there a way to move the cursor on this model.

[@padiman1201]

Hi, it is the same on the NV008S LRF as I have just done it. Give it anothwr try...my firmware is at PARD_EN_202208020.

[@brianskinner24]

Hello, My laser rangefinder is right on the edge of the screen, how can I move it to the left a bit so I can use it. Thanks

[@OpticsWarehouse1]

Hi Brian, if the video isn't helping out then please feel free to give us a ring on 01803 611895 and one of the team will be happy to help. Thanks!

[@dingfeldersmurfalot4560]

I have the same problem. Did you call them, and if so, what did they tell you?

[@brianskinner24]

@@dingfeldersmurfalot4560 They told me to send it back to where I bought it, asit cant be adjusted.

[@dingfeldersmurfalot4560]

@@brianskinner24 Thanks for the heads up. Did you do that and get a new one, or just abandon that choice as unworkable going forward?

[@brianskinner24]

@@dingfeldersmurfalot4560 I didnt bother using it on a 17 as it doesnt drop much dont really need it.

[@happyhunters1924]

Can you do this with the pard 008s lrf

[@padiman1201]

Hi, it is the same on the NV008S LRF as I have just done it. My firmware is at PARD_EN_202208020.

[@ilinvi]

А можно сделать видео отсрела мишени на 50 метров и 100 метров.

[@padiman1201]

The video will record at any distance, so 50 and 100 metres will not be a problem

[@davidpardieu417.]

PARD

[@aryowiduri]

insert card first