PARD DS35 Operation Guide | Some FAQs you care most | ⏭ Menu Mode

[@DjFabioLux]

I don't understand how you managed to make the Ds 35 videos better than our vision looking through the crosshairs 😏😏

[@kiwicam6419]

I see the ZeroRange(yds) in this video allows for 2yd increments whereas mine DS35-50 only allows for 5yd increments. No idea why it doesn't do one yard. It would also be good to more decimal places to improve the calculation accuracy. eg ammo weight to 2dp so we can use the manufacturers numbers. It seems to use imperial as the base unit instead of metric. So my ZeroRange(m) is set at 22.71m. I can't use 21m or 22m. For a Wildcat PCP.

[@highland-oldgit]

Does the Ballistic Calculator take into account the Yaw and Pitch of the scope ?

[@cruisinkruty4405]

about ready to return mine. Instruction guide print is super tiny and in playing with it for 3 days now I cannot grasp turning it on and working my way through the menu. Its totally frustrating. I guess the electronics and computer language is not for everyone.

[@matejlachman5895]

Is it possible to set the scope to not hide tilt indicator after a while? I love my pard ds35 and use it both for hunting and target shooting. I relly on the tilt indicator, but it stays on screen only for short while. It would be awesome if I could make it stay there for logner so I do not have to break thge position so often to enable it again...

[@iw.blackwood]

Agree

[@derekpearce5919]

Agree, needs to stay there all the time

[@FranciscoSousa-d2p]

Parabéns pela dicas

[@andrewgrant2982]

How do you change profiles from A=>B etc

[@mikethekiwi2324]

It shows on the video changing Zero by 1 yard at a time, mine will only do 5 yard increments, why? How do I change this? Also my recoil activated recording says it's recording, but nothing goes to the memory card. While this is turned on, it wont manual record either. Both these seem to be firmware related, but I have the March 2023 firmware.

[@yullex3338]

I insert the parameters in reticle adjustment axis(x and y) but after a while they get formatted, can you help me?I want to clarify that I performed the correct saving procedure!!! But after some time the parameters entered by me are deleted, I don't understand what could have happened, can you help me?

[@mali590seray]

my ds35 zero range setting is set to 5 yds and multiples, like 45-50-55, how can I set it to 1 yds?

[@JosipRegović]

Hello, I bought a pard ds35 50 and noticed that every time I turn on the optics, it is set to a maximum magnification of 8x. Every time I have to manually set it to 4x magnification... please someone help me solve this problem? Odgovori

[@FodzyleGEEK]

The zero range setting is definitly not like that ! the distance clic go to 5 yard to 5 yard and it's a real trouble when you are in metric systeme with 4.57 metres.

[@Pardvision]

Hi dear, we will shot a more professional video to show you how to zero the device.

[@FodzyleGEEK]

Ok I'm waiting for it and the link. Because actually set it in yards are not a good things for us who live in a metric country, Hope tonsee a changé tonin your upgrade software

[@kevinparkin8984]

good

[@Pardvision]

We are holding an Christmas event in our Facebook Group, please click this link to join us . : facebook.com/groups/pardnightvision/?mibextid=oMANbw; We would like to invite you to join the event : kzbin.infoih0ZnF5suP8

[@Tajikistan_Hunter.]

everything is fine but there is a minus and it is very large and not unimportant, the ballistic calculator does not take into account the angle of height and inclination, and this is a problem for shooting at an angle, and almost 90% of the shots are made at an angle, the ballistic calculator works at 10%

[@ChhormPanha]

please explain me again about altitube

[@josemariatorreslatorre7045]

Ponerlo en español 😢

[@brynybach7741]

How can you expect anyone read the captions on the screen when they are only on for a few seconds Obviously no one who made this video has watched it after, totally useless unless you freeze frame each and every one 😖😕👎

[@vanderbb01]

Pause the video as needed