How To Apply Roof Coating Henry 100% Acrylic Dura-Brite White Elastomeric Step By Step DIY

[@phillhuddleston9445]

I would recommend a second coat, it will last longer and reflect sunlight better.

[@BlkOut305]

Yes it seems a little light

[@untilucantgripit]

Second coat is needed for sure!!!!

[@davidr8307]

very nicely done, video was very informitive on the roof process. Thanks

[@aechiu]

How did you clean the roof? Power wash? Thanks looks good

[@Furtivo95]

Looks a little thin in certain spots. The old layer shows still a bit. Did you give it a second coat? Isn’t a silicon based layer longer lasting and higher performance than acrylic?

[@wolffforge4839]

You can get 5 gallons of acrylic sealer for the price of 1 gallon of silicone. Acrylic still has a 10 year life as long as there is no standing water.

[@Furtivo95]

@@wolffforge4839 that roof he did was flat. He’ll have to recoat every 7-10 years. Silicone is lifetime guaranteed. Plus the labor to get someone to do it again is the real cost. Why build your house of straw when you can build w bricks?

[@deborahbaca1345]

​​@@Furtivo95That's not what all the experienced roofers say about silicone though. I hear silicone can't be patched. Nothing sticks to it, not even silicone.

[@ThinkingAhead54]

From what ive read, if you really want to see a temperature drop (15°+) you need 3 to 4 coats..

[@jcerino3080]

how long of a wait in between the coats?

[@MelodicMizeryPs3Vids]

Can u use a regular brush for trim if its aluminum fiber paint

[@ericmosley9906]

Yes..

[@MelodicMizeryPs3Vids]

@@ericmosley9906 thanks yah ive used a 3 inch a few times for the borders and it worked well. you just gotta make sure if you do a piece do it all at once and fast because if it half dries itll just chunk up and look bad

[@codyabel4766]

does it work on plywood?

[@Mr.Cuscatlan]

Can you put it on shingles too?

[@victorvalenzuela6949]

Yes 👍🏼 You would need to make sure to put it on thick roll it on or bush the portion of shingles that lift up or where you are getting the leaks. Then roll it. 👍🏼

[@ericmosley9906]

Do not recommend....​@@victorvalenzuela6949

[@GritoCuttem]

Does it work on fiberglass?

[@cynthiapeterson7649]

Does this material stick to metal?

[@jalizaliebenberg2177]

I want t0 replace my rooif with planks. The roof is a pitch roof. Im going to use gum planks wich i am going to harvest on my own property. Will this work for me. Climare is hot and humid.

[@1982pantro]

I thought you couldn't apply to any type of sanded shingles. Its on the spec sheet too.

[@bobbylopez3581]

Can it be used over #30 felt ? ( Tar paper)

[@repoillicit2196]

Shouldn’t you pressure wash first?

[@mikesolns1364]

How much of a difference does it make if it's not perfectly clean?

[@repoillicit2196]

@@mikesolns1364 you pressure wash to get rid of the dirt grim etc. This is so the elastomeric adheres….

[@mikesolns1364]

@@repoillicit2196 I'm trying to DIY and don't have a pressure washer. Could it still work if I clean it as much as possible? Thanks

[@repoillicit2196]

@@mikesolns1364 you could Order a nozzle that goes on your hose that will give extra pressure

[@mikesolns1364]

@@repoillicit2196 Thanks pal. I appreciate it

[@LuisSanchez-hc1sg]

How much would the labor cost be for this job?

[@raiderfrankdatank]

Man, were doing this roof with a very thick coating and its taking a while to spread the paint. Tiring. Is there an easier way?

[@frankshandymanservice]

Best way to spread in the open area is with a roller. Just spread the material on to a paint tray and roll it off from there. Worked great for us.

[@DAGG2]

Applying primer would allow you to use less coating. And help it from peeling in the future.

[@frankshandymanservice]

Good to know, thanks for watching.

[@brooklynboi11207]

Any recommendations on the primer?

[@aldogomez2681]

Shouldn't you be tied off working so close to the edge?

[@justme-yj3bu]

silicone is the best hands down!!!

[@trustmebro8500]

The narrator sounds like lil Moco

[@justme-yj3bu]

acrylic just stays cleaner

[@untilucantgripit]

Go with silicone as well cost more but last longer better over all.

[@johnberry1107]

2 coats? Stay safe.

[@CowboyBillUSA]

Apply two more coats.

[@davidattig9420]

Be careful not to brack the large bubble of roof membrane may course water to leak in roof after rain ☔ .😢😂😮😢

[@davoyan777]

Takes for ever to dry

[@k.anthony7460]

If it was easy, anyone could do it.

[@albertomendoza8722]

I wouldn’t even recommend applying without priming surface first. 🤷🏽‍♂️

[@deborahbaca1345]

Prime with what?

[@rollandjoeseph]

Seems too thin

[@freedombuy4672]

thank you my bro.......

[@martinwood9876]

A video on how NOT to apply elastomeric coating. Pity you did not bother to read the manufacturer’s installation instructions. For this product you would need 3 to 4 buckets for 800 sq ft. Needs far more extensive prep than you did. Feel sorry for your customer.

[@JoseMiranda-cv3wc]

You forgot to wash it ese.....😂

[@ericmosley9906]

The fact that u don't know a roof from a ceiling... is embarrassing to all handymen...SMH. POOR WORK. ... "SWEEPED".. 😂

[@conductorjohnmthtrains2239]

Looks like your guys stretched the 10 gallons out way to much. There should not be any dark areas. But Maybe you think the customer won't get up there and look. Shame!!!!

[@frankshandymanservice]

Thanks for the comment, that material is not meant to ‘hide’ anything. We normally use primer for that. In this case, we utilize plenty of material, and even a few years after the installation. It’s still holding up great. Either way, we recommend to apply it every couple of years, just to keep up on the maintenance of the flat roof.

[@ericmosley9906]

Approximately... 1.5 gal / 1 sqft.!!!!! READ THE DIRECTIONS!!!😢

[@h.i.mmessenger2852]

So it’s waterproof?

[@SK-jw6sn]

He has no idea what he’s talking about. No flashing around penetrations and you should NEVER use an acrylic on a flat roof.

[@antoniiocaluso1071]

TERRIFIC storytelling! you know...if there's taller office buildings lookin' down on that roof, the final coat can be some sort of ADVERTISING ARTWORK !!! White is nice for solar heat avoidance, but the $$$-making opportunity is pretty-dang GREAT, too, no?? just sayin'...if if there's a way to colorize that white coating... [ man, that roof-mtd equip. sure is UGLY ]

[@jab5521]

Looks like crap 💩 😕 😐

[@thebrain6201]

Horrible job

[@josephwolfe4361]

Needs another coat..