How to apply Sea Hawk Tuff Stuff

[@jthetunes1]

Best bottom primer out there!

[@bradhuskers]

I just ordered the tuff stuff for my aluminum Jon boat. I got 2. half gallons. I don't have fancy mixers. Can I just vigorously stir it for five minutes or so with a wooden stick? And can I do the second coat 4 hours after the first? Then, can I apply the aluma hawk paint four hours after the second coat of primer?

[@tomahawksteak6672]

I used this last year on my mc kee boat . I didn't have a paint shaker . Just stirred both really good with a drill . After first coat I did the thumb test around 2 hours later . It was then when I painted the second coat . After 4 hours I felt it was ready for the bottom paint . For that I used Sea hawk af33 .

[@bradhuskers]

Can we use gluvitt first on the rivets and seams AND then apply the tuff stuff 72 hours later?

[@Boaters_hub]

I just got off the phone with seahawk. not sure if you still need answers but he said if you have a bunch of rivots leaking or a bunch of pin holes to seal those first. He did say if only a dozen or so pin holes that this tuff stuff would seal that and no additional sealer needed. But for application to Litely Sand it with 80-120 grit basically roughing up the surface to get a better adherence than start applying tuff stuff as described.