How to apply Silicone TC15 onto dense concrete | K Rend

Silicone TC 15 is a ready to use organic resin render which is applied to provide a low maintenance textured finish. It is available in different textures and a wide variety of colours. Why not visit our website for more information on K Rend - www.k-rend.co.uk

[@smoothrunner72]

I’ve this exact same product on my house for the last 5 years, from absolutely brand new, house AND product, and it’s definitely not for me. Although it looks good brand new, some five years on I’m left with very large patchy green bits, where algae has started to frown on the surface, it’s also incredibly had to wash off as the surface is textured. Only bleach wiping with a soft yard brush removes it, but at high high heights this is very difficult, so it’s definitely not maintenance free

[@da_great_mogul]

Just jet wash it and use K-Pro.

[@ferdinandbalog5361]

The sponch Bob

[@azzlegend6793]

No straight edge used at all. Would love to see that with the sun on it

[@beatonthedonis]

It's applied too thin to use a straight edge as you do with render or bonding/hardwall. He levels it with a plastic darby. Trying to level it with s straight edge would be like trying to level multifinish with a straight edge.

[@joelewis9137]

Sorry to be so offtopic but does anyone know a method to get back into an Instagram account..? I somehow lost my login password. I love any tips you can give me

[@fishertroy8393]

@Joe Lewis Instablaster =)

[@joelewis9137]

@Fisher Troy thanks so much for your reply. I got to the site thru google and I'm waiting for the hacking stuff atm. Takes quite some time so I will reply here later with my results.

[@joelewis9137]

@Fisher Troy It did the trick and I actually got access to my account again. I am so happy! Thanks so much you saved my account!

[@aliocak7808]

Hi, Great vid. how thick are the beads you used on TC15 application?

[@krend257]

Hi there, onto dense concrete/masonry beads required: - K Bead 11mm Angle beads elevated & set to minimum depth 14mm. - K Bead 11mm Movements beads elevated & set to minimum depth 14mm. - K Bead 15mm Bellcast Beads located Dpc elevated & set 17-19mm to front edge. For additional information please get in touch with [e-mail]. Thanks, Team K Rend.

[@ILOVEGERMANTECHNO]

HP 12 and regular masonary paint is ok in the splash area?

[@CB-xq5kq]

Did you go level with beads on base coat ?

[@scosy07]

You’d have no room for too coat if you done that it’s 3mm scratch , 3mm top coat then thin coat trowel on and rubbed up

[@TheBIGchaPOWski]

yes, you do, this is a thin coat system in the video...so this will be topped with TC15, the grains are 1.5mm and finished at that depth. If you were using a mono system you would use 10-12 mm beads, not the 6mm I'm guessing in the video, and leave some room for the desired colour topcoat.

[@bootsmclaughlin1438]

Can you do it without putting the mesh on b4 the 2 second coat or is it import and mush be done with it...anyone plzzz

[@travislowkicks2462]

Must be done with first coat, as it acts as reinforcement for any movement cracks(

[@Offensiveword]

K rend is too expensive....

[@enki432cooper8]

Way to many products

[@fatjonshaba7618]

It's not worth keeping you