How To Assemble onn. Swivel TV Base for TV's 32" to 65"

[@HeyItsJK]

Click the link to watch my BEFORE YOU BUY video about the onn. Swivel TV Base kzbin.info/www/bejne/bITWoYaGidyIb5I

[@OGVtvee]

Very informative ❤

[@HeyItsJK]

Thanks so much!

[@cambriaguydude]

JK this was another great Video. I agree that this Onn. Swivel TV Base is not suited for a TV that weighs above 30 pounds and/or is 60 inches or above screen size. The Onn. swivel stand is simply not strong enough to hold more than 30 pounds over the course of several years time or a very large TV of about 60 inches plus. The stand will begin to bend over time and there could be a catostrophic failure and crash after maybe 4 years. I have a 55 inch TV weighing 30 pounds mounted on this Onn. Swivel TV Stand but I positioned it to sit just 3 inches above the Base. Larger TVs of 50 or 55 inches should never be installed on the highest possible positions on this stand.! They shoud sit low about 3 inches or so above the Base. JK you were very smart to lower the TV down it might prevent a stand failure or at least delay it. A 65 inch TV needs to be on a Kanto - Tabletop TV Stand for Most Flat-Panel TVs Up to 65". A more well built stand than the Onn.

[@joef9659]

Just bought this and screw holes don’t line up with my Vizio tv

[@HeyItsJK]

Depending on the size of the TV, you might have to use additional hardware that comes with the mount. Typically it is plastic washers. But I do have to say that I remember it does not claim to fit all TVs.

[@Smoke3380]

What an unclear lame video

[@HeyItsJK]

Thanks for your feedback.