Рет қаралды 95
In this video I show you how I assemble the Draco CVDs. I show you the products I use and what order I assemble each part. These are CVDs I have designed and developed myself for the HPI Savage and HPI Super 5SC Flux.
I recommend adding grease on the joint and using locktite in the grades i mentioned.
If you would like to use standard pins instead of the Draco 3x16mm Pins you can. You will just need to replace the set screw with a cup point set screws designed to capture shafts or pins. Please find the set screws and the pins you can use on the Draco CVDs if you want to replace them. There are also rebuild kits available on my website. Please check out the links below:
M4x4mm Flat Point Set screws (for use with the Draco Pins)
www.aliexpress...
M4x4mm Cup Point Set Screw (for use with standard 3x16mm Pins)
www.aliexpress...
M3x16mm Standard Pins (an optional replacement for the Draco Pins)
www.aliexpress...
Optional Axles (If you'd like to use the Draco 24mm or 17mm Hexes without the CVDs)
www.aliexpress...
Please check out my Social Media Sites for more details on other projects!
Facebook:
/ dracoprecision
Instagram:
/ draco_precision
Website:
www.draco-jp.com/
www.draco-jp.c...
www.draco-jp.c...