How To Assemble The SOLE E98 Elliptical | Unboxing & Step-By-Step Guide From Start To Finish

[@jamespaul126]

Thank God for this video, it would’ve taken me days using the instructions provided, thank you so much mate, save me so much time and stress

[@medor1804]

Thank goodness! If not for this video, I would have had to pay a handyman or something to assemble it.

[@williamjones7821]

I'll be getting my E95 in two days (older, 10.1 inch screen). Thanks for the video! It should not be difficult, but if needed, I know your video is here. Also, the company was kind enough to send me a PDF version of the manual for my unit.

[@gjones0316]

Thanks for the video! This saved me a ton of time. The directions that came with the unit weren't bad, and I appreciated the way the hardware was packaged and organized by step. But the printed diagrams were really small and hard to decipher. I purchased the E95 (2020 version), and most of the parts are identical to the E98. The biggest challenge I faced was with one of the bolts connecting the two main frame sections; one piece was slightly warped and I couldn't get the holes to line up exactly. I had to shave off about 1 mm with a Dremel to get the screw to meet the threads.

[@ParallelWealth]

Thanks so much!! Have to assemble this today for my wife and you probably saved me a few hours!

[@dr150]

Thanks for this video. It really helped configure most of my E95s Elliptical. Remember folks, install the cup holder BEFORE the screen or you'll be doing double work!

[@SimbaSound742]

took me four hours from unboxing to final assembly thanks to this video, otherwise would have been a whole day. Great stuff

[@kellyhealey2396]

This was an EXTREMELY helpful video! The step by step directions and showing all the parts, as well as the instruction guide, made the set up go very smoothly for us. The issue you mentioned at 18:50 in the video was a good tip. It is part of directions for Step 4 Plastic Parts item #2- Make sure you install the plastic cover pieces 97&98 first then 95&96 afterwards. The set up still took my husband and I about 4 hours, but without the video it undoubtedly would have taken MUCH longer- thank you!!! 👍👍👍

[@SonnyMiller]

Great video! Thank you for taking the time to film and share this video! My E98 arrived 4 days ago. And, I wasn't able to assemble it due to my job. But, I finished assembling it this morning while reading the user manual and watching this video as a guide! It's working perfectly! I can't believe how quiet it is compared to other ellipticals I've used since 1998! Keep up the great work my friend! 👍💯

[@Recordings-ov4hv]

Is this elliptical better than the 95 or 25? I am a big fan of Matrix but they're too expensive so I'm thinking of buying a Sole elliptical. Do you recommend? Many thanks!

[@restitutocariaso9820]

You’re awesome. Just put the thing together last night. Watching you do it made the process much easier than trying to follow the manual.

[@genericreference6969]

This video was great and kept me good company as I assembled my own machine. Nice to have this “hand on my shoulder” to make things clearer! :)

[@Robroy1956]

Once I opened the assembly guide, I knew I wasn't following that. I then found a video of a guy that assembled one on amphetamines in four minutes. I had about given up when I found your video. Thank you for putting it together.

[@MrJimmy-ox7fq]

You are like Hercules! Lifting that thing to roll it around was the hardest thing to do for me. You made it look light as a feather! I'd write more, but I need another ice pack for my back! Keep up the good work!

[@MasteringMayhem]

Take care of that back. Thanks for supporting the channel 🙂✌️❤️

[@SirCarcass]

Thank you for making this. I just got an E95 and have been constantly referencing this video as I put it together. It's not very complicated, but the pictures in the instructions leave a lot to be desired in what order and direction to do some of the hardware, and your closeups and explanations have helped a ton.

[@MasteringMayhem]

You’re very welcome. Appreciate the support 🙂✌️❤️

[@EzoMan1]

Assemble my own E98 at home. Your video was a lot of help. Thanks)

[@alexanderangelkovski9141]

Thanks for taking the time to post. Very helpful! Made my experience enjoyable

[@taheernaraine2564]

THANKS SO MUCH FOR MAKING THIS - YOU HELPED ME THROUGH THE ENTIRE PROCESS 👏🙏🙏🙏 Your video was Much Better Help then the instructions!!!

[@henryblume8764]

Thanks for taking the time to post. Very helpful!

[@Jim-gn5hp]

Very nice job! I agree with SirCarcass below. The directions that came with the unit leave a lot to be desired. By watching your video, I think I knocked at least 2 hours of assembly time. Thank you!

[@metoo1389]

Thank you so much! I would have never gotten this together if it wasn’t for your video!!!!

[@MasteringMayhem]

You’re very welcome 🙂✌️❤️

[@foz8888]

This video was amazing and extremely useful as reference guide when I was assembling the E98. I referenced it many times and the E98 was a beast. Excellent video and kudos for making it! Keep up the great work!

[@Melissa-hy9in]

Thank you! This was invaluable in assisting me in the e95 assembly.

[@MasteringMayhem]

You’re very welcome 🙂✌️❤️

[@markbastianelli6202]

Thanks for making this video it helped with assembly. I have a weird clanging when I speed up. Called company they are sending service person. We’ll see...

[@lordspen5882]

Thanks dude, helped me out a bit.

[@Tcorriders315]

Thank you, this assisted me with installing my e95.

[@MasteringMayhem]

You're very welcome. Very glad this video helped.

[@zenbloke1]

Top video, E95 running smooooth!

[@MasteringMayhem]

Thanks for the comment and supporting the channel with your view. Glad it’s running smooth for you 🙂✌️❤️

[@xordoom8467]

Thank you sir, I was stuck several times putting mine together especially the Switch Wire Cap... Well Done!! I have one question though, what is the lube for and where do you put it, my machine came with a white tube of lube. I know there is a joke in this question but I'm being serious... lol...

[@aly736]

Thanks for the video, very helpfull

[@ScottFulton-y4s]

Any chance you could link the thick rubber mat shown in the vid?

[@morenoamador]

Woow that is allot of assembling

[@MasteringMayhem]

It’s what I’ll be doing until my KZbin Channel supports the family and I can focus on the channel exclusively.

[@Tbone50970]

Building this tomorrow. Not looking forward to it. Nice job

[@nerdymra8252]

I'm betting that half of Texas has gym equipment in their garage instead of vehicles because of your installation services 😂

[@MasteringMayhem]

I mean, I do have a few assemblies every week. Assembling a treadmill tomorrow as a matter of fact. 🙂

[@CingeTV]

Thank you! There's no way I could have done this just by the manufacturer's terrible diagrams and instructions. They should pay you to do their setup videos for them.

[@williammorris671]

Cool video. How do people get intouch with you when they need things put together. I mean I'm sure you have cards out and you have a business to do this but how did you get started assembling?

[@MasteringMayhem]

I started assembling things for my parents at a young age. I started the business last year on Thumbtack. It’s an app that gets contractors in touch with people that need projects completed.

[@williammorris671]

@@MasteringMayhem I got hurt on the job many years ago, had 4 ruptured discs, had 3 back surgeries. That was 30 years ago. Worked untill 5 years ago I reinjured my back, reruptured 2 discs and had to go on disability so that sound like something I might could do.

[@MasteringMayhem]

Wow. I couldn’t even begin to imagine what that would be like and how it affects someone’s life. I hope you find something on Thumbtack that works for you. Thank you for supporting the channel. We appreciate it very much. I hope your continue to heal and get stronger as the years go by. 🙂✌️❤️

[@williammorris671]

@@MasteringMayhem I will its in God's hands and I have faith. I pray every day. I exercise. I do small wood working projects. My wife does crafts. She is on Facebook, Crafts by Julie, check it out. Anything woodworking for her i do. I built a ladder a few weeks ago. We are going to a craft sale in April, she got a booth. She wants me to built 4 more ladders. Several hexagons and picture frames, oven covers, and cutting boards. Hope they sell. I know what my limits are. I just can't be still. God bless.

[@MasteringMayhem]

That’s great, keep doing what you can. We’ll check out her Facebook page when we get a chance 🙂✌️❤️

[@dr150]

I dropped a washer in the inner casing of the machine. Nothing is on the floor of the plastic casing boot. How can I access the inside to fish out the washer?...

[@lindatalmage6336]

I did the same thing! Fortunately I could see where it landed and my partner is a contractor and has an extendable tool with a magnet on the end.

[@ronlevine8873]

This isn't exactly "step-by-step". More like hit the fast-forward button and hope for the best!

[@konamanstudio2447]

😆🍻🍺😊