How To Assemble, Use & Clean a 5L Mini Keg Beer Pump Dispenser - Baridi By Dellonda

The Baridi DH49 Mini Keg Beer Pump, with Integrated Cooler, is a fantastic gadget for entertaining friends and family.
To help you get the most out of this product we have created a "how to" video that covers the assembly, use & maintenance of this incredible machine.
Once you have learnt how to clean and use your dispenser, you'll be pouring beautiful, cold pints of Beer & Cider for your friends and family.
We hope you enjoy the video! Follow us for more Videos:
www.dellonda.c...

[@ajdon71]

Is it possible to swap the generic black tap handle head for an alternative, like on machines like the Blade/Sub/PerfectDraft?

[@yolandaviera902]

Mines want dispense any beer, it’s not the co2 side… will it work if beer is cold. Will it work if I don’t wait a few hrs?

[@alanjones1759]

Show using the pre gassed keg adaptor

[@pinocchio1768]

When pulling a pint do you turn the gas say half way then once finished turn it off ? Obviously when not in use it stays off permanently. Plus how do you know which kegs have co2 & ones that don't ?

[@dellonda7602]

Hi The valve on the top is just to regulate the pressure when pouring, just use when you want to start pouring, until you finish. And The Kegs that do not take CO2 have the different fitting not the `T` Bar fitting. I hope that helps

[@shannonludlow3450]

Once a keg has been attached, does it have a time frame for how long it needs to be used in?

[@wholeycows]

Bout a month

[@liamm.1431]

How do you know which kegs don't need gas? Is there information on the keg?

[@jacobburton678]

I was wondering it would hold the (5L) keg of the Brewflo?

[@massimovecchio9920]

a quick question: the stronger spring goes near the gas or the other way around? thanks

[@hollyjollyplans3006]

Whilst the keg is in do you leave the gas turned on all the time, or should you turn it off at night?

[@AceTeale]

I just give it a turn on for a few seconds then off and pour my glass of beer do not keep gas on over night

[@paljoey337]

Really helped this mate. Do you know a website that sells the 5L kegs for this machine?

[@FKU7777]

Beer monster mate

[@FKU7777]

I checked yesterday and they don’t seem to have much, but beerwulf do under the draft Kegs section

[@AceTeale]

@@FKU7777 I typed into Google where to buy 5 litre Mini Kegs in uk, there is lots there...

[@scotron1]

Just bought 2nd hand machine but there is no springs in T bar where do I get these thanks

[@dellonda7602]

Hi, please give out customer service team a call on 01284 757575 and we can look into this for you.

[@sharoncorker8563]

Hi, the paulaner kegs that came with pump will not allow the dispenser to be inserted. Are there any others I should avoid like this. The doom bar is just fine.

[@ofiaich666]

How do you remove the gas valve on a pre gassed mini-keg? For example, Fuller's HSB Mini-kegs?

[@wholeycows]

Mine leaks all the co2 as soon as I screw it down. I'm thinking it's the co2 cartridge washer. I can't tell if the old one is till in there or not. I pressed a new one in there but it looks like it got twisted as I was tightening the cartridge down and still leaked all the co2 out. I can't find and instructions on how to change the cartridge washer .

[@antonlaringo14]

Have same problem. When i set CO2 cartridge, all co2 runn out and beer is without pressure. Didnt find any ideas or informations, how can i run it correctly and get pressure inside to beer. DO you have any progress in this problem?

[@wholeycows]

@@antonlaringo14 Yes, it was the little rubber o ring that seals the top of the co2 cartridge. I used a eye glasses screwdriver to carefully pry it out of there and pressed a new one in. Odd that it comes with extras but there is no directions on how to change them.

[@petermoore1023]

Where is the best place to find the kegs of beer? I've looked in Tesco and Morrisons and nothing

[@AceTeale]

on line is your best bet

[@grahammeakin156]

How do I replace the o ring

[@andreaernestoreani9599]

👏👏👏👏👏👏👏👏👏

[@TheBonifacy87]

Got this machine second hand, but discovered a small leak from thr bottom of the unit. Any idea of likely know causes? Maybe an assembly diagram is available anywhere? I had no luck finding one.

[@AceTeale]

Where is the leak coming from at the bottom is it from the drip tray area ?

[@TheBonifacy87]

@@AceTeale I have removed the drip tray and the bottom cover for drainage pipe. I can just about to see a small drip further inside the cavity, sort of in the centre. Unfortunately, I cannot access that area. It's not the drainage that is the problem.

[@AceTeale]

@@TheBonifacy87 Okay it sounds like a water leak maybe a crack somewhere under neath a bit of glue under there maybe ? I will try and get a assembly diagram and stick it on my next you tube video or could send you a few pictures..of my one.

[@FKU7777]

Where can I get replacement co2 cartridges mate?

[@AceTeale]

Amazon

[@mariayates3543]

Hi, is the second keg you have on show in the video compatible with the machine?

[@AceTeale]

If you ment the adnams keg then yep

[@ryankeller4864]

Any recommendations on where to get a new t pipe

[@dellonda7602]

Hi Ryan, at Dellonda we supply all spare parts for this. Please contact, 01284 757575 if you need one

[@ryankeller4864]

@@dellonda7602 I'm over in the USA, does that matter?

[@paulgaskin269]

Hi how do I know Witch kegs need co2 and witch dont

[@AceTeale]

The tops are different , the ones in video are not pre gassed Heineken kegs are pre gassed they are higher than the non gassed

[@andyparish6019]

This is either having nothing happen or is just spraying water out of the white part that says "press" (if we remove the little plastic piece that seems to be blocking the beer from moving. I'm stumped 😭

[@paulselwood1967]

How long does the beer last when it in used

[@dellonda7602]

Hi Paul, the beer will stay fresh for a number of days if stayed cold.

[@AceTeale]

@@dellonda7602 I normally have a a keg last a good week only taking a glass a day when not having friends over...

[@Keldren.]

Duuude what about the other keg u got sitting there the ghost ship, that's what I have with the red on side and top how the hell do you use that one??

[@richardwilkinson77]

Vent the keg as per instructions on the side of the keg. Pull out the red insert from the bung at the top. Then follow the instructions in this video. 👍

[@jimstinchcombe9667]

what are the two rubber grommit things used for?

[@sharpylee8274]

L

[@georgeandjamesepicadventur5074]

how do you clean the pipe at the back, or is this unneccessary?

[@dellonda7602]

Hi George, you would rarely need to clean this as its just CO2 passing through and the T Bar has a one way valve. However, we would recommend occasionally squirting some water through it.

[@patriciawagner7985]

@@dellonda7602 does the co2 mechanism have a spring?

[@darrenclark3963]

Where can you buy the cleaning kit and the Heineken adapter?

[@AceTeale]

comes with the unit

[@christopherriddell9721]

My dispenser leaks water with the drain point on shut why is this?

[@dellonda7602]

Hi Christopher, this might be a split in the pipe. Best thing to do is to contact us on, 01284 757575 and they will help you with this.

[@dee46569]

Mine won’t dispense beer any help

[@dellonda7602]

Hi, can you let us know what's happening? Is it an issue with the tap itself or the gas?

[@JohnDoe-es5xh]

My spunding valve is burping all night long, so that I cant sleep. My bedroom is the wamest room in my house.

[@sharpylee8274]

😅