This is the only video I could find that CLEARLY details how to install those pads. The most annoying part was the proper orientation of the clip and the placing of the pad in front of the tab. Nice job!
@lavarmcguirejr63936 ай бұрын
took me two days of seaching for how to put the brake pads back in could not find any until I found this video took me 5 mins to put it back in. THANKS SO MUCH YOU SAVED MY MENTAL!!!!!!
@averapaz007 Жыл бұрын
The best video on KZbin about hidráulic break’s
@griffowolfhackmine3 жыл бұрын
thanks! i spent over an hour last night trying to re-asemble a rear brake on my non-kawasaki - the design is different but the same idea is used, after watching your video i put it back together in 5 minutes!
@gtscc9977 Жыл бұрын
The soundtrack has me vibing while learning🤙😂
@aski15295 ай бұрын
Thank you so much , i couldnt figure out how the spring goes in there😂
@motorsportsgaming10864 жыл бұрын
Good information. Our rear caliper did not have springs for the the outside pad so I took a spring and made a pair. Now I now why the outside pad was completely worn down to the metal. The break's work much better. Thank you
@tomyribas68043 жыл бұрын
thanks 🙏
@fiddlyphuk64143 жыл бұрын
Hey- mine didn't come with them either, I mean WTF?. Thanks for the heads up.
@Jay-kk3dv2 жыл бұрын
SAME! Now I know why my brake was rubbing so bad on the disc. Do you have measurements on that spring?
@molloy19855 жыл бұрын
Thanks for the video! It was causing me some stress fitting my pads! Lol
@tomyribas68044 жыл бұрын
Your welcome
@MustangGT4.6L-2A6 жыл бұрын
Good video man detailed and easy Thank you
@tomyribas68044 жыл бұрын
Your welcome
@motocrosspk4 жыл бұрын
Thanks you for making it simple for dummies like me
@DoobieDoesit7 жыл бұрын
Great video man exactly what I needed ,I just got me a 150cc Apollo pit bike I'll be uploading videos and stuff too. But first I need my brakes! Lol keep up the good work
@isaackoshiol75685 жыл бұрын
High-key me same here^^ 👌🏾👌🏾👌🏾
@tomyribas68044 жыл бұрын
Your Welcome
@tomiribas97197 жыл бұрын
NICE VID DUDE, THX I HAVE BEEN LOOKING FOR A VIDEO LIKE THIS, REALY THX!!
@tomyribas68047 жыл бұрын
No prob BRO!!
@poolman82013 жыл бұрын
Best video I've seen on here, where can I get the master cylinder and brakes from for a x motos , can't find a match anywhere?
@jeronimomatijas50337 жыл бұрын
keep doing this amazing type of videos bro! you are lit
@tomyribas68047 жыл бұрын
SURE!! Thanks BRO!! May be in this week im going to be uploading a new video installing the chain.
@jkolson043 жыл бұрын
Dude! This video is amazing! Thank you for posting this!!!!
@tomyribas68043 жыл бұрын
You’re welcome 🙏
@davecarberry82122 жыл бұрын
Thank you. That little metal clip was driving me fucking nuts! Could not figure out the orientation. Thank you thank you!!!!
@sejtsagt12412 жыл бұрын
Thanks! We've spend an hour on changing brake pads and we had turned the spring the wrong way
@jasonparisi47883 жыл бұрын
You just saved my ass. Thanks!
@tomyribas68043 жыл бұрын
You’re welcome hahaha
@doobyboy213 жыл бұрын
Thank you very much for this video ! It helped me like hell ! A+++
@santiagolopez91072 жыл бұрын
Perfecto work thank you
@daledownes11584 жыл бұрын
Hi I have a the same caliper pads etc except it's for the front but everything else is the very same I'm having difficulty with the smaller pad falling out when the piston puts pressure on it pushing it out of the grooves, does your smaller pad clip into anything i have the small steel clip in place but it doesn't seem to hold the smaller pad in place any ideas thanks
@tomyribas68044 жыл бұрын
I have no idea, the pads dont clip into anything, at first before i knew how to assemble the rear brakes i though i had a piece missing maybe something that clips just like you say but no. So, i really don’t know how to help you i sorry! :( I hope you find out!
@shackerslade32156 жыл бұрын
not all heroes wear capes
@tomyribas68044 жыл бұрын
Your are right hahaha
@kevinbuhmann10433 жыл бұрын
Mate thank you very much
@JamiePineappleWyatt Жыл бұрын
My clip is slightly different, been racking my brains why the hell its been squeeling like a bitch, the clip on mine is bent out of shape a bit, I gotta fix that, thanks man!!! (Saved my ass here, I don't have the springs on mine either, I might add them too)
@oliverberglund8534 жыл бұрын
Thanks!
@tomyribas68044 жыл бұрын
Your welcome
@Jay-kk3dv2 жыл бұрын
Thanks man! I have the exact same rear caliper, but it didn't come with the two springs to hold the longer pad in place, wtf!
@edwardforney9757 Жыл бұрын
2nd how to add lubrication for bedt j familurias best production aanbest l
@nicholasschwarz59472 жыл бұрын
Hi Nick here from SA, great video firstly. My sons quad has the exact same rear braking system but it has a hand brake ( cable that runs from the lever down to the calliper) could I send you some images and perhaps you could help put this 3D puzzle back together. Thank you
@uccu30 Жыл бұрын
Rugó nincs a fékbetéten az hiba?
@markblue7773 жыл бұрын
ahh, so i am missing something from the assemble. Mine never came with the return springs. Email sent to supplier. Thanks for the vid
@arzyfauzy96705 жыл бұрын
Its much easier if you install the axle from left side first.....😁😁😁
@T33DUBZ5 жыл бұрын
Mines hard as hell to do from the left 😂
@tomyribas68044 жыл бұрын
hahaha
@jessejarmuzek4752 Жыл бұрын
What actually keeps the inner brake pad from falling out?, mine did,
@fpmoto5247 Жыл бұрын
Same
@patrik44692 жыл бұрын
tnx brooo
@tylerpacific84423 жыл бұрын
Where do you get SSR 110CC rear caliper..
@aweawe82815 жыл бұрын
ty
@tomyribas68044 жыл бұрын
Your welcome
@jonnyyael15113 жыл бұрын
You know where I can find those break pads
@tomyribas68043 жыл бұрын
Im sorry but i don’t know...
@aamirali65007 жыл бұрын
Hi I have a 125 cc dirt master and it needs front and back breaks can you please recommend me some thanks
@tomyribas68047 жыл бұрын
Aamir Ali I bought the originals, where i bought it
@tomaslakavicius3 жыл бұрын
Brake pads are now contaminated from wd40 just saying
@tomyribas68043 жыл бұрын
True
@iman80skid913 жыл бұрын
What pit bike is it. I have the same caliper Cheers
@tomyribas68043 жыл бұрын
GRF 90
@Martybrown-kc4xg2 жыл бұрын
Mines is thumpstar
@elpapito834 жыл бұрын
Where did you get that caliper from ?
@tomyribas68044 жыл бұрын
From the bike.....it the original one.
@alexchunilall50327 жыл бұрын
wht size u use to take off the bk axel
@tomyribas68044 жыл бұрын
16mm or 17mm socket :)
@nickanater5055 жыл бұрын
What song is the intro?
@tomyribas68044 жыл бұрын
Cant remember, but here you have the channel that created that song DJ QUADS.
@dirtbikewashington63666 жыл бұрын
Lol good video but why not just talk
@tomyribas68044 жыл бұрын
Thanks, is a future plan hahah.
@brandonstout56773 жыл бұрын
Music was to bad to even watch
@dirtbikewashington63666 жыл бұрын
That music is annoying
@tomyribas68044 жыл бұрын
Thanks for the advise.
@davidmorgan86124 жыл бұрын
Get rid of the crap music and actually talk and you will get more subs. Everything else was good.