how to bleed brakes on a mountain bike - Magura MT Trail Sport

[@ANATHingUnderTheSun]

Ang galing. Interesting..salamat po sa pag share. It would be very helpful to those who needed this. God bless.

[@BassSwirls]

Nice film. No unnecessary banter ...just what you need to know.

[@RgezMTB]

Thanks!

[@marygracerodiltv1683]

Another blockbuster how to tutorial. Way to go RGEZ MTB.

[@albie6662]

Its interesting video. may bagong kaalaman

[@rhizzaq.663]

Galing naman salamat sa pagbahagi ng video na ito.

[@shytot3114]

thanks for sharing..daming kong natutunan about sa bike.

[@hernanleesabangan8618]

Ive have tried this process so many times but still didnt get the right lever pull & brake bite. I suggest you do this procedure but afterwards, you have to do the suction process at the lever. I was even thinking my magura mt7 pro is defective since i could not get the correct lever pull at the rear brakes. The front brake lever has no problem, i tried switching it to the rear but still has not enough lever pull/bite. Maguras are really great brakeset 👍 Enjoy your ride & be safe always 😇

[@RgezMTB]

With my setup, I transferred Magura brake into new frame, cut and bleed using the same process, works like a charm. If your MT7 is under warranty try contact your Magura or authorized LBS.

[@petedivine]

I had the same problem with my rear Magura MT7. The trick that worked for me was to elevate the front of the bike to a vertical position relative to the rear. Then squeeze the handle. You'll notice the increased bite. While awkward you can then do the suction process while the bike is vertical. I had to do this twice, but fixed the brake issue. I think air gets trapped in the longer hose assembly and raising the front of the bike forces the air bubbles up to the brake handle where the suction method can be successful.

[@mtb_konaaa]

Is it effective if I don't lift the motorcycle every time?Or is it okay if I do it once and then no more? I am sorry if there is anything strange about the sentence, as I am translated by a Japanese

[@yourdayscontentvlogs4373]

Not a magura fan pero nice din ito pra aa mga gusto magbleed ng brakes nila na mahura...nice vid paps

[@RgezMTB]

Salamat bro 👍

[@vanrazer2337]

Ang ganda! Love the color RGEZ!

[@CarloNicolai]

Nice video sir! ang ganda ng brakes niyo may natutunan din ako sa magura ah pero next time ang blbleed ko shimano pa lang muna po

[@RgezMTB]

Tnx bro, madali lang mag bleed basta may bleed kit.

[@bebejanebrizo9706]

Ganyan pala un.. thanks for sharing lods

[@desertgoat1395]

Ayus paps.sakto need ko magbleed .ng palit ako ng rear caliper ng mt trail ko.ginawa ko ng 4 pot 😁

[@RgezMTB]

Thanks lods

[@easyridetv8183]

Parehas tayo ng brake ganyan pala ang process pag bleed.. may kaalaman ako nkuha

[@RgezMTB]

Madali lang process, matagal lang ang lumabas ang bula.

[@CHILLRIDES_MTB]

What type of pad compound is the MT Trail using? Resin?

[@RgezMTB]

The Magura MT Trail uses organic (resin) brake pads: 9.P Performance for the front and 7.P Performance for the rear

[@MaryGraceRodilTV]

Thanks for this tutorial RGEZ.

[@aivlogs3254]

nice tutorial..its a big help ..thanks for sharing

[@molley17]

How have these brakes held up? Would you say they are worth getting, I currently have the budget Shimano 4 pots are they better then them?

[@RgezMTB]

For awesome modulation and smooth braking, the Magura MT Trail brakes are a top pick, especially if you upgrade the pads. But if you want raw power and reliability on a budget, stick with the Shimano 4-pots. I have Shimano 4-pots on my other bikes too, and they’re solid.

[@RoxxTrip]

Yown may natutunan na naman.. Nice sir.

[@RgezMTB]

Tnx idol 👍

[@trailmaster]

Nice vid bro. Di ko pa na try mag bleed ng magura. shimano at sram pa lang.

[@RgezMTB]

Tnx bro, pareho lang procedure, sa torque lang siguro nagkaiba?

[@newday8191]

Amazing and interesting too, thanks for this video

[@ememkidsblog8556]

impressive! thanks for this tutorial,,,

[@mastertronics95]

nice one idol . ganda ng magura brakes

[@RgezMTB]

Tnx idol. 👍

[@allaboutlifehacks6786]

Interesting tutorial, thanks again

[@zion7762]

Nice! Bro, if don’t mind bro paano mo install yong rear calliper mo? Thanks

[@RgezMTB]

Itong setup ay 203mm rotor, kailangan mo ng bracket na pang 203mm, yung model ay magura QM9. Bolt-on mo lang yung caliper pero wag mo muna higpitan, press mo yung brake para mag center align ang caliper, tsaka mo higpitan.

[@zion7762]

Good day bro. If you don’t mind anong brake adapter mo sa harap? Salamat in advance bro..

[@RgezMTB]

Shimano gamit ko bro, 203mm Post Mount. (SM-MA-F 203 P/PM)

[@zion7762]

Good day bro, tanong ko lng bro wala naman akong na kita na bubbles. Anong ibi sabihin na bubbles? Thanks in advance

[@RgezMTB]

Di masyado nakita sa video, may naka pasok na hangin sa loob, maliliit sya, kailangan palabasin para di maging malambot pag preno. Salamat Zion sa Pag dalaw

[@mtbmoto3833]

Watching bro. Yap I only use Magura blood or royal blood as well wala ng iba. Super

[@RgezMTB]

Pag-ginamitan kasi ng ibang parts, ma-void ang warranty, sayang naman yung 5 years warranty.

[@mtbmoto3833]

Correct bro. 8yrs na MT6 ko magura blood pa din gamit ko bro hehe

[@gwapongpadyakero7989]

Thanks for sharing 👍

[@RgezMTB]

Welcome bro 👍

[@starmostarmo3711]

I did the same thing but I didnt get any leaver pull:(

[@RgezMTB]

It took me longer than the video. Need to remove all the bubbles from the hose. Also need to flick the brake lever from time to time, it helps remove the bubbles too, but do not press all the way.

[@andihanpasri]

Nice video.. thanks for sharing..

[@RgezMTB]

Thank you too 👍

[@bikolcouple5912]

Ayos idol..

[@RgezMTB]

Tnx 👍

[@padyakeroUK]

nicely done bro...

[@RgezMTB]

Thanks bro ✌️

[@ChebTV102]

Support kapadyak

[@RgezMTB]

Salamat bro, much appreciated ang support. 👍

[@anglumangsiklista]

Very nice. So useful! 👍👍👍

[@RgezMTB]

Thank you! Cheers! 👍

[@sphitzvidz]

Nice vid tutorial idol. Thumbs up!

[@RgezMTB]

Tnx idol 🤘

[@pitikletachannel]

Ayos sa vid

[@RgezMTB]

Appreciated lodi.

[@enJHOYlife]

awesome job bro... it would be very beneficial video who loves biking. #enJHOYlife

[@amazingreen5397]

Brake it to me gently

[@easyridetv8183]

First bro

[@RgezMTB]

Legend! 👍