How to Bleed Your Brakes

1A Auto shows you the procedure for bleeding brakes and includes some tips that will help you complete the task easily and safely.
🔧 List of tools used:
• 10mm Wrench 1aau.to/onu/1AX...
• Brake Fluid
For More Info visit us at 1aau.to/h/aYH/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@1AAuto]

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

[@Outlawbuckettrucker]

hook a small hose to the bleeder screw and run it into your drain bucket and there'll be a lot less cleanup and you wont get brake fluid all over the customers car.

[@jimb2654]

Normally I am a big fan of your videos but this seems rather shoddy work. It is messy without using a hose and bottle attached to the bleeder nipple and the brake fluid is corrosive so not advisable to have it running all over the brakes. Leaving in a clogged bleeder screw is bad form as it indicates something more significant is going on in that caliper which should be addressed.

[@1AAuto]

+Jim B Thanks for the feedback!

[@innocentmamoune8186]

A simple test can be done while he did it also.. remove the clogged bleeder screw, find a needle simple put it where the bottom hole is on the bleeder valve then clean it out.. might not even need to be replace. . The cause of clogged needle might be a ruster old

[@cbgreely]

great video...thanks

[@pcdetail602]

Do I leave the cap off the master cylinder while pumping or one while pumping ?

[@wearefaithclan]

Do you have to do it to all the brakes or can you do it to one ?

[@JosephDR]

You need to do all the brakes since they are all connected at the master cylinder

[@sanchezfran9852]

I'm about to replace front drivers side brake caliper, should I bleed caliper first after install, or start from rear right side? Good work with the vids, a good portion of my repairs have been performed watching these videos, you guys usually give torque specs too, I respect that, keep up the work, I may have some requests for you soon!

[@1AAuto]

+Sanchez Fran Thanks for checking us out. Have a great day! 1aauto.com

[@aarontapia6261]

Does the car have to be on while your bleeding the brakes?

[@BloodoftheProphets32]

No, it does not. Engine off is generally how it's done actually

[@infinitig3549]

hey man.I broked the nipple where you bleed the brakes when I was trying to open it is there an other way to bleed it?

[@dapho6287]

Should the car be on or off while bleeding the brakes?

[@1AAuto]

+daph O You can just turn it off no reason to waste gas if you don't need to.

[@dapho6287]

Thank you!

[@1AAuto]

+daph O You're very welcome!

[@paul-andrelarose3389]

Pls use safety goggles. 2022/09/02.