Рет қаралды 9,180
Want to keep your hay dry and more contained? Then build this easy DIY structure yourself and don’t spend the money on a $1000 hay hut!
Tools Needed:
Miter or Circular Saw
Drill
Level
Tape Measure
Angle Grinder with Cutting Wheel (if using metal roofing)
Material List:
(4) 4x4x8 (PT)
(4) 2x6x12 (PT)
(7) 2x4x8
3 Inch Deck screws
(2) roofing panels (ondura, metal etc.)
Roofing nails or screws
Cut list
Cut one foot off (2) of the 4x4x8
Cut the 2x6x12s in half (measure from both ends)
Cut 4 inches off 5 of the 2x4x8s
Cut (2) 2x4x8 to 1 inch shorter than length of roofing panel
Link to plans used
www.dutchhollowacres.com/2013...
I loosely followed these plans as I had some material around the farm I used on this project. Most importantly is that I did not want this up against the fence. (Horses will fight over who has the best position for the hay). I decided to put a horizontal piece on all 4 sides instead of 3 like the plan above calls for. The tallest side horizontal piece is only held in by one screw on each side to allow loading of bale.
Thank you for watching and please let me know if you build it!