How to build a crank organ

[@bumpermanthesecond615]

Came here from fishtank's video

[@peterers3]

Thank you so much for the detailed explanation. I wondered how the organ would detect notes and the pressure drop system is just genius! Amazing sound and simple to build.

[@puncrock2952]

It's ingenious, yes. Amazing sound tho? I'm pretty sure the 3rd or 4th level of hell plays only barrel organ eternally while the dancing monkeys fling flaming turds at the doomed souls condemned

[@blahblahblahblah2837]

I love it!!! Great work on the video, the construction and the documentation! I wish we had more of these in Australia. I saw one in Saxony and my girlfriend could hardly pull me away from it! So magical and the music so joyful!

[@roberthaines4221]

What an amazing video! It's so generous of you to share this information to others. Thank you!

[@Professorvapes]

thanks for this video I was given some plans over 30 years ago and started the project but sadly due to life being so busy never finished the project I am now in a position to start over with some spare time and this seems to be the way to go.

[@mattska01]

thats a very good explanation. and the little tune used in this video makes it all wrap up perfectly, i love it

[@antoinebihr1792]

Bravo titi ! Wonderful build, very well explained, and nice sound !

[@temmietemmieson6756]

Merci infiniment! Je vais m’y essayer, c’est vraiment bénévole et attentionné de nous faire part gratuitement de votre savoir et de votre expertise.

[@titigermain]

La notion du partage gratuit se perd un peu, mais pas pour nous....

[@gorillaau]

Well done. I would struggle to find a long roll of paper long enough.... don't havs the time but glad that someone has documented this technology.

[@mascheratoh]

gondal music

[@thepsychedelicaxolotle5020]

thenk you ! this is beautifall ! for my opinion this is one of the most special hobbies in the world and i am so happy that i can know how to build one myself ( i am currently learning woodworking and i hope to develop it into something greater , maby barrel organs . )

[@michaelstow2940]

You are some kind of genius. Thank you very much for the free downloadable instruction book.

[@chamberashes3128]

I want to build my own. This will be the start of my research Thank you

[@maxthemurdererv2]

Gondal

[@matsudaindustries2530]

Thanks for detailed explanation, never thought of a pressure sensor tracker before that was amazing

[@jennielyra3694]

Thank you for your time and effort, just downloaded the how too book!

[@b0b0zz71]

A QUESTION IS HOW DO they get other instruments on the organ like a xylophone or drums work

[@JesterWhoHelps]

air pushes a hammer to strike the object just the same as the air pushes through the musical pipes

[@NEEDSHES]

Awesome!!!

[@noelaruldas1152]

Thank you very much!

[@davinpaz1871]

Im so fucking serious this song was stuck in my head for an whole APUSH AP exam.

[@Zane-It]

I've been looking for a non electronic version of this DIY guide because I am curious as to how these where made back in the day.

[@angelsone-five7912]

That`s wicked, love it. I like the ingenious use of a clothes peg!

[@johnhutchison6144]

Fantastic video! Could you PLEASE tell me the name of the last piece of music in your video?? 😊

[@titigermain]

Last song is MEXICO sung by Luis Mariano

[@johnhutchison6144]

@@titigermain Cheers!😀

[@Mara.J.Spencer]

What a Legend ! Bravo 🎉

[@tomasgonda1250]

Amazing work! But can you describe how to make the organ books?

[@titigermain]

Hi, All informations can be dowloaded from our website orguesquimperois.free.fr/ every thing is free @+ JC

[@titigermain]

Hi, I think my last answer is not correct, because probably you talked about the the organ books and not the description book we wrote. It is quite difficult to make organ books. You need a punch machine which is not an easy task, but you need to have a large knownledge of musical theory to adapt any song to a midi files with only 29 notes. Maybe a friend of yours ca make the job for you.

[@katelikesrectangles]

amazing! what lovely work!

[@emirhanozkan32]

Oh my god i always wanted to listen stuff like this i wonder if there is a genre for this type of songs

[@titigermain]

Yes In France, we call this king of music "Opérette" So type "opérette" in the youtub search bar, then you will get plenty of similar music

[@emirhanozkan32]

@@titigermain I am interested in the instruments voice tho is there a genre where only this instrument being used

[@tha_sorgen]

fishtank tf2

[@oscarhuntproductions]

Thank you so much! So cool that the instructions are all free!

[@pikayo123]

This is amazing, thanks so much for sharing!

[@magfu6477]

please make a video, how to make each part of this machine

[@titigermain]

Hello, it would take too long time to make a video. that the reason I wrote a manual which describe step by step how to build your crank organ here is the link : orguesquimperois.free.fr/organ%20construction%20manual.pdf best regards

[@zeke7100]

[edit:] I notice you seem to have direct access to the actual 3d models used in the pdf and I don't seem to find any access to said files. If you do see this, I'd like to know if you still have them and would be willing to share. this is awesome. Years of searching and now that I've got a 3d printer, I think I'm going to attempt to make something like this. The instructions are pretty clear and explain dimensions well, so using cad software should make this super easy. I am quite curious how a 3d printed pipe organ would sound though compared to wood or metal.

[@titigermain]

Many thanks for your feedback. Of course, I agree to share 3D files. They have been generated by the SKETCHUP software. Give me an email adress , and I will forward the 2 two files (one for each layout of organs) I have to draw your attention to one point. Some parts of the drawing may not have been updated. At first, I made drawings, but sometimes when I assembled parts, I have to modidy slighly some details without mofication on the blueprint. Best regards, Jean-Claude. PS : By the way , where are you from ?

[@zeke7100]

@@titigermain yeah idk what to do. I've tried sending you my email in various ways and youtube just blocks it because it doesn't allow sending emails. I'm from florida, but I'm currently residing in montana.

[@titigermain]

Hi In the past I also faced the same problem when I wanted to share an email adress So there could be a solution in your web browser type "les doigts toniques" It is the name on my musical band. Click on the link in the top of the result page. (The full name of the link is LES DOIGTS TONIQUES - Quimper) Go the contact page and you will see an email adress. I hope it will work Best regards Jean-Claude

[@mantatso]

Thank you so much

[@raptyrn1290]

Is there a name for this particular song, or a full recording of it that doesn't cut out at 4:28?

[@titigermain]

The song is "MEXICO"

[@raptyrn1290]

@@titigermain Thanks!

[@cso49]

Muchas gracias.

[@josephfoster3819]

So , simple, but complex actually . Alot of parts working together here

[@cordobajvr]

Names of each music?

[@titigermain]

1st song = Félicie Aussi 2 nd song = Mexico 3 rd song = Mon manège à moi

[@APumpkinSpie]

im trying to find this music

[@Offshoreorganbuilder]

Excellent video.

[@melodyhappywish]

Bonjour, je vais essayer de construire un orgue de barbarie à partir de vos instructions, je voulais savoir si vous pensez que l’orgue fonctionnerait si j’utilisais du pmma ou du plexiglas pour construire les flûtes et l’ensemble de l’orgue. J’aimerais aussi installer un système midi à la place du lecteur de carte mais je ne trouve pas de ressources pour en construire un soi-meme, peut être avez vous une idée d’où je pourrais trouver ces ressources. Je serais ravi de recevoir une réponse, bravo encore et merci pour ces instructions partagées à tous. Noé Leleu.

[@titigermain]

Bonjour Noé si l'on tient compte que les flûtes à bec sont souvent faites en plastique, on doit pouvoir faire les flûtes de l'orgue en plexi. Reste à en faire une en test pour valider la sonorité. Mieux vaut avoir une découpeuse laser ou une CNC car il y a beaucoup de pièces à faire. concernant le système midi, voici un lien vers une réalisation très pro... orgue-de-barbarie.pagesperso-orange.fr/carton_elec.htm cordialement Jean-Claude

[@melodyhappywish]

Titi la Bretelle merci beaucoup pour ces conseils. Dans le projet que je développe, mon but était de ne pas avoir de lecteur de cartons (que j’affectionne pour autant) et de le replacer totalement par un système midi directement raccordé aux flûtes. J’ai vu ce genre de systèmes mais sans réussir à trouver des instructions, une idée par rapport à ça? Merci beaucoup. Noé.

[@titigermain]

voici un lien en France pour le carton électronique orgue-de-barbarie.pagesperso-orange.fr/carton_elec.htm

[@possummanrld]

That is awesome!

[@leeanncotrone8369]

Really nice like a circus organ merry go round

[@aceystar1478]

Calliope

[@conroynathan3024]

very intriguing. sounds like a mario land song

[@SharkStrikeAC]

Same digital midi player.

[@phonotical]

I'd love to try but the construction of custom music rolls is stumbling me a little, and the uhh feed area😅

[@theswerve2898]

Don't worry about making your own music rolls. Just build your own organ and when you have got it to 'sing' it will take for ever to get rid of the smile on your face !

[@phonotical]

@@theswerve2898 😊 I was thinking about it just this morning, thanks!

[@asolidwith120edges]

now show me how to crank 90's

[@bertsweep6544]

Where do you get the music books after you build it

[@titigermain]

You can place an order to a company which is able to arrange midi files and make the punch job. In France, there are a few companies to do so.

[@christianindividual4550]

0:50

[@dennisspinkshappyforbusker2523]

Jolly good!

[@FlipperSynth5]

Rest Easy Gondal

[@somebodythatiusedtoknoooooooow]

This video is going to get a lot of views, crank organs are trending :)

[@TankleKlaus]

I dunno about that, I mean I found my way here but I doubt many others will

que increibleee! gracias :)

[@richardturner6981]

i love it

[@emirhanozkan32]

i really wanna know the name of that song that starts in 3:11

[@titigermain]

The song is MEXICO

[@emirhanozkan32]

@@titigermain I cant find it on youtube 😔

[@titigermain]

@@emirhanozkan32 HERE IS A LINK kzbin.info/www/bejne/p37Od4Bsra6Dh5Y&ab_channel=LuisMariano

[@emirhanozkan32]

@@titigermain Well i guess it sounds way better on crank organ haha

[@claudiog.nogueiras2323]

magic!

[@ABoyNamedVoncit4753]

I’m trying to make an instrument something just like that, but I never knew that much stuff will be in there😱

[@ItsDylanHarding]

what’s the name of the second song?

[@ItsDylanHarding]

or rather all of them if you know

[@wreckstoracecars]

Nice!

[@velcroman11]

The BIG QUESTION is where will one find books?

[@titigermain]

Hi, It is quite difficult to make organ books. You need a punch machine which is not an easy task to built, but also you need a large knownledge of musical theory to adapt any song to a midi files with only 29 notes. JC

[@archathaz]

what song is this? x

[@titigermain]

Songs are : Félicie aussi Mexico Tu me fais tourner la tête

[@Brass319]

funy song

[@kajetkawa6024]

Name of the program ?

[@titigermain]

Hi, For all drawings, I used Sketchup program which can be found for free on the web Where are you from ? Here is my email : [e-mail] for more information

[@kajetkawa6024]

+titigermain I from Poland :D i try Build organ witch pcv pipes, glass bottles, school flutes and for pressure, vacuming :D

[@titigermain]

The program is PERFO U Here is a link to a french website made by the author : orgue-de-barbarie.pagesperso-orange.fr/ @+ JC

[@dennisspinkshappyforbusker2523]

nice work dude😉

[@LSnium]

I love this video but its something that i can never make in my liftime.

[@temmietemmieson6756]

Attendez... mais c’est Félicie aussi du grand Fernandel! :D

[@miorieser3210]

Erste Sahne!! BG aus G. in D.

[@fivegeese6342]

Hi Doug :)

[@davewettlaufer7885]

i think that is coool

[@entirestallion6722]

3:12

[@apxpandy4965]

Love your work, but with that shot of you standing behind the organ, with just your head showing, I wasn't sure just 'what' you were cranking! rofl!

[@ArnoldVeeman]

LOL

[@gregm8440]

but Honey, I think I can do this, and we could retire...

[@AsherBarkin]

Or retire. Lol

[@rhiannonangell6828]

I am sure that you will find good way to make it on woodprix Webpage.

[@mandarin1257]

Noice, but why did you have to make the font 'comic sans'

[@proxy_oo]

Gondal