How to build a Drone that needs NO Battery? Wireless Energy DRONE

[@PlasmaChannel]

This video is incredible Leon. It definitely deserves a magnitude of views greater than what it received. Wonderful work. I'll share with my subs in a few days.

[@Teslaundmehr]

Jay! Thank you so much, I really appreciate your support! You are the best ;)

[@piercebishop4052]

I agree. Maybe he should drop the Cringe intro.

[@Teslaundmehr]

I wish you a happy new year guys!!!

[@redingenieur7334]

Thanks you and in your next video can you make a QCW tesla coil pls ?

[@jacobsobymadathil325]

Happy New Year to you too Leon!! Hope 2022 would be the best year for your channel!!!

[@power45118]

Happy new year🎉

[@Teslaundmehr]

@@jacobsobymadathil325 Thank you so much, really appreciate that!!

[@Teslaundmehr]

@@redingenieur7334 yes in future!

[@smburhan6323]

Happy new year!! Btw thank you for using English, helped a lot ,♥️♥️

[@Teslaundmehr]

Thank you! No Problem my Friend!!

[@LabCoatz_Science]

Nice work Leon! I was kinda worried about interference from the power transmitter, but I'm glad to see you got it working. Have you considered using a much larger/more powerful transmitter (maybe a Tesla coil, if it doesn't cause too much interference) to transmit power far enough to fly the drone for longer distances?

[@Teslaundmehr]

Hey Zack! The remote control send on round about 2,4GHz. So that is not a problem. But when we use a Teslacoil as a Transmitter, than it could be a Problem,, especially when we use a Spark Gap coil haha :D

[@alexpaciniat]

Well done! And, this video brings back very good memories from the time spent at Imperial :) I remember that drone quite well!

[@Teslaundmehr]

Thank you!!

[@CoilLabs]

This is awesome! Of course the interesting things happen when you don't have the camera running, haha. Now that you don't have the controller, I wonder if you could get some level of "self stabilizing control" back by using a separate transmitting and receiving coil for each individual motor. As it moved up and down each motor would kind of self regulate because it would move farther and closer from its transmitting coil. You would need 4x the circuitry though, so that might get too heavy. This was really fun though, looking forward to what's next!

[@Teslaundmehr]

Thank you so much!! I'm glad that you enjoyed the video! That is actually a pretty cool idea! But I'm not sure if the 4 Transmitters will influence each other...Would be interesting to test it!

[@CoilLabs]

@@Teslaundmehr Yeah maybe you would only need 4 receivers and could still have a single, large transmitter. Still have the weight problem of 4x the circuitry on the drone though, so that may still be impractical.

[@nripeshkumarmishravinayak664]

Amazing , you deserve more subscribers.

[@Teslaundmehr]

Thank you!!!

[@tatemcaluney7269]

That was so cool and the outtakes were a lot of fun! I relate to messing up what you want to say hahah

[@Teslaundmehr]

Haha I'm glad that you liked it! ;)

[@nghiemnguyen4296]

Happy new year 😍

[@Teslaundmehr]

Thank you ;)

[@ArcAngelTeslaCoil]

Great work!! Have you tried using a Tesla Coil for wireless power? Have had good luck with long distance and not having to be in close proximity just a idea, keep up the great work and the explaining the details. Also happy new year ⚡⚡

[@Teslaundmehr]

Heyy, thank you so much, really appreciate that! This is actually a great Idea, but maybe the electrical field would be way to strong. Also interesting would be one wire energy transmission ;)

[@ArcAngelTeslaCoil]

@@Teslaundmehr it may be but with a zvs powered tesla coil you can adjust the power level but the frequency you choose would made the difference probably. Know when I was playing with this never tried a bipolar and any higher than about 350khz zvs didn't like it. It's great your playing with this concept, I had alot of fun playing with this transmission of power want to get back to this some time in the future believe there is alot of can improve especially seeing your video⚡⚡ my best so far is 26% efficiency at just over 5 feet and the receiver coil was picking up 14v at 2amps.

[@chevytheplayer]

surprised this video doesn't have a million views

[@baleylavarta2573]

I've enjoyed watching your experiments. This is very similar to a failed experiment of mine. I hope you have better luck on the end.

[@Teslaundmehr]

Thank you!! Next step is to make a new HF transmitter

[@baleylavarta2573]

@@Teslaundmehr That would probably made a big difference. I wonder if one could use microwaves for transmission? Although that could easily become a problem rather fast!

[@Teslaundmehr]

@@baleylavarta2573 Yes, microwaves would be awesome. When we use for example a parabolic mirror, we can concentrate the beam, but that is dangerous haha

[@TheOfficialOriginalChad]

Incredible idea, execution, and video production. The only thing you didn’t explain is how you created a wireless drone without 1,000,000 views on board.

[@sagbuilds7248]

Really nice video, very exciting until the end. I am very excited about the following videos :D

[@Teslaundmehr]

Thank you brother!!!!!!

[@NBspark]

Happy new year⚡⚡⚡

[@Teslaundmehr]

Thank you bro!

[@riverrist]

Ich denke, du kannst den 3d gedruckten Rahmen für die Spule an der Drohne viel dünner machen.

[@Teslaundmehr]

Ja das wäre eine Möglichkeit, allerdings wiegt der nur 6 Gramm. Am schwersten sind die Caps, die müssen kleiner ;)

[@OfficialyMax]

If you make some sort of portable platform for it to hover over, keeping the drone stable above it could be a fun little game :D

[@axelbelleris]

If you used a voltage regulator, why the dron died? So amazing and interesting proyect. Maybe, it could get more reach if you build a enoughly big and powerful Tesla coil that allow the dron flying around inside the room. Would you like try to do it? That would be super exciting! Greetings from Argentina! 🇦🇷 (Sorry if my English is not very correct).

[@cseblivestreaming]

Hello Leon, I must say I’m very impressed by all the things you do and it’s been an inspiration. Next year I have my „Matura“ (Swiss) and for this we need to do a project. I wish to do the project on building my own tesla coil(s). Any Tips?

[@Teslaundmehr]

Hey, thank you!!! Building a Tesla coil is always a good Idea. The Type of the coil depend on your skills, SGTC is esay, DRSSTC is more complicated but way cooler ;)

[@MasterIvo]

Great Video Leon! Wireless charging. brilliant idea ;) love to see the result in the next video

[@Teslaundmehr]

Thank you Ivo!!

[@tomeaston2962]

try the main rotor structure of a 3 channel toy helicopter. those setups resist change, making them stable in the air without the need of a flight controller(except for the yaw, but wiring the motors in parallel should allow them to spin at the same speed, yaw is probably not a problem)

[@Teslaundmehr]

good idea!

[@piconano]

What would happen if you pulse the coil you have around the quad at 7.83 Hz, with as many Amps you can muster? 7.83 Hz is the Earth's resonant frequency. Would it lose or gain any weight without the motors attached? I wish I had the means and your setup to test that. Happy near year and thanks for your super interesting videos.

[@Teslaundmehr]

This is an interesting concept I have thought about in past. The Problem would be to set the Resonance Frequency of the receiver so low. For that you need a big capacitance or a big coil (a lot of windings) to transmitt enough energy. But nevertheless the Schumann resonance is an amazing topic!

[@androidfixer4413]

Tesla will be proud of you ✌️

[@Teslaundmehr]

Oh that you! 😋

[@androidfixer4413]

@@Teslaundmehr can i use tesla candle as camping stove? How can i control its heat?

[@Teslaundmehr]

@@androidfixer4413 I think it would be unefficient. Use Induktion heating

[@Basetonic]

Nice! If this just had any usecases! :'D

[@TeslaExplorer]

Excellent work!

[@Teslaundmehr]

Thank you Bro!!!

[@motherjoon]

Make a ZVS driver with mosfet gate drivers so the gate voltage rises more sharply and further reduces losses. Also maybe make a megahertz ZVS drivers with some exotic transistors like GaN

[@Teslaundmehr]

Awesome Idea, I would love to work with GaN or SiC :)

[@Egzoset]

@@Teslaundmehr GaN, for its exceptionally-light "nC" gate figures.

[@michaelcre8]

To go higher can you transmit more power farther with a bigger transmitting coil and hang the power receiver circuit and coil down below the drone? Would a bifilar coil improve performance? A bifilar coil has much more capacitance than the spiderweb coil if that's why you used the spiderweb coil. And didn't Tesla patent a bifilar coil?

[@Teslaundmehr]

Hey, great Idea! I think I need a different transmitter, higher frequency and so an. I dont now much about bifilar coils, I will do some research! Thank you!

[@michaelcre8]

​@@Teslaundmehr If you make a much bigger coil then the drone will be inside it while it's flying. If a bifilar coil doesn't increase the power transmission maybe a second coil inside the first one would.

[@ostanin_vadym]

Thanks for the content

[@Teslaundmehr]

Thanks for the Support!!

[@nicholaskukushin6626]

Danke sehr technologisch fortschrittlich Video. Wie viel kostet die clamp-meter 210E in Deutschland?

[@derwissenskiosk8041]

Ungefähr 50€ Im Angebot manchmal günstiger...

[@nicholaskukushin6626]

@@derwissenskiosk8041 Vielen Dank für die schnelle antworten!

[@twins1225t]

How about using supermalloy to the center of the coil on the drone? To consentrate magnetic field~

[@Teslaundmehr]

Good Idea, but we must choose a material that is made for HF ;)

[@eli64311]

Good video

[@Teslaundmehr]

Thanks!

[@TheOfficialOriginalChad]

I would like to see you attempt this with beam forming…

[@blanana_m]

Can you use a microwave for transmission in a video?

[@Teslaundmehr]

Haha I would be a little bit dangerous, but efficient :D

[@apurbakumarsen9036]

Amazing. I've already try it But my zvs drive are not steel for it can't work's perfectly 😶

[@TowfiqAhmed3ELab-Bogura]

what is the size of the coil ? and wire gauge size ?

[@ismaelgoldsteck5974]

This concept is actually used to charge delivery drones without them having to land.

[@Teslaundmehr]

yes that is pretty cool!!

[@ethanslab7670]

i made a tesla coil, i ran it on 50v. instead of the tesla coil blowing up, the power supply blew up.

[@Egzoset]

This sort of issue was reported over a decade ago. In recent years EXTERNAL protection was added but i regret it's still just not integrated INSIDE the power loop itself. So please consider reading Allegro's datasheet on their responsive (MHz) ACS733 hall-based current-monitor which happens to be featured with an on-chip analog-programmable comparator: e.g. possibly an improved alternative to the usual cross-connected diodes... 2 units would be expected in Mazzilli's "Center-Tap" topology.

[@noora_r]

du könntest eine starke tesla spule auf wireless optimieren und damit die drohne poweren ;)

[@Teslaundmehr]

Wäre eine super Idee, könnte nur sein, dass die induzierte Spannung etwas hoch wird

[@memesfrommygallery5364]

Nuice

[@Teslaundmehr]

Thanks!

[@jafinch78]

I've wondered how light can get a not wireless powered by a microwave oven literally design similar to the "Can a microwave power a plane? - Bang Goes The Theory - BBC One" KZbin video. I've wondered about using lighter foil, foam or a lighter frame that's maybe not a foam styrene... though I'm thinking whatever is lightest and strong enough to be the antenna and parts of the actual drone. Wondered what an inductive mathematical analysis would determine as well. Maybe fractal antenna design or something a little wider band with polarity consideration also in the antenna design. Spiral conical if not a foil on foam fractal... maybe even mesh so like a polymer with the foil embedded in thin sheet rolled to get more of the penetrating photonic energy a well for being the structure?

[@AkPK369]

But camera drone want software ?

[@aeiou1w]

Nice concept but you use a alternative source of power....The idea I was looking for was grabbing instant power from air

[@kirill2525]

should have made the electricity go to a super capasiter that can store energy so that it could act as a battery as the drone would go out of range so it wouldent just crash but hover down slowly untill it got back in range of the power

[@lukiepoole6701]

Parametric coupling has infinite range Lol

[@Teslaundmehr]

not so easy to realise :D

[@brymstoner]

now remove the props - em flight. or step it right up and quantum entangle some batteries.

[@kelektro0125]

Haters could say, you are using those thin copper wires to deliver power :D :D at 6:50

[@Teslaundmehr]

Haha I'm not a cheater ;)